ide: add ->cable_detect method to ide_hwif_t

* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()
Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 c413b9b9
......@@ -1343,6 +1343,11 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
d->init_hwif(hwif);
if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = hwif->cable_detect(hwif);
}
}
int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
......
......@@ -166,6 +166,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
return dev->irq;
}
static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
pci_read_config_byte(dev, 0x49, &ata66);
return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -174,21 +184,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
else
else {
hwif->set_dma_mode = &aec6260_set_mode;
if (hwif->dma_base == 0)
return;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
pci_read_config_byte(dev, 0x49, &ata66);
hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
hwif->cable_detect = atp86x_cable_detect;
}
}
......
......@@ -666,13 +666,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
hwif->set_dma_mode = &ali_set_dma_mode;
hwif->udma_filter = &ali_udma_filter;
hwif->cable_detect = ata66_ali15x3;
if (hwif->dma_base == 0)
return;
hwif->dma_setup = &ali15x3_dma_setup;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_ali15x3(hwif);
}
/**
......
......@@ -199,6 +199,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
return dev->irq;
}
static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
{
if ((amd_80w >> hwif->channel) & 1)
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -209,15 +217,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
if (!hwif->dma_base)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
if ((amd_80w >> hwif->channel) & 1)
hwif->cbl = ATA_CBL_PATA80;
else
hwif->cbl = ATA_CBL_PATA40;
}
hwif->cable_detect = amd_cable_detect;
}
#define IDE_HFLAGS_AMD \
......
......@@ -147,11 +147,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
if (!hwif->dma_base)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = atiixp_cable_detect(hwif);
hwif->cable_detect = atiixp_cable_detect;
}
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
......
......@@ -393,6 +393,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
hwif->cable_detect = ata66_cmd64x;
if (!hwif->dma_base)
return;
......@@ -411,9 +413,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
hwif->ultra_mask = 0x00;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_cmd64x(hwif);
switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
......
......@@ -179,11 +179,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
if (hwif->dma_base == 0)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = cs5535_cable_detect(hwif);
hwif->cable_detect = cs5535_cable_detect;
}
static const struct ide_port_info cs5535_chipset __devinitdata = {
......
......@@ -1279,12 +1279,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
return dev->irq;
}
static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
* address lines to access an external EEPROM. To read valid
* cable detect state the pins must be enabled as inputs.
*/
if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
/*
* HPT374 PCI function 1
* - set bit 15 of reg 0x52 to enable TCBLID as input
* - set bit 15 of reg 0x56 to enable FCBLID as input
*/
u8 mcr_addr = hwif->select_data + 2;
u16 mcr;
pci_read_config_word(dev, mcr_addr, &mcr);
pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
/* now read cable id register */
pci_read_config_byte(dev, 0x5a, &scr1);
pci_write_config_word(dev, mcr_addr, mcr);
} else if (chip_type >= HPT370) {
/*
* HPT370/372 and 374 pcifn 0
* - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
*/
u8 scr2 = 0;
pci_read_config_byte(dev, 0x5b, &scr2);
pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
/* now read cable id register */
pci_read_config_byte(dev, 0x5a, &scr1);
pci_write_config_byte(dev, 0x5b, scr2);
} else
pci_read_config_byte(dev, 0x5a, &scr1);
return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
......@@ -1301,6 +1344,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->udma_filter = &hpt3xx_udma_filter;
hwif->mdma_filter = &hpt3xx_mdma_filter;
hwif->cable_detect = hpt3xx_cable_detect;
/*
* HPT3xxN chips have some complications:
*
......@@ -1346,43 +1391,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
* address lines to access an external EEPROM. To read valid
* cable detect state the pins must be enabled as inputs.
*/
if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
/*
* HPT374 PCI function 1
* - set bit 15 of reg 0x52 to enable TCBLID as input
* - set bit 15 of reg 0x56 to enable FCBLID as input
*/
u8 mcr_addr = hwif->select_data + 2;
u16 mcr;
pci_read_config_word (dev, mcr_addr, &mcr);
pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
/* now read cable id register */
pci_read_config_byte (dev, 0x5a, &scr1);
pci_write_config_word(dev, mcr_addr, mcr);
} else if (chip_type >= HPT370) {
/*
* HPT370/372 and 374 pcifn 0
* - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
*/
u8 scr2 = 0;
pci_read_config_byte (dev, 0x5b, &scr2);
pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
/* now read cable id register */
pci_read_config_byte (dev, 0x5a, &scr1);
pci_write_config_byte(dev, 0x5b, scr2);
} else
pci_read_config_byte (dev, 0x5a, &scr1);
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
if (chip_type >= HPT374) {
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
......
......@@ -143,6 +143,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
pci_read_config_byte(dev, 0x42, &reg42h);
return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
......@@ -152,19 +162,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
if (!hwif->dma_base)
return;
pci_read_config_byte(dev, 0x42, &reg42h);
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
hwif->cable_detect = it8213_cable_detect;
}
......
