提交 b71f6c40 编写于 作者: E Emil Tantilov 提交者: Jeff Kirsher

ixgbe: use link instead of I2C combined abstraction

Introduce ixgbe_link_operations struct with the following changes:

	read_i2c_combined		=> read_link
	read_i2c_combined_unlocked	=> read_link_unlocked
	write_i2c_combined		=> write_link
	write_i2c_combined_unlocked	=> write_link_unlocked

This will allow X550EM_a to override these methods for MDIO access
while X550EM_x provides methods to use I2C combined access. This
also adds a new structure, ixgbe_link_info, to hold information
about the link. Initially this is just method pointers and a bus
address.

The functions involved in combined I2C accesses were moved from
ixgbe_phy.c to ixgbe_x550.c. The underlying functions that carry
out the combined I2C accesses were left in ixgbe_phy.c because
they share some functions with other I2C methods.

v2 - set hw->link.ops in probe.
v3 - check ii->link_ops before setting it since we don't have it
for all devices.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 812d7dff
......@@ -9507,6 +9507,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw->mac.ops = *ii->mac_ops;
hw->mac.type = ii->mac;
hw->mvals = ii->mvals;
if (ii->link_ops)
hw->link.ops = *ii->link_ops;
/* EEPROM */
hw->eeprom.ops = *ii->eeprom_ops;
......
......@@ -109,7 +109,7 @@ static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
*
* Returns an error code on error.
*/
static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
......@@ -177,36 +177,6 @@ static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
return IXGBE_ERR_I2C;
}
/**
* ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to read from
* @reg: I2C device register to read from
* @val: pointer to location to receive read value
*
* Returns an error code on error.
*/
s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val)
{
return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
}
/**
* ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined
* @hw: pointer to the hardware structure
* @addr: I2C bus address to read from
* @reg: I2C device register to read from
* @val: pointer to location to receive read value
*
* Returns an error code on error.
*/
s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val)
{
return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
}
/**
* ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
* @hw: pointer to the hardware structure
......@@ -217,7 +187,7 @@ s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
*
* Returns an error code on error.
*/
static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
......@@ -272,36 +242,6 @@ static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
return IXGBE_ERR_I2C;
}
/**
* ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to write to
* @reg: I2C device register to write to
* @val: value to write
*
* Returns an error code on error.
*/
s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
u8 addr, u16 reg, u16 val)
{
return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
}
/**
* ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined
* @hw: pointer to the hardware structure
* @addr: I2C bus address to write to
* @reg: I2C device register to write to
* @val: value to write
*
* Returns an error code on error.
*/
s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
u8 addr, u16 reg, u16 val)
{
return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
}
/**
* ixgbe_identify_phy_generic - Get physical layer module
* @hw: pointer to hardware structure
......
......@@ -195,12 +195,8 @@ s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *sff8472_data);
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 eeprom_data);
s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val);
s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val);
s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 val);
s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 val);
s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *val, bool lock);
s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
u16 val, bool lock);
#endif /* _IXGBE_PHY_H_ */
......@@ -3396,16 +3396,28 @@ struct ixgbe_phy_operations {
s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
s32 (*check_overtemp)(struct ixgbe_hw *);
s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
s32 (*enter_lplu)(struct ixgbe_hw *);
s32 (*handle_lasi)(struct ixgbe_hw *hw);
s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *value);
s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 value);
s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
u8 *value);
s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
u8 value);
};
struct ixgbe_link_operations {
s32 (*read_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
s32 (*read_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *val);
s32 (*write_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
s32 (*write_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 val);
};
struct ixgbe_link_info {
struct ixgbe_link_operations ops;
