提交 b9e7638a 编写于 作者: D Dave Jones

[CPUFREQ] checkpatch cleanups for powernow-k7

The asm/timer.h warning can be ignored, it's needed for
recalibrate_cpu_khz()
Signed-off-by: NDave Jones <davej@redhat.com>
上级 bbfebd66
......@@ -6,9 +6,11 @@
* Licensed under the terms of the GNU GPL License version 2.
* Based upon datasheets & sample CPUs kindly provided by AMD.
*
* Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
* Errata 5:
* CPU may fail to execute a FID/VID change in presence of interrupt.
* - We cli/sti on stepping A0 CPUs around the FID/VID transition.
* Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
* Errata 15:
* CPU with half frequency multipliers may hang upon wakeup from disconnect.
* - We disable half multipliers if ACPI is used on A0 stepping CPUs.
*/
......@@ -20,11 +22,11 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/dmi.h>
#include <linux/timex.h>
#include <linux/io.h>
#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */
#include <asm/msr.h>
#include <asm/timer.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <asm/system.h>
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
......@@ -101,7 +103,8 @@ static unsigned int fsb;
static unsigned int latency;
static char have_a0;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
"powernow-k7", msg)
static int check_fsb(unsigned int fsbspeed)
{
......@@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed)
unsigned int f = fsb / 1000;
delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
return (delta < 5);
return delta < 5;
}
static int check_powernow(void)
......@@ -117,24 +120,26 @@ static int check_powernow(void)
struct cpuinfo_x86 *c = &cpu_data(0);
unsigned int maxei, eax, ebx, ecx, edx;
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
#ifdef MODULE
printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
printk(KERN_INFO PFX "This module only works with "
"AMD K7 CPUs\n");
#endif
return 0;
}
/* Get maximum capabilities */
maxei = cpuid_eax (0x80000000);
maxei = cpuid_eax(0x80000000);
if (maxei < 0x80000007) { /* Any powernow info ? */
#ifdef MODULE
printk (KERN_INFO PFX "No powernow capabilities detected\n");
printk(KERN_INFO PFX "No powernow capabilities detected\n");
#endif
return 0;
}
if ((c->x86_model == 6) && (c->x86_mask == 0)) {
printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
printk(KERN_INFO PFX "K7 660[A0] core detected, "
"enabling errata workarounds\n");
have_a0 = 1;
}
......@@ -144,37 +149,42 @@ static int check_powernow(void)
if (!(edx & (1 << 1 | 1 << 2)))
return 0;
printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
if (edx & 1 << 1) {
printk ("frequency");
can_scale_bus=1;
printk("frequency");
can_scale_bus = 1;
}
if ((edx & (1 << 1 | 1 << 2)) == 0x6)
printk (" and ");
printk(" and ");
if (edx & 1 << 2) {
printk ("voltage");
can_scale_vid=1;
printk("voltage");
can_scale_vid = 1;
}
printk (".\n");
printk(".\n");
return 1;
}
static void invalidate_entry(unsigned int entry)
{
powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
}
static int get_ranges (unsigned char *pst)
static int get_ranges(unsigned char *pst)
{
unsigned int j;
unsigned int speed;
u8 fid, vid;
powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
(number_scales + 1)), GFP_KERNEL);
if (!powernow_table)
return -ENOMEM;
for (j=0 ; j < number_scales; j++) {
for (j = 0 ; j < number_scales; j++) {
fid = *pst++;
powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
......@@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst)
speed = powernow_table[j].frequency;
if ((fid_codes[fid] % 10)==5) {
if ((fid_codes[fid] % 10) == 5) {
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
if (have_a0 == 1)
powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
invalidate_entry(j);
#endif
}
......@@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst)
vid = *pst++;
powernow_table[j].index |= (vid << 8); /* upper 8 bits */
dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
dprintk(" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
fid_codes[fid] % 10, speed/1000, vid,
mobile_vid_table[vid]/1000,
......@@ -214,13 +224,13 @@ static void change_FID(int fid)
{
union msr_fidvidctl fidvidctl;
rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
if (fidvidctl.bits.FID != fid) {
fidvidctl.bits.SGTC = latency;
fidvidctl.bits.FID = fid;
fidvidctl.bits.VIDC = 0;
fidvidctl.bits.FIDC = 1;
wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
}
}
......@@ -229,18 +239,18 @@ static void change_VID(int vid)
{
union msr_fidvidctl fidvidctl;
rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
