MIPS: lantiq: add reset-controller api support

Add a reset-controller binding for the reset registers found on the lantiq
SoC.
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8043/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -296,6 +296,8 @@ config LANTIQ
 	select USE_OF
 	select PINCTRL
 	select PINCTRL_LANTIQ
+	select ARCH_HAS_RESET_CONTROLLER
+	select RESET_CONTROLLER
 
 config LASAT
 	bool "LASAT Networks platforms"

arch/mips/lantiq/xway/reset.c

@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
 
@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module, ulong u)
 	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
 }
 
+static int ltq_assert_device(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = ltq_rcu_r32(RCU_RST_REQ);
+	val |= BIT(id);
+	ltq_rcu_w32(val, RCU_RST_REQ);
+
+	return 0;
+}
+
+static int ltq_deassert_device(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = ltq_rcu_r32(RCU_RST_REQ);
+	val &= ~BIT(id);
+	ltq_rcu_w32(val, RCU_RST_REQ);
+
+	return 0;
+}
+
+static int ltq_reset_device(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	ltq_assert_device(rcdev, id);
+	return ltq_deassert_device(rcdev, id);
+}
+
+static struct reset_control_ops reset_ops = {
+	.reset = ltq_reset_device,
+	.assert = ltq_assert_device,
+	.deassert = ltq_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+	.ops			= &reset_ops,
+	.owner			= THIS_MODULE,
+	.nr_resets		= 32,
+	.of_reset_n_cells	= 1,
+};
+
+void ltq_rst_init(void)
+{
+	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+						"lantiq,xway-reset");
+	if (!reset_dev.of_node)
+		pr_err("Failed to find reset controller node");
+	else
+		reset_controller_register(&reset_dev);
+}
+
 static void ltq_machine_restart(char *command)
 {
 	local_irq_disable();