Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 14
Star 1
Fork 0
R
raspberrypi-kernel
提交 de4148f3 编写于 作者: R Ralf Baechle
浏览文件
操作

MIPS: eXcite: Remove platform. 

The platform has never been fully merged 
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
上级 c3d8d850
隐藏空白更改
内联 并排
Showing with 0 addition and 3912 deletion
arch/mips/Kconfig
浏览文件 @ de4148f3
...@@ -50,23 +50,6 @@ config AR7 ...@@ -50,23 +50,6 @@ config AR7
Support for the Texas Instruments AR7 System-on-a-Chip Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300. family: TNETD7100, 7200 and 7300.
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
select CSRC_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select IRQ_CPU_RM9K
select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help
The eXcite is a smart camera platform manufactured by
Basler Vision Technologies AG.
config BCM47XX config BCM47XX
bool "BCM47XX based boards" bool "BCM47XX based boards"
select CEVT_R4K select CEVT_R4K
...@@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD ...@@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
endchoice endchoice
source "arch/mips/alchemy/Kconfig" source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/bcm63xx/Kconfig" source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig" source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig" source "arch/mips/lasat/Kconfig"
......
arch/mips/Makefile
浏览文件 @ de4148f3
...@@ -368,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ ...@@ -368,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
#
# Basler eXcite
#
core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
# #
# LASAT platforms # LASAT platforms
# #
......
arch/mips/basler/excite/Kconfig 已删除 100644 → 0
浏览文件 @ c3d8d850
config BASLER_EXCITE_PROTOTYPE
bool "Support for pre-release units"
depends on BASLER_EXCITE
default n
help
Pre-series (prototype) units are different from later ones in
some ways. Select this option if you have one of these. Please
note that a kernel built with this option selected will not be
able to run on normal units.
arch/mips/basler/excite/Makefile 已删除 100644 → 0
浏览文件 @ c3d8d850
#
# Makefile for Basler eXcite
#
obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
excite_device.o excite_procfs.o
obj-m += excite_iodev.o
arch/mips/basler/excite/excite_device.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/err.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <asm/types.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
#include <rm9k_eth.h>
#include <rm9k_wdt.h>
#include <rm9k_xicap.h>
#include <excite_nandflash.h>
#include "excite_iodev.h"
#define RM9K_GE_UNIT 0
#define XICAP_UNIT 0
#define NAND_UNIT 0
#define DLL_TIMEOUT 3 /* seconds */
#define RINIT(__start__, __end__, __name__, __parent__) { \
.name = __name__ "_0", \
.start = (__start__), \
.end = (__end__), \
.flags = 0, \
.parent = (__parent__) \
}
#define RINIT_IRQ(__irq__, __name__) { \
.name = __name__ "_0", \
.start = (__irq__), \
.end = (__irq__), \
.flags = IORESOURCE_IRQ, \
.parent = NULL \
}
enum {
slice_xicap,
slice_eth
};
static struct resource
excite_ctr_resource __maybe_unused = {
.name = "GPI counters",
.start = 0,
.end = 5,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_gpislice_resource __maybe_unused = {
.name = "GPI slices",
.start = 0,
.end = 1,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_mdio_channel_resource __maybe_unused = {
.name = "MDIO channels",
.start = 0,
.end = 1,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_fifomem_resource __maybe_unused = {
.name = "FIFO memory",
.start = 0,
.end = 767,
.flags = 0,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_scram_resource __maybe_unused = {
.name = "Scratch RAM",
.start = EXCITE_PHYS_SCRAM,
.end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_fpga_resource __maybe_unused = {
.name = "System FPGA",
.start = EXCITE_PHYS_FPGA,
.end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_nand_resource __maybe_unused = {
.name = "NAND flash control",
.start = EXCITE_PHYS_NAND,
.end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
},
excite_titan_resource __maybe_unused = {
.name = "TITAN registers",
.start = EXCITE_PHYS_TITAN,
.end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
.flags = IORESOURCE_MEM,
.parent = NULL,
.sibling = NULL,
.child = NULL
};
static void adjust_resources(struct resource *res, unsigned int n)
{
struct resource *p;
const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA;
for (p = res; p < res + n; p++) {
const struct resource * const parent = p->parent;
if (parent) {
p->start += parent->start;
p->end += parent->start;
p->flags = parent->flags & mask;
}
}
}
#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
static struct resource xicap_rsrc[] = {
RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
};
static struct platform_device xicap_pdev = {
.name = XICAP_NAME,
.id = XICAP_UNIT,
.num_resources = ARRAY_SIZE(xicap_rsrc),
.resource = xicap_rsrc
};
/*
* Create a platform device for the GPI port that receives the
* image data from the embedded camera.
*/
static int __init xicap_devinit(void)
{
unsigned long tend;
u32 reg;
int retval;
adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
/* Power up the slice and configure it. */
reg = titan_readl(CPTC1R);
reg &= ~(0x11100 << slice_xicap);
titan_writel(reg, CPTC1R);
/* Enable slice & DLL. */
reg= titan_readl(CPRR);
reg &= ~(0x00030003 << (slice_xicap * 2));
titan_writel(reg, CPRR);
/* Wait for DLLs to lock */
tend = jiffies + DLL_TIMEOUT * HZ;
while (time_before(jiffies, tend)) {
if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
break;
yield();
}
if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
xicap_pdev.name, DLL_TIMEOUT);
retval = -ETIME;
} else {
/* Register platform device */
retval = platform_device_register(&xicap_pdev);
}
return retval;
}
device_initcall(xicap_devinit);
#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
static struct resource wdt_rsrc[] = {
RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
};
static struct platform_device wdt_pdev = {
.name = WDT_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(wdt_rsrc),
.resource = wdt_rsrc
};
/*
* Create a platform device for the GPI port that receives the
* image data from the embedded camera.
*/
static int __init wdt_devinit(void)
{
adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
return platform_device_register(&wdt_pdev);
}
device_initcall(wdt_devinit);
#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
static struct resource excite_nandflash_rsrc[] = {
RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
};
static struct platform_device excite_nandflash_pdev = {
.name = "excite_nand",
.id = NAND_UNIT,
.num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
.resource = excite_nandflash_rsrc
};
/*
* Create a platform device for the access to the nand-flash
* port
*/
static int __init excite_nandflash_devinit(void)
{
adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
/* nothing to be done here */
/* Register platform device */
return platform_device_register(&excite_nandflash_pdev);
}
device_initcall(excite_nandflash_devinit);
static struct resource iodev_rsrc[] = {
RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
};
static struct platform_device io_pdev = {
.name = IODEV_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(iodev_rsrc),
.resource = iodev_rsrc
};
/*
* Create a platform device for the external I/O ports.
