提交 b7c4948e 编写于 作者: H Hidehiro Kawai 提交者: Thomas Gleixner

x86/apic: Introduce apic_extnmi command line parameter

This patch introduces a command line parameter apic_extnmi:

 apic_extnmi=( bsp|all|none )

The default value is "bsp" and this is the current behavior: only the
Boot-Strapping Processor receives an external NMI.

"all" allows external NMIs to be broadcast to all CPUs. This would
raise the success rate of panic on NMI when BSP hangs in NMI context
or the external NMI is swallowed by other NMI handlers on the BSP.

If you specify "none", no CPUs receive external NMIs. This is useful for
the dump capture kernel so that it cannot be shot down by accidentally
pressing the external NMI button (on platforms which have it) while
saving a crash dump.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bandan Das <bsd@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20151210014632.25437.43778.stgit@softrsSigned-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 7bbee5ca
...@@ -472,6 +472,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -472,6 +472,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Change the amount of debugging information output Change the amount of debugging information output
when initialising the APIC and IO-APIC components. when initialising the APIC and IO-APIC components.
apic_extnmi= [APIC,X86] External NMI delivery setting
Format: { bsp (default) | all | none }
bsp: External NMI is delivered only to CPU 0
all: External NMIs are broadcast to all CPUs as a
backup of CPU 0
none: External NMI is masked for all CPUs. This is
useful so that a dump capture kernel won't be
shot down by NMI
autoconf= [IPV6] autoconf= [IPV6]
See Documentation/networking/ipv6.txt. See Documentation/networking/ipv6.txt.
......
...@@ -23,6 +23,11 @@ ...@@ -23,6 +23,11 @@
#define APIC_VERBOSE 1 #define APIC_VERBOSE 1
#define APIC_DEBUG 2 #define APIC_DEBUG 2
/* Macros for apic_extnmi which controls external NMI masking */
#define APIC_EXTNMI_BSP 0 /* Default */
#define APIC_EXTNMI_ALL 1
#define APIC_EXTNMI_NONE 2
/* /*
* Define the default level of output to be very little * Define the default level of output to be very little
* This can be turned up by using apic=verbose for more * This can be turned up by using apic=verbose for more
......
...@@ -81,6 +81,12 @@ physid_mask_t phys_cpu_present_map; ...@@ -81,6 +81,12 @@ physid_mask_t phys_cpu_present_map;
*/ */
static unsigned int disabled_cpu_apicid __read_mostly = BAD_APICID; static unsigned int disabled_cpu_apicid __read_mostly = BAD_APICID;
/*
* This variable controls which CPUs receive external NMIs. By default,
* external NMIs are delivered only to the BSP.
*/
static int apic_extnmi = APIC_EXTNMI_BSP;
/* /*
* Map cpu index to physical APIC ID * Map cpu index to physical APIC ID
*/ */
...@@ -1161,6 +1167,8 @@ void __init init_bsp_APIC(void) ...@@ -1161,6 +1167,8 @@ void __init init_bsp_APIC(void)
value = APIC_DM_NMI; value = APIC_DM_NMI;
if (!lapic_is_integrated()) /* 82489DX */ if (!lapic_is_integrated()) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER; value |= APIC_LVT_LEVEL_TRIGGER;
if (apic_extnmi == APIC_EXTNMI_NONE)
value |= APIC_LVT_MASKED;
apic_write(APIC_LVT1, value); apic_write(APIC_LVT1, value);
} }
...@@ -1378,9 +1386,11 @@ void setup_local_APIC(void) ...@@ -1378,9 +1386,11 @@ void setup_local_APIC(void)
apic_write(APIC_LVT0, value); apic_write(APIC_LVT0, value);
/* /*
* only the BP should see the LINT1 NMI signal, obviously. * Only the BSP sees the LINT1 NMI signal by default. This can be
* modified by apic_extnmi= boot option.
*/ */
if (!cpu) if ((!cpu && apic_extnmi != APIC_EXTNMI_NONE) ||
apic_extnmi == APIC_EXTNMI_ALL)
value = APIC_DM_NMI; value = APIC_DM_NMI;
else else
value = APIC_DM_NMI | APIC_LVT_MASKED; value = APIC_DM_NMI | APIC_LVT_MASKED;
...@@ -2557,3 +2567,23 @@ static int __init apic_set_disabled_cpu_apicid(char *arg) ...@@ -2557,3 +2567,23 @@ static int __init apic_set_disabled_cpu_apicid(char *arg)
return 0; return 0;
} }
early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid); early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid);
static int __init apic_set_extnmi(char *arg)
{
if (!arg)
return -EINVAL;
if (!strncmp("all", arg, 3))
apic_extnmi = APIC_EXTNMI_ALL;
else if (!strncmp("none", arg, 4))
apic_extnmi = APIC_EXTNMI_NONE;
else if (!strncmp("bsp", arg, 3))
apic_extnmi = APIC_EXTNMI_BSP;
else {
pr_warn("Unknown external NMI delivery mode `%s' ignored\n", arg);
return -EINVAL;
}
return 0;
}
early_param("apic_extnmi", apic_set_extnmi);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册