From c713f57ed5eb2e073de9d60ee1da25939966647e Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Tue, 17 Jul 2007 04:04:18 -0700
Subject: [PATCH] sane irq initialization in sedlbauer hisax

The interrupts schould be disabled until the driver
is ready and the IRQ function was registered.

Thanks to Bastian Friedrich  and Thomas Voegtle for spotting this.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Bastian Friedrich <bastian@bastian-friedrich.de>
Signed-off-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/hisax/sedlbauer.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 030d1625c5c6..ad06f3cc60fb 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -451,6 +451,9 @@ Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 			spin_unlock_irqrestore(&cs->lock, flags);
 			return(0);
 		case CARD_RELEASE:
+			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+				/* disable all IRQ */
+				byteout(cs->hw.sedl.cfg_reg+ 5, 0);
 			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 				spin_lock_irqsave(&cs->lock, flags);
 				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
@@ -468,6 +471,9 @@ Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 			return(0);
 		case CARD_INIT:
 			spin_lock_irqsave(&cs->lock, flags);
+			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+				/* enable all IRQ */
+				byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
 			reset_sedlbauer(cs);
 			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 				clear_pending_isac_ints(cs);
@@ -667,7 +673,7 @@ setup_sedlbauer(struct IsdnCard *card)
 		byteout(cs->hw.sedl.cfg_reg, 0xff);
 		byteout(cs->hw.sedl.cfg_reg, 0x00);
 		byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
-		byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
+		byteout(cs->hw.sedl.cfg_reg+ 5, 0); /* disable all IRQ */
 		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
 		mdelay(2);
 		byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
-- 
GitLab