*/
static int __init io_devinit(void)
{
adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
return platform_device_register(&io_pdev);
}
device_initcall(io_devinit);
#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
static struct resource rm9k_ge_rsrc[] = {
RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
};
static struct platform_device rm9k_ge_pdev = {
.name = RM9K_GE_NAME,
.id = RM9K_GE_UNIT,
.num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
.resource = rm9k_ge_rsrc
};
/*
* Create a platform device for the Ethernet port.
*/
static int __init rm9k_ge_devinit(void)
{
u32 reg;
adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
/* Power up the slice and configure it. */
reg = titan_readl(CPTC1R);
reg &= ~(0x11000 << slice_eth);
reg |= 0x100 << slice_eth;
titan_writel(reg, CPTC1R);
/* Take the MAC out of reset, reset the DLLs. */
reg = titan_readl(CPRR);
reg &= ~(0x00030000 << (slice_eth * 2));
reg |= 0x3 << (slice_eth * 2);
titan_writel(reg, CPRR);
return platform_device_register(&rm9k_ge_pdev);
}
device_initcall(rm9k_ge_devinit);
#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
static int __init excite_setup_devs(void)
{
int res;
u32 reg;
/* Enable xdma and fifo interrupts */
reg = titan_readl(0x0050);
titan_writel(reg | 0x18000000, 0x0050);
res = request_resource(&iomem_resource, &excite_titan_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_scram_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_fpga_resource);
if (res)
return res;
res = request_resource(&iomem_resource, &excite_nand_resource);
if (res)
return res;
excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
( IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA);
excite_nand_resource.flags = excite_nand_resource.parent->flags &
( IORESOURCE_IO | IORESOURCE_MEM
| IORESOURCE_IRQ | IORESOURCE_DMA);
return 0;
}
arch_initcall(excite_setup_devs);
arch/mips/basler/excite/excite_iodev.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2005 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/smp_lock.h>
#include "excite_iodev.h"
static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
static int __init iodev_probe(struct platform_device *);
static int __devexit iodev_remove(struct platform_device *);
static int iodev_open(struct inode *, struct file *);
static int iodev_release(struct inode *, struct file *);
static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
static irqreturn_t iodev_irqhdl(int, void *);
static const char iodev_name[] = "iodev";
static unsigned int iodev_irq;
static DECLARE_WAIT_QUEUE_HEAD(wq);
static const struct file_operations fops =
{
.owner = THIS_MODULE,
.open = iodev_open,
.release = iodev_release,
.read = iodev_read,
.poll = iodev_poll
};
static struct miscdevice miscdev =
{
.minor = MISC_DYNAMIC_MINOR,
.name = iodev_name,
.fops = &fops
};
static struct platform_driver iodev_driver = {
.driver = {
.name = iodev_name,
.owner = THIS_MODULE,
},
.probe = iodev_probe,
.remove = __devexit_p(iodev_remove),
};
static const struct resource *
iodev_get_resource(struct platform_device *pdv, const char *name,
unsigned int type)
{
char buf[80];
if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
return NULL;
return platform_get_resource_byname(pdv, type, buf);
}
/* No hotplugging on the platform bus - use __init */
static int __init iodev_probe(struct platform_device *dev)
{
const struct resource * const ri =
iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
if (unlikely(!ri))
return -ENXIO;
iodev_irq = ri->start;
return misc_register(&miscdev);
}
static int __devexit iodev_remove(struct platform_device *dev)
{
return misc_deregister(&miscdev);
}
static int iodev_open(struct inode *i, struct file *f)
{
int ret;
ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
iodev_name, &miscdev);
return ret;
}
static int iodev_release(struct inode *i, struct file *f)
{
free_irq(iodev_irq, &miscdev);
return 0;
}
static ssize_t
iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
{
ssize_t ret;
DEFINE_WAIT(w);
prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
if (!signal_pending(current))
schedule();
ret = signal_pending(current) ? -ERESTARTSYS : 0;
finish_wait(&wq, &w);
return ret;
}
static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
{
poll_wait(f, &wq, p);
return POLLOUT | POLLWRNORM;
}
static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
{
wake_up(&wq);
return IRQ_HANDLED;
}
static int __init iodev_init_module(void)
{
return platform_driver_register(&iodev_driver);
}
static void __exit iodev_cleanup_module(void)
{
platform_driver_unregister(&iodev_driver);
}
module_init(iodev_init_module);
module_exit(iodev_cleanup_module);
MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
MODULE_VERSION("0.0");
MODULE_LICENSE("GPL");
arch/mips/basler/excite/excite_iodev.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef __EXCITE_IODEV_H__
#define __EXCITE_IODEV_H__
/* Device name */
#define IODEV_NAME "iodev"
/* Resource names */
#define IODEV_RESOURCE_IRQ "excite_iodev_irq"
#endif /* __EXCITE_IODEV_H__ */
arch/mips/basler/excite/excite_irq.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslereb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
extern asmlinkage void excite_handle_int(void);
/*
* Initialize the interrupt handler
*/
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
}
asmlinkage void plat_irq_dispatch(void)
{
const u32
interrupts = read_c0_cause() >> 8,
mask = ((read_c0_status() >> 8) & 0x000000ff) |
(read_c0_intcontrol() & 0x0000ff00),
pending = interrupts & mask;
u32 msgintflags, msgintmask, msgint;
/* process timer interrupt */
if (pending & (1 << TIMER_IRQ)) {
do_IRQ(TIMER_IRQ);
return;
}
/* Process PCI interrupts */
#if USB_IRQ < 10
msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
if ((pending & (1 << USB_IRQ)) && msgint) {
#else
if (pending & (1 << USB_IRQ)) {
#endif
do_IRQ(USB_IRQ);
return;
}
/* Process TITAN interrupts */
msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
if ((pending & (1 << TITAN_IRQ)) && msgint) {
ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
do_IRQ(TITAN_IRQ);
return;
}
/* Process FPGA line #0 interrupts */
msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
if ((pending & (1 << FPGA0_IRQ)) && msgint) {
do_IRQ(FPGA0_IRQ);
return;
}
/* Process FPGA line #1 interrupts */
msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
if ((pending & (1 << FPGA1_IRQ)) && msgint) {
do_IRQ(FPGA1_IRQ);
return;
}
/* Process PHY interrupts */
msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
if ((pending & (1 << PHY_IRQ)) && msgint) {
do_IRQ(PHY_IRQ);
return;
}
/* Process spurious interrupts */
spurious_interrupt();
}
arch/mips/basler/excite/excite_procfs.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004, 2005 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* Procfs support for Basler eXcite
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/stat.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
static int excite_unit_id_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%06x", unit_id);
return 0;
}
static int excite_unit_id_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, excite_unit_id_proc_show, NULL);