if (fidvidctl.bits.VID != vid) {
fidvidctl.bits.SGTC = latency;
fidvidctl.bits.VID = vid;
fidvidctl.bits.FIDC = 0;
fidvidctl.bits.VIDC = 1;
wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
}
}
static void change_speed (unsigned int index)
static void change_speed(unsigned int index)
{
u8 fid, vid;
struct cpufreq_freqs freqs;
......@@ -257,7 +267,7 @@ static void change_speed (unsigned int index)
freqs.cpu = 0;
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
cfid = fidvidstatus.bits.CFID;
freqs.old = fsb * fid_codes[cfid] / 10;
......@@ -321,12 +331,14 @@ static int powernow_acpi_init(void)
goto err1;
}
if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
if (acpi_processor_perf->control_register.space_id !=
ACPI_ADR_SPACE_FIXED_HARDWARE) {
retval = -ENODEV;
goto err2;
}
if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
if (acpi_processor_perf->status_register.space_id !=
ACPI_ADR_SPACE_FIXED_HARDWARE) {
retval = -ENODEV;
goto err2;
}
......@@ -338,7 +350,8 @@ static int powernow_acpi_init(void)
goto err2;
}
powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
(number_scales + 1)), GFP_KERNEL);
if (!powernow_table) {
retval = -ENOMEM;
goto err2;
......@@ -352,7 +365,7 @@ static int powernow_acpi_init(void)
unsigned int speed, speed_mhz;
pc.val = (unsigned long) state->control;
dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
i,
(u32) state->core_frequency,
(u32) state->power,
......@@ -381,12 +394,12 @@ static int powernow_acpi_init(void)
if (speed % 1000 > 0)
speed_mhz++;
if ((fid_codes[fid] % 10)==5) {
if ((fid_codes[fid] % 10) == 5) {
if (have_a0 == 1)
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
invalidate_entry(i);
}
dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
dprintk(" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
fid_codes[fid] % 10, speed_mhz, vid,
mobile_vid_table[vid]/1000,
......@@ -422,7 +435,8 @@ static int powernow_acpi_init(void)
err05:
kfree(acpi_processor_perf);
err0:
printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
printk(KERN_WARNING PFX "ACPI perflib can not be used on "
"this platform\n");
acpi_processor_perf = NULL;
return retval;
}
......@@ -435,7 +449,14 @@ static int powernow_acpi_init(void)
}
#endif
static int powernow_decode_bios (int maxfid, int startvid)
static void print_pst_entry(struct pst_s *pst, unsigned int j)
{
dprintk("PST:%d (@%p)\n", j, pst);
dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
}
static int powernow_decode_bios(int maxfid, int startvid)
{
struct psb_s *psb;
struct pst_s *pst;
......@@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid)
etuple = cpuid_eax(0x80000001);
for (i=0xC0000; i < 0xffff0 ; i+=16) {
for (i = 0xC0000; i < 0xffff0 ; i += 16) {
p = phys_to_virt(i);
if (memcmp(p, "AMDK7PNOW!", 10) == 0){
dprintk ("Found PSB header at %p\n", p);
if (memcmp(p, "AMDK7PNOW!", 10) == 0) {
dprintk("Found PSB header at %p\n", p);
psb = (struct psb_s *) p;
dprintk ("Table version: 0x%x\n", psb->tableversion);
dprintk("Table version: 0x%x\n", psb->tableversion);
if (psb->tableversion != 0x12) {
printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
printk(KERN_INFO PFX "Sorry, only v1.2 tables"
" supported right now\n");
return -ENODEV;
}
dprintk ("Flags: 0x%x\n", psb->flags);
if ((psb->flags & 1)==0) {
dprintk ("Mobile voltage regulator\n");
} else {
dprintk ("Desktop voltage regulator\n");
}
dprintk("Flags: 0x%x\n", psb->flags);
if ((psb->flags & 1) == 0)
dprintk("Mobile voltage regulator\n");
else
dprintk("Desktop voltage regulator\n");
latency = psb->settlingtime;
if (latency < 100) {
printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. "
"Should be at least 100. Correcting.\n", latency);
printk(KERN_INFO PFX "BIOS set settling time "
"to %d microseconds. "
"Should be at least 100. "
"Correcting.\n", latency);
latency = 100;
}
dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
dprintk("Settling Time: %d microseconds.\n",
psb->settlingtime);
dprintk("Has %d PST tables. (Only dumping ones "
"relevant to this CPU).\n",
psb->numpst);
p += sizeof (struct psb_s);
p += sizeof(struct psb_s);
pst = (struct pst_s *) p;
for (j=0; j<psb->numpst; j++) {
for (j = 0; j < psb->numpst; j++) {
pst = (struct pst_s *) p;
number_scales = pst->numpstates;
if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
(maxfid==pst->maxfid) && (startvid==pst->startvid))
{
dprintk ("PST:%d (@%p)\n", j, pst);
dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
ret = get_ranges ((char *) pst + sizeof (struct pst_s));
if ((etuple == pst->cpuid) &&
check_fsb(pst->fsbspeed) &&
(maxfid == pst->maxfid) &&
