diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e5aa081b48450303c00404e5bdfb16730baa8c3f..0659db3747312baf2b4a558e066a1d177d1664e6 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1,5 +1,6 @@ config ARM64 def_bool y + select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index fe9d8f0df4a3d6030281ee29a5a59f18b0fa5642..a70f7141c0f6fa343f15ce45b5c1ca418d927e5c 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -75,12 +75,6 @@ static int __init dt_scan_depth1_nodes(unsigned long node, return 0; } -/* - * Since we're on ARM, the default interrupt routing model - * clearly has to be GIC. - */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC; - /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. @@ -224,73 +218,6 @@ void __init acpi_init_cpus(void) pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus); } -int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) -{ - *irq = irq_find_mapping(NULL, gsi); - - return 0; -} -EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); - -/* - * success: return IRQ number (>0) - * failure: return =< 0 - */ -int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) -{ - unsigned int irq; - unsigned int irq_type; - - /* - * ACPI have no bindings to indicate SPI or PPI, so we - * use different mappings from DT in ACPI. - * - * For FDT - * PPI interrupt: in the range [0, 15]; - * SPI interrupt: in the range [0, 987]; - * - * For ACPI, GSI should be unique so using - * the hwirq directly for the mapping: - * PPI interrupt: in the range [16, 31]; - * SPI interrupt: in the range [32, 1019]; - */ - - if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_EDGE_FALLING; - else if (trigger == ACPI_EDGE_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_EDGE_RISING; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_LOW) - irq_type = IRQ_TYPE_LEVEL_LOW; - else if (trigger == ACPI_LEVEL_SENSITIVE && - polarity == ACPI_ACTIVE_HIGH) - irq_type = IRQ_TYPE_LEVEL_HIGH; - else - irq_type = IRQ_TYPE_NONE; - - /* - * Since only one GIC is supported in ACPI 5.0, we can - * create mapping refer to the default domain - */ - irq = irq_create_mapping(NULL, gsi); - if (!irq) - return irq; - - /* Set irq type if specified and different than the current one */ - if (irq_type != IRQ_TYPE_NONE && - irq_type != irq_get_trigger_type(irq)) - irq_set_irq_type(irq, irq_type); - return irq; -} -EXPORT_SYMBOL_GPL(acpi_register_gsi); - -void acpi_unregister_gsi(u32 gsi) -{ -} -EXPORT_SYMBOL_GPL(acpi_unregister_gsi); - static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table; diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a8f531e2b97c9d8eb57d5f006bf7e8b57b84a3cd..ab2cbb51c6aaccde0ec2f97af343383c6f360dff 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -48,6 +48,9 @@ config ACPI_LEGACY_TABLES_LOOKUP config ARCH_MIGHT_HAVE_ACPI_PDC bool +config ACPI_GENERIC_GSI + bool + config ACPI_SYSTEM_POWER_STATES_SUPPORT bool diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index db153c6a75d7221a486468ba2a1672c30f2c12d3..8a063e276530e244b4020a1e6a6ef6ebec60920e 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -56,6 +56,7 @@ ifdef CONFIG_ACPI_VIDEO acpi-y += video_detect.o endif acpi-y += acpi_lpat.o +acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o # These are (potentially) separate modules diff --git a/drivers/acpi/gsi.c b/drivers/acpi/gsi.c new file mode 100644 index 0000000000000000000000000000000000000000..38208f2d0e69264f5ad71c66ac65be9719fa70ec --- /dev/null +++ b/drivers/acpi/gsi.c @@ -0,0 +1,105 @@ +/* + * ACPI GSI IRQ layer + * + * Copyright (C) 2015 ARM Ltd. + * Author: Lorenzo Pieralisi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +enum acpi_irq_model_id acpi_irq_model; + +static unsigned int acpi_gsi_get_irq_type(int trigger, int polarity) +{ + switch (polarity) { + case ACPI_ACTIVE_LOW: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_FALLING : + IRQ_TYPE_LEVEL_LOW; + case ACPI_ACTIVE_HIGH: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_RISING : + IRQ_TYPE_LEVEL_HIGH; + case ACPI_ACTIVE_BOTH: + if (trigger == ACPI_EDGE_SENSITIVE) + return IRQ_TYPE_EDGE_BOTH; + default: + return IRQ_TYPE_NONE; + } +} + +/** + * acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI + * @gsi: GSI IRQ number to map + * @irq: pointer where linux IRQ number is stored + * + * irq location updated with irq value [>0 on success, 0 on failure] + * + * Returns: linux IRQ number on success (>0) + * -EINVAL on failure + */ +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + /* + * Only default domain is supported at present, always find + * the mapping corresponding to default domain by passing NULL + * as irq_domain parameter + */ + *irq = irq_find_mapping(NULL, gsi); + /* + * *irq == 0 means no mapping, that should + * be reported as a failure + */ + return (*irq > 0) ? *irq : -EINVAL; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/** + * acpi_register_gsi() - Map a GSI to a linux IRQ number + * @dev: device for which IRQ has to be mapped + * @gsi: GSI IRQ number + * @trigger: trigger type of the GSI number to be mapped + * @polarity: polarity of the GSI to be mapped + * + * Returns: a valid linux IRQ number on success + * -EINVAL on failure + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) +{ + unsigned int irq; + unsigned int irq_type = acpi_gsi_get_irq_type(trigger, polarity); + + /* + * There is no way at present to look-up the IRQ domain on ACPI, + * hence always create mapping referring to the default domain + * by passing NULL as irq_domain parameter + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return -EINVAL; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +/** + * acpi_unregister_gsi() - Free a GSI<->linux IRQ number mapping + * @gsi: GSI IRQ number + */ +void acpi_unregister_gsi(u32 gsi) +{ + int irq = irq_find_mapping(NULL, gsi); + + irq_dispose_mapping(irq); +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d15a36a93c523144c7c4231e057a97e6c910f180..f1efb53faebc624e920eeac80702512b7f0a1ff1 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1189,6 +1189,8 @@ gic_v2_acpi_init(struct acpi_table_header *table) */ gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL); irq_set_default_host(gic_data[0].domain); + + acpi_irq_model = ACPI_IRQ_MODEL_GIC; return 0; } #endif