}
static const struct file_operations excite_unit_id_proc_fops = {
.owner = THIS_MODULE,
.open = excite_unit_id_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int
excite_bootrom_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
void __iomem * src;
if (off >= EXCITE_SIZE_BOOTROM) {
*eof = 1;
return 0;
}
if ((off + count) > EXCITE_SIZE_BOOTROM)
count = EXCITE_SIZE_BOOTROM - off;
src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
if (src) {
memcpy_fromio(page, src, count);
iounmap(src);
*start = page;
} else {
count = -ENOMEM;
}
return count;
}
void excite_procfs_init(void)
{
/* Create & populate /proc/excite */
struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL);
if (pdir) {
struct proc_dir_entry * e;
e = proc_create("unit_id", S_IRUGO, pdir,
&excite_unit_id_proc_fops);
if (e) e->size = 6;
e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
excite_bootrom_read, NULL);
if (e) e->size = EXCITE_SIZE_BOOTROM;
}
}
arch/mips/basler/excite/excite_prom.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
* Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
* Manish Lachwani.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/bootinfo.h>
#include <asm/string.h>
#include <excite.h>
/* This struct is used by Redboot to pass arguments to the kernel */
typedef struct
{
char *name;
char *val;
} t_env_var;
struct parmblock {
t_env_var memsize;
t_env_var modetty0;
t_env_var ethaddr;
t_env_var env_end;
char *argv[2];
char text[0];
};
static unsigned int prom_argc;
static const char ** prom_argv;
static const t_env_var * prom_env;
static void prom_halt(void) __attribute__((noreturn));
static void prom_exit(void) __attribute__((noreturn));
const char *get_system_type(void)
{
return "Basler eXcite";
}
/*
* Halt the system
*/
static void prom_halt(void)
{
printk(KERN_NOTICE "\n** System halted.\n");
while (1)
asm volatile (
"\t.set\tmips3\n"
"\twait\n"
"\t.set\tmips0\n"
);
}
/*
* Reset the CPU and re-enter Redboot
*/
static void prom_exit(void)
{
unsigned int i;
volatile unsigned char * const flg =
(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
/* Clear the watchdog reset flag, set the reboot flag */
*flg &= ~0x01;
*flg |= 0x80;
for (i = 0; i < 10; i++) {
*(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
iob();
mdelay(1000);
}
printk(KERN_NOTICE "Reset failed\n");
prom_halt();
}
static const char __init *prom_getenv(char *name)
{
const t_env_var * p;
for (p = prom_env; p->name != NULL; p++)
if(strcmp(name, p->name) == 0)
break;
return p->val;
}
/*
* Init routine which accepts the variables from Redboot
*/
void __init prom_init(void)
{
const struct parmblock * const pb = (struct parmblock *) fw_arg2;
prom_argc = fw_arg0;
prom_argv = (const char **) fw_arg1;
prom_env = &pb->memsize;
/* Callbacks for halt, restart */
_machine_restart = (void (*)(char *)) prom_exit;
_machine_halt = prom_halt;
#ifdef CONFIG_32BIT
/* copy command line */
strcpy(arcs_cmdline, prom_argv[1]);
memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
strcpy(modetty, prom_getenv("modetty0"));
#endif /* CONFIG_32BIT */
#ifdef CONFIG_64BIT
# error 64 bit support not implemented
#endif /* CONFIG_64BIT */
}
/* This is called from free_initmem(), so we need to provide it */
void __init prom_free_prom_memory(void)
{
/* Nothing to do */
}
arch/mips/basler/excite/excite_setup.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004, 2005 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
* Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
* Manish Lachwani.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <asm/bootinfo.h>
#include <asm/mipsregs.h>
#include <asm/pgtable-32.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
#define TITAN_UART_CLK 25000000
#if 1
/* normal serial port assignment */
#define REGBASE_SER0 0x0208
#define REGBASE_SER1 0x0238
#define MASK_SER0 0x1
#define MASK_SER1 0x2
#else
/* serial ports swapped */
#define REGBASE_SER0 0x0238
#define REGBASE_SER1 0x0208
#define MASK_SER0 0x2
#define MASK_SER1 0x1
#endif
unsigned long memsize;
char modetty[30];
unsigned int titan_irq = TITAN_IRQ;
static void __iomem * ctl_regs;
u32 unit_id;
volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
/* Protect access to shared GPI registers */
DEFINE_SPINLOCK(titan_lock);
int titan_irqflags;
/*
* The eXcite platform uses the alternate timer interrupt
*
* Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
* to handle the alternate timer interrupt of the RM9000.
*/
void __init plat_time_init(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
if (div == 33)
div = 1;
mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
}
static int __init excite_init_console(void)
{
#if defined(CONFIG_SERIAL_8250)
static __initdata char serr[] =
KERN_ERR "Serial port #%u setup failed\n";
struct uart_port up;
/* Take the DUART out of reset */
titan_writel(0x00ff1cff, CPRR);
#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
/* Enable both ports */
titan_writel(MASK_SER0 | MASK_SER1, UACFG);
#else
/* Enable port #0 only */
titan_writel(MASK_SER0, UACFG);
#endif
/*
* Set up serial port #0. Do not use autodetection; the result is
* not what we want.
*/
memset(&up, 0, sizeof(up));
up.membase = (char *) titan_addr(REGBASE_SER0);
up.irq = TITAN_IRQ;
up.uartclk = TITAN_UART_CLK;
up.regshift = 0;
up.iotype = UPIO_RM9000;
up.type = PORT_RM9000;
up.flags = UPF_SHARE_IRQ;
up.line = 0;
if (early_serial_setup(&up))
printk(serr, up.line);
#if CONFIG_SERIAL_8250_NR_UARTS > 1
/* And now for port #1. */
up.membase = (char *) titan_addr(REGBASE_SER1);
up.line = 1;
if (early_serial_setup(&up))
printk(serr, up.line);
#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
#else
/* Leave the DUART in reset */
titan_writel(0x00ff3cff, CPRR);
#endif /* defined(CONFIG_SERIAL_8250) */
return 0;
}
static int __init excite_platform_init(void)
{
unsigned int i;
unsigned char buf[3];
u8 reg;
void __iomem * dpr;
/* BIU buffer allocations */
ocd_writel(8, CPURSLMT); /* CPU */
titan_writel(4, CPGRWL); /* GPI / Ethernet */
/* Map control registers located in FPGA */
ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
if (!ctl_regs)
panic("eXcite: failed to map platform control registers\n");
memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
/* Clear the reboot flag */
dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
reg = __raw_readb(dpr);
__raw_writeb(reg & 0x7f, dpr);
iounmap(dpr);
/* Interrupt controller setup */
for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
ocd_writel(0x00000000, i + 0x04);
ocd_writel(0xffffffff, i + 0x0c);
}
ocd_writel(0x2, NMICONFIG);
ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
| ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
| ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
ocd_writel((0x1 << (PHY_MSGINT % 0x20))
| ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
#if USB_IRQ < 10
ocd_writel((0x1 << (USB_MSGINT % 0x20))
| ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
#endif
/* Enable the packet FIFO, XDMA and XDMA arbiter */
titan_writel(0x00ff18ff, CPRR);
/*
* Set up the PADMUX. Power down all ethernet slices,
* they will be powered up and configured at device startup.
