From b690bdef7c4523bf55103b7a841c454d4674b315 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 13 Nov 2006 19:48:54 +0100 Subject: [PATCH] [PATCH] WAN: DSCC4 driver requires generic HDLC Another thing, reported recently to me by several people - DSCC4 WAN driver now (and perhaps for the last couple of years+) requires the generic HDLC. I've fixed the Kconfig and moved the DSCC4 option under CONFIG_HDLC so it's consistent visually. Signed-off-by: Krzysztof Halasa Signed-off-by: Jeff Garzik --- drivers/net/wan/Kconfig | 76 ++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index b5d0d7fb647a..d5ab9cf13257 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -57,44 +57,6 @@ config COSA The driver will be compiled as a module: the module will be called cosa. -config DSCC4 - tristate "Etinc PCISYNC serial board support" - depends on WAN && PCI && m - help - Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) - DSCC4 chipset. - - This is supposed to work with the four port card. Take a look at - for further information about the - driver. - - To compile this driver as a module, choose M here: the - module will be called dscc4. - -config DSCC4_PCISYNC - bool "Etinc PCISYNC features" - depends on DSCC4 - help - Due to Etinc's design choice for its PCISYNC cards, some operations - are only allowed on specific ports of the DSCC4. This option is the - only way for the driver to know that it shouldn't return a success - code for these operations. - - Please say Y if your card is an Etinc's PCISYNC. - -config DSCC4_PCI_RST - bool "Hard reset support" - depends on DSCC4 - help - Various DSCC4 bugs forbid any reliable software reset of the ASIC. - As a replacement, some vendors provide a way to assert the PCI #RST - pin of DSCC4 through the GPIO port of the card. If you choose Y, - the driver will make use of this feature before module removal - (i.e. rmmod). The feature is known to be available on Commtech's - cards. Contact your manufacturer for details. - - Say Y if your card supports this feature. - # # Lan Media's board. Currently 1000, 1200, 5200, 5245 # @@ -323,6 +285,44 @@ config FARSYNC To compile this driver as a module, choose M here: the module will be called farsync. +config DSCC4 + tristate "Etinc PCISYNC serial board support" + depends on HDLC && PCI && m + help + Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens) + DSCC4 chipset. + + This is supposed to work with the four port card. Take a look at + for further information about the + driver. + + To compile this driver as a module, choose M here: the + module will be called dscc4. + +config DSCC4_PCISYNC + bool "Etinc PCISYNC features" + depends on DSCC4 + help + Due to Etinc's design choice for its PCISYNC cards, some operations + are only allowed on specific ports of the DSCC4. This option is the + only way for the driver to know that it shouldn't return a success + code for these operations. + + Please say Y if your card is an Etinc's PCISYNC. + +config DSCC4_PCI_RST + bool "Hard reset support" + depends on DSCC4 + help + Various DSCC4 bugs forbid any reliable software reset of the ASIC. + As a replacement, some vendors provide a way to assert the PCI #RST + pin of DSCC4 through the GPIO port of the card. If you choose Y, + the driver will make use of this feature before module removal + (i.e. rmmod). The feature is known to be available on Commtech's + cards. Contact your manufacturer for details. + + Say Y if your card supports this feature. + config DLCI tristate "Frame Relay DLCI support" depends on WAN -- GitLab