From da764f97df0e5e05e5453279f934531c0cf52e11 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 28 Sep 2012 15:58:23 +0530 Subject: [PATCH] mmc: sdhci-spear: Add clk_{un}prepare() support clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar Signed-off-by: Chris Ball --- Documentation/devicetree/bindings/mmc/sdhci-spear.txt | 5 +---- drivers/mmc/host/sdhci-spear.c | 10 +++++----- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt index 84d6e297908f..fd3643e7e467 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt @@ -9,13 +9,10 @@ Required properties: Optional properties: - cd-gpios: card detect gpio, with zero flags. -If your board don't support these gpios then don't pass the entry. - Example: sdhci@fc000000 { compatible = "st,spear300-sdhci"; reg = <0xfc000000 0x1000>; - - cd-gpios = <&gpio0 6 0> + cd-gpios = <&gpio0 6 0>; }; diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index ecad282741d6..6be89c032deb 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -140,7 +140,7 @@ static int __devinit sdhci_probe(struct platform_device *pdev) goto err; } - ret = clk_enable(sdhci->clk); + ret = clk_prepare_enable(sdhci->clk); if (ret) { dev_dbg(&pdev->dev, "Error enabling clock\n"); goto put_clk; @@ -260,7 +260,7 @@ static int __devinit sdhci_probe(struct platform_device *pdev) free_host: sdhci_free_host(host); disable_clk: - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); put_clk: clk_put(sdhci->clk); err: @@ -282,7 +282,7 @@ static int __devexit sdhci_remove(struct platform_device *pdev) sdhci_remove_host(host, dead); sdhci_free_host(host); - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); clk_put(sdhci->clk); return 0; @@ -297,7 +297,7 @@ static int sdhci_suspend(struct device *dev) ret = sdhci_suspend_host(host); if (!ret) - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); return ret; } @@ -308,7 +308,7 @@ static int sdhci_resume(struct device *dev) struct spear_sdhci *sdhci = dev_get_platdata(dev); int ret; - ret = clk_enable(sdhci->clk); + ret = clk_prepare_enable(sdhci->clk); if (ret) { dev_dbg(dev, "Resume: Error enabling clock\n"); return ret; -- GitLab