*/
titan_writel(0x00878206, CPTC1R);
titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
/* Reset and enable the FIFO block */
titan_writel(0x00000001, SDRXFCIE);
titan_writel(0x00000001, SDTXFCIE);
titan_writel(0x00000100, SDRXFCIE);
titan_writel(0x00000000, SDTXFCIE);
/*
* Initialize the common interrupt shared by all components of
* the GPI/Ethernet subsystem.
*/
titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
titan_writel(TITAN_MSGINT, CPCFG1);
/*
* XDMA configuration.
* In order for the XDMA to be sharable among multiple drivers,
* the setup must be done here in the platform. The reason is that
* this setup can only be done while the XDMA is in reset. If this
* were done in a driver, it would interrupt all other drivers
* using the XDMA.
*/
titan_writel(0x80021dff, GXCFG); /* XDMA reset */
titan_writel(0x00000000, CPXCISRA);
titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
#if defined(CONFIG_HIGHMEM)
# error change for HIGHMEM support!
#else
titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
#endif
titan_writel(0, GXDMA_DESCADR);
for (i = 0x5040; i <= 0x5300; i += 0x0040)
titan_writel(0x80080000, i); /* reset channel */
titan_writel((0x1 << 29) /* no sparse tx descr. */
| (0x1 << 28) /* no sparse rx descr. */
| (0x1 << 23) | (0x1 << 24) /* descriptor coherency */
| (0x1 << 21) | (0x1 << 22) /* data coherency */
| (0x1 << 17)
| 0x1dff,
GXCFG);
#if defined(CONFIG_SMP)
# error No SMP support
#else
/* All interrupts go to core #0 only. */
titan_writel(0x1f007fff, CPDST0A);
titan_writel(0x00000000, CPDST0B);
titan_writel(0x0000ff3f, CPDST1A);
titan_writel(0x00000000, CPDST1B);
titan_writel(0x00ffffff, CPXDSTA);
titan_writel(0x00000000, CPXDSTB);
#endif
/* Enable DUART interrupts, disable everything else. */
titan_writel(0x04000000, CPGIG0ER);
titan_writel(0x000000c0, CPGIG1ER);
excite_procfs_init();
return 0;
}
void __init plat_mem_setup(void)
{
volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
/* Announce RAM to system */
add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
/* Set up the peripheral address map */
*(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
*(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
*(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
*(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
wmb();
*(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
wmb();
ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
/* Local bus slot #0 */
ocd_writel(0x00040510, LDP0);
ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
/* Local bus slot #2 */
ocd_writel(0x00000330, LDP2);
ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
/* Local bus slot #3 */
ocd_writel(0x00123413, LDP3);
ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
}
console_initcall(excite_init_console);
arch_initcall(excite_platform_init);
EXPORT_SYMBOL(titan_lock);
EXPORT_SYMBOL(titan_irqflags);
EXPORT_SYMBOL(titan_irq);
EXPORT_SYMBOL(ocd_base);
EXPORT_SYMBOL(titan_base);
arch/mips/configs/ar7_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
CONFIG_AR7=y CONFIG_AR7=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/bcm47xx_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
CONFIG_BCM47XX=y CONFIG_BCM47XX=y
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/bcm63xx_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y CONFIG_BCM63XX=y
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
......
arch/mips/configs/bigsur_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/capcella_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/cavium-octeon_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/cobalt_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
CONFIG_MIPS_COBALT=y CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/db1000_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/db1100_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/db1200_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y ...@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
CONFIG_MIPS_DB1200=y CONFIG_MIPS_DB1200=y
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/db1500_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/db1550_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y ...@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
CONFIG_MIPS_DB1550=y CONFIG_MIPS_DB1550=y
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/decstation_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y CONFIG_MACH_DECSTATION=y
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/e55_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/excite_defconfig 已删除 100644 → 0
浏览文件 @ c3d8d850
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Tue Feb 20 21:47:31 2007
#
CONFIG_MIPS=y
#
# Machine selection
#
CONFIG_ZONE_DMA=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
CONFIG_BASLER_EXCITE=y
# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_DMA_COHERENT=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_CPU_RM9K=y
CONFIG_MIPS_RM9122=y
CONFIG_SERIAL_RM9000=y
CONFIG_GPI_RM9000=y
CONFIG_WDT_RM9000=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_RM9000=y
CONFIG_WEAK_ORDERING=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_BASLER_EXCITE is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_WDT_RM9K_GPI=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
arch/mips/configs/fuloong2e_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set # CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set # CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
......
arch/mips/configs/ip22_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/ip27_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/ip28_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/ip32_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/jazz_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
CONFIG_MACH_JAZZ=y CONFIG_MACH_JAZZ=y
......
arch/mips/configs/jmr3927_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/lasat_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/lemote2f_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set # CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set # CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
......
arch/mips/configs/malta_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
CONFIG_ZONE_DMA=y CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/markeins_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/mipssim_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/mpc30x_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/msp71xx_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/mtx1_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
CONFIG_MACH_ALCHEMY=y CONFIG_MACH_ALCHEMY=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/pb1100_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/pb1500_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/pb1550_defconfig
浏览文件 @ de4148f3
...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y ...@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/pnx8335-stb225_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/pnx8550-jbs_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/pnx8550-stb810_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/powertv_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set # CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/rb532_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/rbtx49xx_defconfig
浏览文件 @ de4148f3
...@@ -10,7 +10,6 @@ CONFIG_MIPS=y ...@@ -10,7 +10,6 @@ CONFIG_MIPS=y
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set # CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set # CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
......
arch/mips/configs/rm200_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/sb1250-swarm_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/tb0219_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/tb0226_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/tb0287_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set # CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
......
arch/mips/configs/workpad_defconfig
浏览文件 @ de4148f3
...@@ -9,7 +9,6 @@ CONFIG_MIPS=y ...@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection # Machine selection
# #
# CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/wrppmc_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/configs/yosemite_defconfig
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y ...@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set # CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set # CONFIG_MACH_JAZZ is not set
......
arch/mips/include/asm/mach-excite/cpu-feature-overrides.h 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
/*
* Basler eXcite has an RM9122 processor.
