提交 baf387a8 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: systemport: Pre-calculate and utilize cb->bd_addr

There is a 1:1 mapping between the software maintained control block in
priv->rx_cbs and the buffer address in priv->rx_bds, such that there is
no need to keep computing the buffer address when refiling a control
block.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 3d2f6d41
......@@ -549,12 +549,7 @@ static int bcm_sysport_rx_refill(struct bcm_sysport_priv *priv,
}
dma_unmap_addr_set(cb, dma_addr, mapping);
dma_desc_set_addr(priv, priv->rx_bd_assign_ptr, mapping);
priv->rx_bd_assign_index++;
priv->rx_bd_assign_index &= (priv->num_rx_bds - 1);
priv->rx_bd_assign_ptr = priv->rx_bds +
(priv->rx_bd_assign_index * DESC_SIZE);
dma_desc_set_addr(priv, cb->bd_addr, mapping);
netif_dbg(priv, rx_status, ndev, "RX refill\n");
......@@ -568,7 +563,7 @@ static int bcm_sysport_alloc_rx_bufs(struct bcm_sysport_priv *priv)
unsigned int i;
for (i = 0; i < priv->num_rx_bds; i++) {
cb = &priv->rx_cbs[priv->rx_bd_assign_index];
cb = &priv->rx_cbs[i];
if (cb->skb)
continue;
......@@ -1330,14 +1325,14 @@ static inline int tdma_enable_set(struct bcm_sysport_priv *priv,
static int bcm_sysport_init_rx_ring(struct bcm_sysport_priv *priv)
{
struct bcm_sysport_cb *cb;
u32 reg;
int ret;
int i;
/* Initialize SW view of the RX ring */
priv->num_rx_bds = NUM_RX_DESC;
priv->rx_bds = priv->base + SYS_PORT_RDMA_OFFSET;
priv->rx_bd_assign_ptr = priv->rx_bds;
priv->rx_bd_assign_index = 0;
priv->rx_c_index = 0;
priv->rx_read_ptr = 0;
priv->rx_cbs = kcalloc(priv->num_rx_bds, sizeof(struct bcm_sysport_cb),
......@@ -1347,6 +1342,11 @@ static int bcm_sysport_init_rx_ring(struct bcm_sysport_priv *priv)
return -ENOMEM;
}
for (i = 0; i < priv->num_rx_bds; i++) {
cb = priv->rx_cbs + i;
cb->bd_addr = priv->rx_bds + i * DESC_SIZE;
}
ret = bcm_sysport_alloc_rx_bufs(priv);
if (ret) {
netif_err(priv, hw, priv->netdev, "SKB allocation failed\n");
......
......@@ -663,8 +663,6 @@ struct bcm_sysport_priv {
/* Receive queue */
void __iomem *rx_bds;
void __iomem *rx_bd_assign_ptr;
unsigned int rx_bd_assign_index;
struct bcm_sysport_cb *rx_cbs;
unsigned int num_rx_bds;
unsigned int rx_read_ptr;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册