u8 addr;
};
struct ixgbe_eeprom_info {
......@@ -3510,6 +3522,7 @@ struct ixgbe_hw {
struct ixgbe_addr_filter_info addr_ctrl;
struct ixgbe_fc_info fc;
struct ixgbe_phy_info phy;
struct ixgbe_link_info link;
struct ixgbe_eeprom_info eeprom;
struct ixgbe_bus_info bus;
struct ixgbe_mbx_info mbx;
......@@ -3533,6 +3546,7 @@ struct ixgbe_info {
const struct ixgbe_eeprom_operations *eeprom_ops;
const struct ixgbe_phy_operations *phy_ops;
const struct ixgbe_mbx_operations *mbx_ops;
const struct ixgbe_link_operations *link_ops;
const u32 *mvals;
};
......
......@@ -33,6 +33,23 @@ static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *);
static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *);
static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
struct ixgbe_link_info *link = &hw->link;
/* Start with X540 invariants, since so simular */
ixgbe_get_invariants_X540(hw);
if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
phy->ops.set_phy_power = NULL;
link->addr = IXGBE_CS4227;
return 0;
}
static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
......@@ -72,8 +89,7 @@ static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
*/
static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
{
return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
value);
return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value);
}
/**
......@@ -86,8 +102,7 @@ static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
*/
static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
{
return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
value);
return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value);
}
/**
......@@ -325,6 +340,68 @@ static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
return IXGBE_NOT_IMPLEMENTED;
}
/**
* ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to read from
* @reg: I2C device register to read from
* @val: pointer to location to receive read value
*
* Returns an error code on error.
**/
static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val)
{
return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
}
/**
* ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to read from
* @reg: I2C device register to read from
* @val: pointer to location to receive read value
*
* Returns an error code on error.
**/
static s32
ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val)
{
return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
}
/**
* ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to write to
* @reg: I2C device register to write to
* @val: value to write
*
* Returns an error code on error.
**/
static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
u8 addr, u16 reg, u16 val)
{
return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
}
/**
* ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to write to
* @reg: I2C device register to write to
* @val: value to write
*
* Returns an error code on error.
**/
static s32
ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
u8 addr, u16 reg, u16 val)
{
return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
}
/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
* @hw: pointer to hardware structure
*
......@@ -1338,8 +1415,10 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
else
reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
reg_slice, reg_val);
status = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
reg_val);
return status;
}
......@@ -3216,11 +3295,6 @@ static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
.identify = &ixgbe_identify_phy_x550em,
.read_reg = &ixgbe_read_phy_reg_generic,
.write_reg = &ixgbe_write_phy_reg_generic,
.read_i2c_combined = &ixgbe_read_i2c_combined_generic,
.write_i2c_combined = &ixgbe_write_i2c_combined_generic,
.read_i2c_combined_unlocked = &ixgbe_read_i2c_combined_generic_unlocked,
.write_i2c_combined_unlocked =
&ixgbe_write_i2c_combined_generic_unlocked,
};
static const struct ixgbe_phy_operations phy_ops_x550em_a = {
......@@ -3233,6 +3307,13 @@ static const struct ixgbe_phy_operations phy_ops_x550em_a = {
.write_reg_mdi = &ixgbe_write_phy_reg_mdi,
};
static const struct ixgbe_link_operations link_ops_x550em_x = {
.read_link = &ixgbe_read_i2c_combined_generic,
.read_link_unlocked = &ixgbe_read_i2c_combined_generic_unlocked,
.write_link = &ixgbe_write_i2c_combined_generic,
.write_link_unlocked = &ixgbe_write_i2c_combined_generic_unlocked,
};
static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
IXGBE_MVALS_INIT(X550)
};
......@@ -3263,11 +3344,12 @@ const struct ixgbe_info ixgbe_X550EM_x_info = {
.phy_ops = &phy_ops_X550EM_x,
.mbx_ops = &mbx_ops_generic,
.mvals = ixgbe_mvals_X550EM_x,
.link_ops = &link_ops_x550em_x,
};
const struct ixgbe_info ixgbe_x550em_a_info = {
.mac = ixgbe_mac_x550em_a,
.get_invariants = &ixgbe_get_invariants_X550_x,
.get_invariants = &ixgbe_get_invariants_X550_a,
.mac_ops = &mac_ops_x550em_a,
.eeprom_ops = &eeprom_ops_X550EM_x,
.phy_ops = &phy_ops_x550em_a,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册