*/
#define cpu_has_watch 1
#define cpu_has_mips16 0
#define cpu_has_divec 0
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_prefetch 1
#define cpu_has_mcheck 0
#define cpu_has_ejtag 0
#define cpu_has_llsc 1
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_mipsmt 0
#define cpu_has_userlocal 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_inclusive_pcaches 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
arch/mips/include/asm/mach-excite/excite.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef __EXCITE_H__
#define __EXCITE_H__
#include <linux/init.h>
#include <asm/addrspace.h>
#include <asm/types.h>
#define EXCITE_CPU_EXT_CLOCK 100000000
#if !defined(__ASSEMBLY__)
void __init excite_kgdb_init(void);
void excite_procfs_init(void);
extern unsigned long memsize;
extern char modetty[];
extern u32 unit_id;
#endif
/* Base name for XICAP devices */
#define XICAP_NAME "xicap_gpi"
/* OCD register offsets */
#define LKB0 0x0038
#define LKB5 0x0128
#define LKM5 0x012C
#define LKB7 0x0138
#define LKM7 0x013c
#define LKB8 0x0140
#define LKM8 0x0144
#define LKB9 0x0148
#define LKM9 0x014c
#define LKB10 0x0150
#define LKM10 0x0154
#define LKB11 0x0158
#define LKM11 0x015c
#define LKB12 0x0160
#define LKM12 0x0164
#define LKB13 0x0168
#define LKM13 0x016c
#define LDP0 0x0200
#define LDP1 0x0210
#define LDP2 0x0220
#define LDP3 0x0230
#define INTPIN0 0x0A40
#define INTPIN1 0x0A44
#define INTPIN2 0x0A48
#define INTPIN3 0x0A4C
#define INTPIN4 0x0A50
#define INTPIN5 0x0A54
#define INTPIN6 0x0A58
#define INTPIN7 0x0A5C
/* TITAN register offsets */
#define CPRR 0x0004
#define CPDSR 0x0008
#define CPTC0R 0x000c
#define CPTC1R 0x0010
#define CPCFG0 0x0020
#define CPCFG1 0x0024
#define CPDST0A 0x0028
#define CPDST0B 0x002c
#define CPDST1A 0x0030
#define CPDST1B 0x0034
#define CPXDSTA 0x0038
#define CPXDSTB 0x003c
#define CPXCISRA 0x0048
#define CPXCISRB 0x004c
#define CPGIG0ER 0x0050
#define CPGIG1ER 0x0054
#define CPGRWL 0x0068
#define CPURSLMT 0x00f8
#define UACFG 0x0200
#define UAINTS 0x0204
#define SDRXFCIE 0x4828
#define SDTXFCIE 0x4928
#define INTP0Status0 0x1B00
#define INTP0Mask0 0x1B04
#define INTP0Set0 0x1B08
#define INTP0Clear0 0x1B0C
#define GXCFG 0x5000
#define GXDMADRPFX 0x5018
#define GXDMA_DESCADR 0x501c
#define GXCH0TDESSTRT 0x5054
/* IRQ definitions */
#define NMICONFIG 0xac0
#define TITAN_MSGINT 0xc4
#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2)
#define FPGA0_MSGINT 0x5a
#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2)
#define FPGA1_MSGINT 0x7b
#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2)
#define PHY_MSGINT 0x9c
#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2)
#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
/* Pre-release units used interrupt pin #9 */
#define USB_IRQ 11
#else
/* Re-designed units use interrupt pin #1 */
#define USB_MSGINT 0x39
#define USB_IRQ ((USB_MSGINT / 0x20) + 2)
#endif
#define TIMER_IRQ 12
/* Device address ranges */
#define EXCITE_OFFS_OCD 0x1fffc000
#define EXCITE_SIZE_OCD (16 * 1024)
#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD)
#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD)
#define EXCITE_OFFS_SCRAM 0x1fffa000
#define EXCITE_SIZE_SCRAM (8 << 10)
#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM)
#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM)
#define EXCITE_OFFS_PCI_IO 0x1fff8000
#define EXCITE_SIZE_PCI_IO (8 << 10)
#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO)
#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
#define EXCITE_OFFS_TITAN 0x1fff0000
#define EXCITE_SIZE_TITAN (32 << 10)
#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN)
#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN)
#define EXCITE_OFFS_PCI_MEM 0x1ffe0000
#define EXCITE_SIZE_PCI_MEM (64 << 10)
#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM)
#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
#define EXCITE_OFFS_FPGA 0x1ffdc000
#define EXCITE_SIZE_FPGA (16 << 10)
#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA)
#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA)
#define EXCITE_OFFS_NAND 0x1ffd8000
#define EXCITE_SIZE_NAND (16 << 10)
#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND)
#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND)
#define EXCITE_OFFS_BOOTROM 0x1f000000
#define EXCITE_SIZE_BOOTROM (8 << 20)
#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM)
#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
/* FPGA address offsets */
#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */
#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */
#endif /* __EXCITE_H__ */
arch/mips/include/asm/mach-excite/excite_fpga.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef EXCITE_FPGA_H_INCLUDED
#define EXCITE_FPGA_H_INCLUDED
/**
* Address alignment of the individual FPGA bytes.
* The address arrangement of the individual bytes of the FPGA is two
* byte aligned at the embedded MK2 platform.
*/
#ifdef EXCITE_CCI_FPGA_MK2
typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
#else
typedef unsigned char excite_cci_fpga_align_t;
#endif
/**
* Size of Dual Ported RAM.
*/
#define EXCITE_DPR_SIZE 263
/**
* Size of Reserved Status Fields in Dual Ported RAM.
*/
#define EXCITE_DPR_STATUS_SIZE 7
/**
* FPGA.
* Hardware register layout of the FPGA interface. The FPGA must accessed
* byte wise solely.
* @see EXCITE_CCI_DPR_MK2
*/
typedef struct excite_fpga {
/**
* Dual Ported RAM.
*/
excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
/**
* Status.
*/
excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
#ifdef EXCITE_CCI_FPGA_MK2
/**
* RM9000 Interrupt.
* Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
*/
excite_cci_fpga_align_t rm9k_int;
#else
/**
* MK2 Interrupt.
* Write access initiates interrupt at the ARM processor of the MK2.
*/
excite_cci_fpga_align_t mk2_int;
excite_cci_fpga_align_t gap[0x1000-0x10f];
/**
* IRQ Source/Acknowledge.
*/
excite_cci_fpga_align_t rm9k_irq_src;
/**
* IRQ Mask.
* Set bits enable the related interrupt.
