提交 c74db86b 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] Add position_fix module option

Documentation,HDA Intel driver
Added position_fix module option to HDA-intel driver for fixing up
the DMA position (possibly hardware-) bugs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 091bf4dc
......@@ -618,6 +618,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for Intel HD Audio (ICH6, ICH6M, ICH7)
model - force the model name
position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF)
Module supports up to 8 cards.
......@@ -643,6 +644,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
(Usually SD_LPLIB register is more accurate than the
position buffer.)
Module snd-hdsp
---------------
......
......@@ -51,6 +51,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static char *model[SNDRV_CARDS];
static int position_fix[SNDRV_CARDS];
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
......@@ -60,6 +61,8 @@ module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Intel HD audio interface.");
module_param_array(model, charp, NULL, 0444);
MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, bool, NULL, 0444);
MODULE_PARM_DESC(position_fix, "Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF).");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
......@@ -183,6 +186,12 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define ICH6_MAX_CORB_ENTRIES 256
#define ICH6_MAX_RIRB_ENTRIES 256
/* position fix mode */
enum {
POS_FIX_FIFO,
POS_FIX_NONE,
POS_FIX_POSBUF
};
/*
* Use CORB/RIRB for communication from/to codecs.
......@@ -190,12 +199,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
*/
#define USE_CORB_RIRB
/*
* Define this if use the position buffer instead of reading SD_LPIB
* It's not used as default since SD_LPIB seems to give more accurate position
*/
/* #define USE_POSBUF */
/*
*/
......@@ -271,6 +274,9 @@ struct snd_azx {
struct snd_dma_buffer bdl;
struct snd_dma_buffer rb;
struct snd_dma_buffer posbuf;
/* flags */
int position_fix;
};
/*
......@@ -657,11 +663,11 @@ static void azx_init_chip(azx_t *chip)
/* initialize the codec command I/O */
azx_init_cmd_io(chip);
#ifdef USE_POSBUF
if (chip->position_fix == POS_FIX_POSBUF) {
/* program the position buffer */
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
azx_writel(chip, DPUBASE, upper_32bit(chip->posbuf.addr));
#endif
}
}
......@@ -791,11 +797,12 @@ static int azx_setup_controller(azx_t *chip, azx_dev_t *azx_dev)
/* upper BDL address */
azx_sd_writel(azx_dev, SD_BDLPU, upper_32bit(azx_dev->bdl_addr));
#ifdef USE_POSBUF
if (chip->position_fix == POS_FIX_POSBUF) {
/* enable the position buffer */
if (! (azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
#endif
}
/* set the interrupt enable bits in the descriptor control register */
azx_sd_writel(azx_dev, SD_CTL, azx_sd_readl(azx_dev, SD_CTL) | SD_INT_MASK);
......@@ -1036,16 +1043,20 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd)
static snd_pcm_uframes_t azx_pcm_pointer(snd_pcm_substream_t *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
azx_t *chip = apcm->chip;
azx_dev_t *azx_dev = get_azx_dev(substream);
unsigned int pos;
#ifdef USE_POSBUF
if (chip->position_fix == POS_FIX_POSBUF) {
/* use the position buffer */
pos = *azx_dev->posbuf;
#else
} else {
/* read LPIB */
pos = azx_sd_readl(azx_dev, SD_LPIB) + azx_dev->fifo_size;
#endif
pos = azx_sd_readl(azx_dev, SD_LPIB);
if (chip->position_fix == POS_FIX_FIFO)
pos += azx_dev->fifo_size;
}
if (pos >= azx_dev->bufsize)
pos = 0;
return bytes_to_frames(substream->runtime, pos);
......@@ -1155,9 +1166,8 @@ static int __devinit azx_init_stream(azx_t *chip)
azx_dev_t *azx_dev = &chip->azx_dev[i];
azx_dev->bdl = (u32 *)(chip->bdl.area + off);
azx_dev->bdl_addr = chip->bdl.addr + off;
#ifdef USE_POSBUF
if (chip->position_fix == POS_FIX_POSBUF)
azx_dev->posbuf = (volatile u32 *)(chip->posbuf.area + i * 8);
#endif
/* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
azx_dev->sd_addr = chip->remap_addr + (0x20 * i + 0x80);
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */
......@@ -1237,10 +1247,8 @@ static int azx_free(azx_t *chip)
snd_dma_free_pages(&chip->bdl);
if (chip->rb.area)
snd_dma_free_pages(&chip->rb);
#ifdef USE_POSBUF
if (chip->posbuf.area)
snd_dma_free_pages(&chip->posbuf);
#endif
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip);
......@@ -1256,7 +1264,8 @@ static int azx_dev_free(snd_device_t *device)
/*
* constructor
*/
static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **rchip)
static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci,
int posfix, azx_t **rchip)
{
azx_t *chip;
int err = 0;
......@@ -1283,6 +1292,8 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **r
chip->pci = pci;
chip->irq = -1;
chip->position_fix = posfix;
if ((err = pci_request_regions(pci, "ICH HD audio")) < 0) {
kfree(chip);
pci_disable_device(pci);
......@@ -1314,14 +1325,14 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **r
snd_printk(KERN_ERR SFX "cannot allocate BDL\n");
goto errout;
}
#ifdef USE_POSBUF
if (chip->position_fix == POS_FIX_POSBUF) {
/* allocate memory for the position buffer */
if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci),
MAX_ICH6_DEV * 8, &chip->posbuf)) < 0) {
snd_printk(KERN_ERR SFX "cannot allocate posbuf\n");
goto errout;
}
#endif
}
/* allocate CORB/RIRB */
if ((err = azx_alloc_cmd_io(chip)) < 0)
goto errout;
......@@ -1372,7 +1383,7 @@ static int __devinit azx_probe(struct pci_dev *pci, const struct pci_device_id *
return -ENOMEM;
}
if ((err = azx_create(card, pci, &chip)) < 0) {
if ((err = azx_create(card, pci, position_fix[dev], &chip)) < 0) {
snd_card_free(card);
return err;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册