(startvid == pst->startvid)) {
print_pst_entry(pst, j);
p = (char *)pst + sizeof(struct pst_s);
ret = get_ranges(p);
return ret;
} else {
unsigned int k;
p = (char *) pst + sizeof (struct pst_s);
for (k=0; k<number_scales; k++)
p+=2;
p = (char *)pst + sizeof(struct pst_s);
for (k = 0; k < number_scales; k++)
p += 2;
}
}
printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
printk(KERN_INFO PFX "No PST tables match this cpuid "
"(0x%x)\n", etuple);
printk(KERN_INFO PFX "This is indicative of a broken "
"BIOS.\n");
return -EINVAL;
}
......@@ -511,13 +538,14 @@ static int powernow_decode_bios (int maxfid, int startvid)
}
static int powernow_target (struct cpufreq_policy *policy,
static int powernow_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int newstate;
if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
relation, &newstate))
return -EINVAL;
change_speed(newstate);
......@@ -526,7 +554,7 @@ static int powernow_target (struct cpufreq_policy *policy,
}
static int powernow_verify (struct cpufreq_policy *policy)
static int powernow_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, powernow_table);
}
......@@ -566,18 +594,23 @@ static unsigned int powernow_get(unsigned int cpu)
if (cpu)
return 0;
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
cfid = fidvidstatus.bits.CFID;
return (fsb * fid_codes[cfid] / 10);
return fsb * fid_codes[cfid] / 10;
}
static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
{
printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
printk(KERN_WARNING PFX
"%s laptop with broken PST tables in BIOS detected.\n",
d->ident);
printk(KERN_WARNING PFX
"You need to downgrade to 3A21 (09/09/2002), or try a newer "
"BIOS than 3A71 (01/20/2003)\n");
printk(KERN_WARNING PFX
"cpufreq scaling has been disabled as a result of this.\n");
return 0;
}
......@@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = {
{ }
};
static int __init powernow_cpu_init (struct cpufreq_policy *policy)
static int __init powernow_cpu_init(struct cpufreq_policy *policy)
{
union msr_fidvidstatus fidvidstatus;
int result;
......@@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
if (policy->cpu != 0)
return -ENODEV;
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
recalibrate_cpu_khz();
......@@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
dprintk("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n");
printk(KERN_INFO PFX "PSB/PST known to be broken. "
"Trying ACPI instead\n");
result = powernow_acpi_init();
} else {
result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
result = powernow_decode_bios(fidvidstatus.bits.MFID,
fidvidstatus.bits.SVID);
if (result) {
printk (KERN_INFO PFX "Trying ACPI perflib\n");
printk(KERN_INFO PFX "Trying ACPI perflib\n");
maximum_speed = 0;
minimum_speed = -1;
latency = 0;
result = powernow_acpi_init();
if (result) {
printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n");
printk(KERN_INFO PFX
"ACPI and legacy methods failed\n");
}
} else {
/* SGTC use the bus clock as timer */
......@@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
if (result)
return result;
printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
minimum_speed/1000, maximum_speed/1000);
policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
policy->cpuinfo.transition_latency =
cpufreq_scale(2000000UL, fsb, latency);
policy->cur = powernow_get(0);
......@@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
}
static int powernow_cpu_exit (struct cpufreq_policy *policy) {
static int powernow_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
......@@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) {
return 0;
}
static struct freq_attr* powernow_table_attr[] = {
static struct freq_attr *powernow_table_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
......@@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = {
.attr = powernow_table_attr,
};
static int __init powernow_init (void)
static int __init powernow_init(void)
{
if (check_powernow()==0)
if (check_powernow() == 0)
return -ENODEV;
return cpufreq_register_driver(&powernow_driver);
}
static void __exit powernow_exit (void)
static void __exit powernow_exit(void)
{
cpufreq_unregister_driver(&powernow_driver);
}
......@@ -701,9 +738,9 @@ static void __exit powernow_exit (void)
module_param(acpi_force, int, 0444);
MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
MODULE_LICENSE ("GPL");
MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
MODULE_LICENSE("GPL");
late_initcall(powernow_init);
module_exit(powernow_exit);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册