From d91e3a7d624590220e31ccb80a6fb5247cbfa64a Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Mon, 28 Sep 2015 14:37:47 -0700 Subject: [PATCH] ixgbe: Add KR mode support for CS4227 chip KR auto-neg mode is what we will be using going forward. The SW interface for this mode is different that what was used for iXFI. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 85 ++++++++++++++----- 1 file changed, 62 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index ebe0ac950b14..005f01b80f4a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -26,6 +26,8 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" +static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed); + static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; @@ -1257,31 +1259,71 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, if (status) return status; - /* Configure CS4227 LINE side to 10G SR. */ - slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); - value = IXGBE_CS4227_SPEED_10G; - status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, - value); - - /* Configure CS4227 for HOST connection rate then type. */ - slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); - value = speed & IXGBE_LINK_SPEED_10GB_FULL ? - IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; - status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, - value); + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* Configure CS4227 LINE side to 10G SR. */ + slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); + value = IXGBE_CS4227_SPEED_10G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, + slice, value); + if (status) + goto i2c_err; - slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); - if (setup_linear) - value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; - else + slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12); value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; - status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, - value); + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, + slice, value); + if (status) + goto i2c_err; + + /* Configure CS4227 for HOST connection rate then type. */ + slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); + value = speed & IXGBE_LINK_SPEED_10GB_FULL ? + IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, + slice, value); + if (status) + goto i2c_err; - /* If internal link mode is XFI, then setup XFI internal link. */ - if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) + slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, + slice, value); + if (status) + goto i2c_err; + + /* Setup XFI internal link. */ status = ixgbe_setup_ixfi_x550em(hw, &speed); + if (status) { + hw_dbg(hw, "setup_ixfi failed with %d\n", status); + return status; + } + } else { + /* Configure internal PHY for KR/KX. */ + status = ixgbe_setup_kr_speed_x550em(hw, speed); + if (status) { + hw_dbg(hw, "setup_kr_speed failed with %d\n", status); + return status; + } + /* Configure CS4227 LINE side to proper mode. */ + slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, + slice, value); + if (status) + goto i2c_err; + } + + return 0; + +i2c_err: + hw_dbg(hw, "combined i2c access failed with %d\n", status); return status; } @@ -1982,12 +2024,9 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) * to determine internal PHY mode. */ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - - /* If internal PHY mode is KR, then initialize KR link */ if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { speed = IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL; - ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); } } -- GitLab