be2net: ignore get/set profile FW cmd failures

Old versions of BE3 FW may not support cmds to re-provision (and hence
optimize) resources/queues in SR-IOV config. Do not treat this FW cmd
failure as fatal and fail the function initialization. Instead, just
enable SR-IOV with the resources provided by the FW.

Prior to the "create optimal number of queues on SR-IOV config" patch
such failures were ignored.
Fixes: bec84e6b ("create optimal number of queues on SR-IOV config")
Reported-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_main.c

@@ -3342,22 +3342,17 @@ static int be_get_sriov_config(struct be_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
 	struct be_resources res = {0};
-	int status, max_vfs, old_vfs;
-
-	status = be_cmd_get_profile_config(adapter, &res, 0);
-	if (status)
-		return status;
-
-	adapter->pool_res = res;
+	int max_vfs, old_vfs;
 
 	/* Some old versions of BE3 FW don't report max_vfs value */
+	be_cmd_get_profile_config(adapter, &res, 0);
+
 	if (BE3_chip(adapter) && !res.max_vfs) {
 		max_vfs = pci_sriov_get_totalvfs(adapter->pdev);
 		res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
 	}
 
-	adapter->pool_res.max_vfs = res.max_vfs;
-	pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
+	adapter->pool_res = res;
 
 	if (!be_max_vfs(adapter)) {
 		if (num_vfs)
@@ -3366,6 +3361,8 @@ static int be_get_sriov_config(struct be_adapter *adapter)
 		return 0;
 	}
 
+	pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
+
 	/* validate num_vfs module param */
 	old_vfs = pci_num_vf(adapter->pdev);
 	if (old_vfs) {
@@ -3423,26 +3420,17 @@ static int be_get_resources(struct be_adapter *adapter)
 	return 0;
 }
 
-static int be_get_config(struct be_adapter *adapter)
+static void be_sriov_config(struct be_adapter *adapter)
 {
-	u16 profile_id;
+	struct device *dev = &adapter->pdev->dev;
 	int status;
 
-	status = be_cmd_query_fw_cfg(adapter);
-	if (status)
-		return status;
-
-	 if (be_physfn(adapter)) {
-		status = be_cmd_get_active_profile(adapter, &profile_id);
-		if (!status)
-			dev_info(&adapter->pdev->dev,
-				 "Using profile 0x%x\n", profile_id);
-	}
-
-	if (!BE2_chip(adapter) && be_physfn(adapter)) {
 	status = be_get_sriov_config(adapter);
-		if (status)
-			return status;
+	if (status) {
+		dev_err(dev, "Failed to query SR-IOV configuration\n");
+		dev_err(dev, "SR-IOV cannot be enabled\n");
+		return;
+	}
 
 	/* When the HW is in SRIOV capable configuration, the PF-pool
 	 * resources are equally distributed across the max-number of
@@ -3452,15 +3440,34 @@ static int be_get_config(struct be_adapter *adapter)
 	 * resources. This facility is not available in BE3 FW.
 	 * Also, this is done by FW in Lancer chip.
 	 */
-		if (!pci_num_vf(adapter->pdev)) {
+	if (be_max_vfs(adapter) && !pci_num_vf(adapter->pdev)) {
 		status = be_cmd_set_sriov_config(adapter,
 						 adapter->pool_res,
 						 adapter->num_vfs);
 		if (status)
-				return status;
+			dev_err(dev, "Failed to optimize SR-IOV resources\n");
 	}
+}
+
+static int be_get_config(struct be_adapter *adapter)
+{
+	u16 profile_id;
+	int status;
+
+	status = be_cmd_query_fw_cfg(adapter);
+	if (status)
+		return status;
+
+	 if (be_physfn(adapter)) {
+		status = be_cmd_get_active_profile(adapter, &profile_id);
+		if (!status)
+			dev_info(&adapter->pdev->dev,
+				 "Using profile 0x%x\n", profile_id);
 	}
 
+	if (!BE2_chip(adapter) && be_physfn(adapter))
+		be_sriov_config(adapter);
+
 	status = be_get_resources(adapter);
 	if (status)
 		return status;