*/
excite_cci_fpga_align_t rm9k_irq_mask;
#endif
} excite_fpga;
#endif /* ndef EXCITE_FPGA_H_INCLUDED */
arch/mips/include/asm/mach-excite/excite_nandflash.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef __EXCITE_NANDFLASH_H__
#define __EXCITE_NANDFLASH_H__
/* Resource names */
#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs"
#endif /* __EXCITE_NANDFLASH_H__ */
arch/mips/include/asm/mach-excite/rm9k_eth.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#if !defined(__RM9K_ETH_H__)
#define __RM9K_ETH_H__
#define RM9K_GE_NAME "rm9k_ge"
/* Resource names */
#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac"
#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat"
#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc"
#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma"
#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx"
#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx"
#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx"
#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx"
#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy"
#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx"
#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx"
#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main"
#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy"
#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice"
#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel"
#endif /* !defined(__RM9K_ETH_H__) */
arch/mips/include/asm/mach-excite/rm9k_wdt.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef __RM9K_WDT_H__
#define __RM9K_WDT_H__
/* Device name */
#define WDT_NAME "wdt_gpi"
/* Resource names */
#define WDT_RESOURCE_REGS "excite_watchdog_regs"
#define WDT_RESOURCE_IRQ "excite_watchdog_irq"
#define WDT_RESOURCE_COUNTER "excite_watchdog_counter"
#endif /* __RM9K_WDT_H__ */
arch/mips/include/asm/mach-excite/rm9k_xicap.h 已删除 100644 → 0
浏览文件 @ c3d8d850
#ifndef __EXCITE_XICAP_H__
#define __EXCITE_XICAP_H__
/* Resource names */
#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx"
#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx"
#define XICAP_RESOURCE_XDMA "xicap_xdma"
#define XICAP_RESOURCE_DMADESC "xicap_dmadesc"
#define XICAP_RESOURCE_PKTPROC "xicap_pktproc"
#define XICAP_RESOURCE_IRQ "xicap_irq"
#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice"
#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks"
#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream"
#endif /* __EXCITE_XICAP_H__ */
arch/mips/include/asm/mach-excite/war.h 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
#define __ASM_MIPS_MACH_EXCITE_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 1
#define ICACHE_REFILLS_WORKAROUND_WAR 1
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
arch/mips/pci/Makefile
浏览文件 @ de4148f3
...@@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ ...@@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
# #
# These are still pretty much in the old state, watch, go blind. # These are still pretty much in the old state, watch, go blind.
# #
obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o
obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
......
arch/mips/pci/fixup-excite.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <excite.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (pin == 0)
return -1;
return USB_IRQ; /* USB controller is the only PCI device */
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/pci-excite.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2004 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
* Based on the PMC-Sierra Yosemite board support by Ralf Baechle.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/bitops.h>
#include <asm/rm9k-ocd.h>
#include <excite.h>
extern struct pci_ops titan_pci_ops;
static struct resource
mem_resource = {
.name = "PCI memory",
.start = EXCITE_PHYS_PCI_MEM,
.end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1,
.flags = IORESOURCE_MEM
},
io_resource = {
.name = "PCI I/O",
.start = EXCITE_PHYS_PCI_IO,
.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1,
.flags = IORESOURCE_IO
};
static struct pci_controller bx_controller = {
.pci_ops = &titan_pci_ops,
.mem_resource = &mem_resource,
.mem_offset = 0x00000000UL,
.io_resource = &io_resource,
.io_offset = 0x00000000UL
};
static char
iopage_failed[] __initdata = "Cannot allocate PCI I/O page",
modebits_no_pci[] __initdata = "PCI is not configured in mode bits";
#define RM9000x2_OCD_HTSC 0x0604
#define RM9000x2_OCD_HTBHL 0x060c
#define RM9000x2_OCD_PCIHRST 0x078c
#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */
#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */
#define PCISC_FB2B 0x00000200
#define PCISC_MWICG 0x00000010
#define PCISC_EMC 0x00000004
#define PCISC_ERMA 0x00000002
static int __init basler_excite_pci_setup(void)
{
const unsigned int fullbars = memsize / (256 << 20);
unsigned int i;
/* Check modebits to see if PCI is really enabled. */
if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1))
panic(modebits_no_pci);
if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO,
"Memory-mapped PCI I/O page"))
panic(iopage_failed);
/* Enable PCI 0 as master for config cycles */
ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC);
/* Set up latency timer */
ocd_writel(0x8008, RM9000x2_OCD_HTBHL);
/* Setup host IO and Memory space */
ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7);
ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7);
ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8);
ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8);
/* Set up PCI BARs to map all installed memory */
for (i = 0; i < 6; i++) {
const unsigned int bar = 0x610 + i * 4;
if (i < fullbars) {
ocd_writel(0x10000000 * i, bar);
ocd_writel(0x01000000 * i, bar + 0x140);
ocd_writel(0x0ffff029, bar + 0x100);
continue;
}
if (i == fullbars) {
int o;
u32 mask;
const unsigned long rem = memsize - i * 0x10000000;
if (!rem) {
ocd_writel(0x00000000, bar + 0x100);
continue;
}
o = ffs(rem) - 1;
if (rem & ~(0x1 << o))
o++;
mask = ((0x1 << o) & 0x0ffff000) - 0x1000;
ocd_writel(0x10000000 * i, bar);
ocd_writel(0x01000000 * i, bar + 0x140);
ocd_writel(0x00000029 | mask, bar + 0x100);
continue;
}
ocd_writel(0x00000000, bar + 0x100);
}
/* Finally, enable the PCI interrupt */
#if USB_IRQ > 7
set_c0_intcontrol(1 << USB_IRQ);
#else
set_c0_status(1 << (USB_IRQ + 8));
#endif
ioport_resource.start = EXCITE_PHYS_PCI_IO;
ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1;
set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO));
register_pci_controller(&bx_controller);
return 0;
}
arch_initcall(basler_excite_pci_setup);
drivers/mtd/nand/Kconfig
浏览文件 @ de4148f3
...@@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL ...@@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on ARCH_PXA depends on ARCH_PXA
config MTD_NAND_BASLER_EXCITE
tristate "Support for NAND Flash on Basler eXcite"
depends on BASLER_EXCITE
help
This enables the driver for the NAND flash device found on the
Basler eXcite Smart Camera. If built as a module, the driver
will be named excite_nandflash.
config MTD_NAND_CAFE config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip" tristate "NAND support for OLPC CAFÉ chip"
depends on PCI depends on PCI
......
drivers/mtd/nand/Makefile
浏览文件 @ de4148f3
...@@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o ...@@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
......
drivers/mtd/nand/excite_nandflash.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
* Original code by Thies Moeller <thies.moeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/rm9k-ocd.h>
#include <excite_nandflash.h>
#define EXCITE_NANDFLASH_VERSION "0.1"
/* I/O register offsets */
#define EXCITE_NANDFLASH_DATA_BYTE 0x00
#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
#define EXCITE_NANDFLASH_ADDR_BYTE 0x10
#define EXCITE_NANDFLASH_CMD_BYTE 0x14
/* prefix for debug output */
static const char module_id[] = "excite_nandflash";
/*
* partition definition
*/
static const struct mtd_partition partition_info[] = {
{
.name = "eXcite RootFS",
.offset = 0,
.size = MTDPART_SIZ_FULL
}
};
static inline const struct resource *
excite_nand_get_resource(struct platform_device *d, unsigned long flags,
const char *basename)
{
char buf[80];
if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
return NULL;
return platform_get_resource_byname(d, flags, buf);
}
static inline void __iomem *
excite_nand_map_regs(struct platform_device *d, const char *basename)
{
void *result = NULL;
const struct resource *const r =
excite_nand_get_resource(d, IORESOURCE_MEM, basename);
if (r)
result = ioremap_nocache(r->start, r->end + 1 - r->start);
return result;
}
/* controller and mtd information */
struct excite_nand_drvdata {
struct mtd_info board_mtd;
struct nand_chip board_chip;
void __iomem *regs;
void __iomem *tgt;
};
/* Control function */
static void excite_nand_control(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct excite_nand_drvdata * const d =
container_of(mtd, struct excite_nand_drvdata, board_mtd);
switch (ctrl) {
case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
break;
case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
break;
case NAND_CTRL_CHANGE | NAND_NCE:
d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
break;
}
if (cmd != NAND_CMD_NONE)
__raw_writeb(cmd, d->tgt);
}
/* Return 0 if flash is busy, 1 if ready */
static int excite_nand_devready(struct mtd_info *mtd)
{
struct excite_nand_drvdata * const drvdata =
container_of(mtd, struct excite_nand_drvdata, board_mtd);
return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
}
/*
* Called by device layer to remove the driver.