......@@ -579,14 +579,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
hwif->cable_detect = ata66_it821x;
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = ATA_UDMA6;
hwif->mwdma_mask = ATA_MWDMA2;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_it821x(hwif);
}
static void __devinit it8212_disable_raid(struct pci_dev *dev)
......
......@@ -111,11 +111,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->set_dma_mode = &jmicron_set_dma_mode;
if (hwif->dma_base == 0)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_jmicron(hwif);
hwif->cable_detect = ata66_jmicron;
}
static const struct ide_port_info jmicron_chipset __devinitdata = {
......
......@@ -197,7 +197,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
}
static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif)
{
if (get_indexed_reg(hwif, 0x0b) & 0x04)
return ATA_CBL_PATA40;
......@@ -456,11 +456,7 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
hwif->quirkproc = &pdcnew_quirkproc;
hwif->resetproc = &pdcnew_reset;
if (hwif->dma_base == 0)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = pdcnew_cable_detect(hwif);
hwif->cable_detect = pdcnew_cable_detect;
}
static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
......
......@@ -140,7 +140,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
}
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
......@@ -311,9 +311,12 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->quirkproc = &pdc202xx_quirkproc;
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
hwif->resetproc = &pdc202xx_reset;
hwif->cable_detect = pdc2026x_old_cable_detect;
}
if (hwif->dma_base == 0)
return;
......@@ -321,9 +324,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->dma_timeout = &pdc202xx_dma_timeout;
if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = pdc202xx_old_cable_detect(hwif);
hwif->dma_start = &pdc202xx_old_ide_dma_start;
hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
}
......
......@@ -290,14 +290,11 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->set_dma_mode = &piix_set_dma_mode;
hwif->cable_detect = piix_cable_detect;
if (!hwif->dma_base)
return;
if (hwif->ultra_mask & 0x78) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = piix_cable_detect(hwif);
}
if (no_piix_dma)
hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
}
......
......@@ -683,8 +683,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
else
hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = scc_cable_detect(hwif);
hwif->cable_detect = scc_cable_detect;
}
#define DECLARE_SCC_DEV(name_str) \
......
......@@ -346,13 +346,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
if (!hwif->dma_base)
return;
if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_svwks(hwif);
}
if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
hwif->cable_detect = ata66_svwks;
}
#define IDE_HFLAGS_SVWKS \
......
......@@ -827,15 +827,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
} else
hwif->udma_filter = &sil_pata_udma_filter;
hwif->cable_detect = ata66_siimage;
if (hwif->dma_base == 0)
return;
if (sata)
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_siimage(hwif);
if (hwif->mmio) {
hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
} else {
......
......@@ -565,13 +565,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (chipset_family >= ATA_133)
hwif->udma_filter = sis5513_ata133_udma_filter;
hwif->cable_detect = ata66_sis5513;
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = udma_rates[chipset_family];
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_sis5513(hwif);
}
static const struct ide_port_info sis5513_chipset __devinitdata = {
......
......@@ -118,23 +118,23 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg47 = 0;
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
pci_read_config_byte(dev, 0x47, &reg47);
if (hwif->dma_base == 0)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
/* bit[0(1)]: 0:80, 1:40 */
hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
hwif->cable_detect = slc90e66_cable_detect;
}
static const struct ide_port_info slc90e66_chipset __devinitdata = {
......
......@@ -160,6 +160,19 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
return 0;
}
static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long sc_base = pci_resource_start(dev, 5);
u16 scr1 = inw(sc_base + 0x00);
/*
* System Control 1 Register bit 13 (PDIAGN):
* 0=80-pin cable, 1=40-pin cable
*/
return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -183,6 +196,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->busproc = &tc86c001_busproc;
hwif->cable_detect = tc86c001_cable_detect;
if (!hwif->dma_base)
return;
......@@ -196,15 +211,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->rqsize = 0xffff;
hwif->dma_start = &tc86c001_dma_start;
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
/*
* System Control 1 Register bit 13 (PDIAGN):
* 0=80-pin cable, 1=40-pin cable
*/
scr1 = inw(sc_base + 0x00);
hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
}
static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
......
......@@ -424,11 +424,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->set_pio_mode = &via_set_pio_mode;
hwif->set_dma_mode = &via_set_drive;
if (!hwif->dma_base)
return;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = via82cxxx_cable_detect(hwif);
hwif->cable_detect = via82cxxx_cable_detect;
}
static const struct ide_port_info via82cxxx_chipset __devinitdata = {
......
......@@ -535,6 +535,8 @@ typedef struct hwif_s {
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
u8 (*cable_detect)(struct hwif_s *);
void (*ata_input_data)(ide_drive_t *, void *, u32);
void (*ata_output_data)(ide_drive_t *, void *, u32);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册