提交 d331e739 编写于 作者: V Venkatesh Pallipadi 提交者: Andi Kleen

[PATCH] x86-64: Fix interrupt race in idle callback (3rd try)

Idle callbacks has some races when enter_idle() sets isidle and subsequent
interrupts that can happen on that CPU, before CPU goes to idle. Due to this,
an IDLE_END can get called before IDLE_START. To avoid these races, disable
interrupts before enter_idle and make sure that all idle routines do not
enable interrupts before entering idle.

Note that poll_idle() still has a this race as it has to enable interrupts
before going to idle. But, all other idle routines have the race fixed.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
上级 a0429d0d
......@@ -127,6 +127,7 @@ static void default_idle(void)
*/
static void poll_idle (void)
{
local_irq_enable();
cpu_relax();
}
......@@ -208,6 +209,12 @@ void cpu_idle (void)
idle = default_idle;
if (cpu_is_offline(smp_processor_id()))
play_dead();
/*
* Idle routines should keep interrupts disabled
* from here on, until they go to idle.
* Otherwise, idle callbacks can misfire.
*/
local_irq_disable();
enter_idle();
idle();
/* In many cases the interrupt that ended idle
......@@ -245,8 +252,16 @@ void mwait_idle_with_hints(unsigned long eax, unsigned long ecx)
/* Default MONITOR/MWAIT with no hints, used for default C1 state */
static void mwait_idle(void)
{
if (!need_resched()) {
__monitor((void *)&current_thread_info()->flags, 0, 0);
smp_mb();
if (!need_resched())
__sti_mwait(0, 0);
else
local_irq_enable();
mwait_idle_with_hints(0,0);
} else {
local_irq_enable();
}
}
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
......
......@@ -475,6 +475,14 @@ static inline void __mwait(unsigned long eax, unsigned long ecx)
: :"a" (eax), "c" (ecx));
}
static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
{
/* "mwait %eax,%ecx;" */
asm volatile(
"sti; .byte 0x0f,0x01,0xc9;"
: :"a" (eax), "c" (ecx));
}
extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
#define stack_current() \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册