* The binding to the mtd and all allocated
* resources are released.
*/
static int __devexit excite_nand_remove(struct platform_device *dev)
{
struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
if (unlikely(!this)) {
printk(KERN_ERR "%s: called %s without private data!!",
module_id, __func__);
return -EINVAL;
}
/* first thing we need to do is release our mtd
* then go through freeing the resource used
*/
nand_release(&this->board_mtd);
/* free the common resources */
iounmap(this->regs);
kfree(this);
DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
return 0;
}
/*
* Called by device layer when it finds a device matching
* one our driver can handle. This code checks to see if
* it can allocate all necessary resources then calls the
* nand layer to look for devices.
*/
static int __init excite_nand_probe(struct platform_device *pdev)
{
struct excite_nand_drvdata *drvdata; /* private driver data */
struct nand_chip *board_chip; /* private flash chip data */
struct mtd_info *board_mtd; /* mtd info for this board */
int scan_res;
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (unlikely(!drvdata)) {
printk(KERN_ERR "%s: no memory for drvdata\n",
module_id);
return -ENOMEM;
}
/* bind private data into driver */
platform_set_drvdata(pdev, drvdata);
/* allocate and map the resource */
drvdata->regs =
excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
if (unlikely(!drvdata->regs)) {
printk(KERN_ERR "%s: cannot reserve register region\n",
module_id);
kfree(drvdata);
return -ENXIO;
}
drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
/* initialise our chip */
board_chip = &drvdata->board_chip;
board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
board_chip->cmd_ctrl = excite_nand_control;
board_chip->dev_ready = excite_nand_devready;
board_chip->chip_delay = 25;
board_chip->ecc.mode = NAND_ECC_SOFT;
/* link chip to mtd */
board_mtd = &drvdata->board_mtd;
board_mtd->priv = board_chip;
DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
scan_res = nand_scan(&drvdata->board_mtd, 1);
if (likely(!scan_res)) {
DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
add_mtd_partitions(&drvdata->board_mtd, partition_info,
ARRAY_SIZE(partition_info));
} else {
iounmap(drvdata->regs);
kfree(drvdata);
printk(KERN_ERR "%s: device scan failed\n", module_id);
return -EIO;
}
return 0;
}
static struct platform_driver excite_nand_driver = {
.driver = {
.name = "excite_nand",
.owner = THIS_MODULE,
},
.probe = excite_nand_probe,
.remove = __devexit_p(excite_nand_remove)
};
static int __init excite_nand_init(void)
{
pr_info("Basler eXcite nand flash driver Version "
EXCITE_NANDFLASH_VERSION "\n");
return platform_driver_register(&excite_nand_driver);
}
static void __exit excite_nand_exit(void)
{
platform_driver_unregister(&excite_nand_driver);
}
module_init(excite_nand_init);
module_exit(excite_nand_exit);
MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
drivers/watchdog/Kconfig
浏览文件 @ de4148f3
...@@ -815,16 +815,6 @@ config PNX833X_WDT ...@@ -815,16 +815,6 @@ config PNX833X_WDT
timer has expired and no process has written to /dev/watchdog during timer has expired and no process has written to /dev/watchdog during
that time. that time.
config WDT_RM9K_GPI
tristate "RM9000/GPI hardware watchdog"
depends on CPU_RM9000
help
Watchdog implementation using the GPI hardware found on
PMC-Sierra RM9xxx CPUs.
To compile this driver as a module, choose M here: the
module will be called rm9k_wdt.
config SIBYTE_WDOG config SIBYTE_WDOG
tristate "Sibyte SoC hardware watchdog" tristate "Sibyte SoC hardware watchdog"
depends on CPU_SB1 depends on CPU_SB1
......
drivers/watchdog/Makefile
浏览文件 @ de4148f3
...@@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o ...@@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
......
drivers/watchdog/rm9k_wdt.c 已删除 100644 → 0
浏览文件 @ c3d8d850
/*
* Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx
* chips.
*
* Copyright (C) 2004 by Basler Vision Technologies AG
* Author: Thomas Koeller <thomas.koeller@baslerweb.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/notifier.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/atomic.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/rm9k-ocd.h>
#include <rm9k_wdt.h>
#define CLOCK 125000000
#define MAX_TIMEOUT_SECONDS 32
#define CPCCR 0x0080
#define CPGIG1SR 0x0044
#define CPGIG1ER 0x0054
/* Function prototypes */
static irqreturn_t wdt_gpi_irqhdl(int, void *);
static void wdt_gpi_start(void);
static void wdt_gpi_stop(void);
static void wdt_gpi_set_timeout(unsigned int);
static int wdt_gpi_open(struct inode *, struct file *);
static int wdt_gpi_release(struct inode *, struct file *);
static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
loff_t *);
static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
static const struct resource *wdt_gpi_get_resource(struct platform_device *,
const char *, unsigned int);
static int __init wdt_gpi_probe(struct platform_device *);
static int __exit wdt_gpi_remove(struct platform_device *);
static const char wdt_gpi_name[] = "wdt_gpi";
static atomic_t opencnt;
static int expect_close;
static int locked;
/* These are set from device resources */
static void __iomem *wd_regs;
static unsigned int wd_irq, wd_ctr;
/* Module arguments */
static int timeout = MAX_TIMEOUT_SECONDS;
module_param(timeout, int, 0444);
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
static unsigned long resetaddr = 0xbffdc200;
module_param(resetaddr, ulong, 0444);
MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset");
static unsigned long flagaddr = 0xbffdc104;
module_param(flagaddr, ulong, 0444);
MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to");
static int powercycle;
module_param(powercycle, bool, 0444);
MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0444);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
/* Kernel interfaces */
static const struct file_operations fops = {
.owner = THIS_MODULE,
.open = wdt_gpi_open,
.release = wdt_gpi_release,
.write = wdt_gpi_write,
.unlocked_ioctl = wdt_gpi_ioctl,
};
static struct miscdevice miscdev = {
.minor = WATCHDOG_MINOR,
.name = wdt_gpi_name,
.fops = &fops,
};
static struct notifier_block wdt_gpi_shutdown = {
.notifier_call = wdt_gpi_notify,
};
/* Interrupt handler */
static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
{
if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
return IRQ_NONE;
__raw_writel(0x1, wd_regs + 0x0008);
printk(KERN_CRIT "%s: watchdog expired - resetting system\n",
wdt_gpi_name);
*(volatile char *) flagaddr |= 0x01;
*(volatile char *) resetaddr = powercycle ? 0x01 : 0x2;
iob();
while (1)
cpu_relax();
}
/* Watchdog functions */
static void wdt_gpi_start(void)
{
u32 reg;
lock_titan_regs();
reg = titan_readl(CPGIG1ER);
titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER);
iob();
unlock_titan_regs();
}
static void wdt_gpi_stop(void)
{
u32 reg;
lock_titan_regs();
reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
titan_writel(reg, CPCCR);
reg = titan_readl(CPGIG1ER);
titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER);
iob();
unlock_titan_regs();
}
static void wdt_gpi_set_timeout(unsigned int to)
{
u32 reg;
const u32 wdval = (to * CLOCK) & ~0x0000000f;
lock_titan_regs();
reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
titan_writel(reg, CPCCR);
wmb();
__raw_writel(wdval, wd_regs + 0x0000);
wmb();
titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR);
wmb();
titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR);
iob();
unlock_titan_regs();
}
/* /dev/watchdog operations */
static int wdt_gpi_open(struct inode *inode, struct file *file)
{
int res;
if (unlikely(atomic_dec_if_positive(&opencnt) < 0))
return -EBUSY;
expect_close = 0;
if (locked) {
module_put(THIS_MODULE);
free_irq(wd_irq, &miscdev);
locked = 0;
}
res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED,
wdt_gpi_name, &miscdev);
if (unlikely(res))
return res;
wdt_gpi_set_timeout(timeout);
wdt_gpi_start();
printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n",
wdt_gpi_name, timeout);
return nonseekable_open(inode, file);
}
static int wdt_gpi_release(struct inode *inode, struct file *file)
{
if (nowayout) {
printk(KERN_INFO "%s: no way out - watchdog left running\n",
wdt_gpi_name);
__module_get(THIS_MODULE);
locked = 1;
} else {
if (expect_close) {
wdt_gpi_stop();
free_irq(wd_irq, &miscdev);
printk(KERN_INFO "%s: watchdog stopped\n",
wdt_gpi_name);
} else {
printk(KERN_CRIT "%s: unexpected close() -"
" watchdog left running\n",
wdt_gpi_name);
wdt_gpi_set_timeout(timeout);
__module_get(THIS_MODULE);
locked = 1;
}
}
atomic_inc(&opencnt);
return 0;
}
static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
loff_t *o)
{
char val;
wdt_gpi_set_timeout(timeout);
expect_close = (s > 0) && !get_user(val, d) && (val == 'V');
return s ? 1 : 0;
}
static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
long res = -ENOTTY;
const long size = _IOC_SIZE(cmd);
int stat;
void __user *argp = (void __user *)arg;
static struct watchdog_info wdinfo = {
.identity = "RM9xxx/GPI watchdog",
.firmware_version = 0,
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
};
if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE))
return -ENOTTY;
if ((_IOC_DIR(cmd) & _IOC_READ)
&& !access_ok(VERIFY_WRITE, arg, size))
return -EFAULT;
if ((_IOC_DIR(cmd) & _IOC_WRITE)
&& !access_ok(VERIFY_READ, arg, size))
return -EFAULT;
expect_close = 0;
switch (cmd) {
case WDIOC_GETSUPPORT:
wdinfo.options = nowayout ?
WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE;
res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size;
break;
case WDIOC_GETSTATUS:
break;
case WDIOC_GETBOOTSTATUS:
stat = (*(volatile char *) flagaddr & 0x01)
? WDIOF_CARDRESET : 0;
res = __copy_to_user(argp, &stat, size) ?
-EFAULT : size;
break;
case WDIOC_SETOPTIONS:
break;
case WDIOC_KEEPALIVE:
wdt_gpi_set_timeout(timeout);
res = size;
break;
case WDIOC_SETTIMEOUT:
{
int val;
if (unlikely(__copy_from_user(&val, argp, size))) {
res = -EFAULT;
break;
}
if (val > MAX_TIMEOUT_SECONDS)
val = MAX_TIMEOUT_SECONDS;
timeout = val;
wdt_gpi_set_timeout(val);
res = size;
printk(KERN_INFO "%s: timeout set to %u seconds\n",
wdt_gpi_name, timeout);
}
break;
case WDIOC_GETTIMEOUT:
res = __copy_to_user(argp, &timeout, size) ?
-EFAULT : size;
break;
}
return res;
}
/* Shutdown notifier */
static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
wdt_gpi_stop();
return NOTIFY_DONE;
}
/* Init & exit procedures */
static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
const char *name, unsigned int type)
{
char buf[80];
if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf))
return NULL;
return platform_get_resource_byname(pdv, type, buf);
}
/* No hotplugging on the platform bus - use __devinit */
static int __devinit wdt_gpi_probe(struct platform_device *pdv)
{
int res;
const struct resource
* const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS,
IORESOURCE_MEM),
* const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ,
IORESOURCE_IRQ),
* const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER,
0);
if (unlikely(!rr || !ri || !rc))
return -ENXIO;
wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start);
if (unlikely(!wd_regs))
return -ENOMEM;
wd_irq = ri->start;
wd_ctr = rc->start;
res = misc_register(&miscdev);
if (res)
iounmap(wd_regs);
else
register_reboot_notifier(&wdt_gpi_shutdown);
return res;
}
static int __devexit wdt_gpi_remove(struct platform_device *dev)
{
int res;
unregister_reboot_notifier(&wdt_gpi_shutdown);
res = misc_deregister(&miscdev);
iounmap(wd_regs);
wd_regs = NULL;
return res;
}
/* Device driver init & exit */
static struct platform_driver wgt_gpi_driver = {
.driver = {
.name = wdt_gpi_name,
.owner = THIS_MODULE,
},
.probe = wdt_gpi_probe,
.remove = __devexit_p(wdt_gpi_remove),
};
static int __init wdt_gpi_init_module(void)
{
atomic_set(&opencnt, 1);
if (timeout > MAX_TIMEOUT_SECONDS)
timeout = MAX_TIMEOUT_SECONDS;
return platform_driver_register(&wdt_gpi_driver);
}
static void __exit wdt_gpi_cleanup_module(void)
{
platform_driver_unregister(&wdt_gpi_driver);
}
module_init(wdt_gpi_init_module);
module_exit(wdt_gpi_cleanup_module);
MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或