From b0fe3306432796c8f7adbede8ccd479bb7b53d0a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 2 Apr 2016 00:05:14 -0700 Subject: [PATCH] i40e/i40evf: Clean up feature flags The feature flags list for i40e and i40evf is beginning to become pretty massive. I plan to add another 4 or so features to these drivers and duplicating the flags for each and every flags list is becoming a bit repetitive. The primary change here is that we now build our features list around hw_encap_features. After that we assign that to vlan_features, hw_features, and finally map that onto features. In addition we end up throwing features onto hw_encap_features that end up having no effect such as the Rx offloads and SCTP_CRC. However that should have no impact and makes things a bit easier for us as hw_encap_features is one of the less updated features maps available. For i40evf I went through and sanity checked a few features as well. Specifically RXCSUM was being set as a read-only feature which didn't make much sense. I have updated things so we can clear the NETIF_F_RXCSUM flag since that is really a software feature and not a hardware one anyway so disabling it is just a matter of ignoring the result from the hardware. Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 61 ++++++++--------- .../net/ethernet/intel/i40evf/i40evf_main.c | 66 +++++++++---------- 2 files changed, 58 insertions(+), 69 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 0b071cea305d..f2e83fe4d66c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -9111,40 +9111,36 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) np = netdev_priv(netdev); np->vsi = vsi; - netdev->hw_enc_features |= NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_TSO_ECN | - NETIF_F_GSO_GRE | - NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_GSO_UDP_TUNNEL_CSUM | + netdev->hw_enc_features |= NETIF_F_SG | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_HIGHDMA | + NETIF_F_SOFT_FEATURES | + NETIF_F_TSO | + NETIF_F_TSO_ECN | + NETIF_F_TSO6 | + NETIF_F_GSO_GRE | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_GSO_UDP_TUNNEL_CSUM | + NETIF_F_SCTP_CRC | + NETIF_F_RXHASH | + NETIF_F_RXCSUM | 0; - netdev->features = NETIF_F_SG | - NETIF_F_IP_CSUM | - NETIF_F_SCTP_CRC | - NETIF_F_HIGHDMA | - NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_GSO_GRE | - NETIF_F_HW_VLAN_CTAG_TX | - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_FILTER | - NETIF_F_IPV6_CSUM | - NETIF_F_TSO | - NETIF_F_TSO_ECN | - NETIF_F_TSO6 | - NETIF_F_RXCSUM | - NETIF_F_RXHASH | - 0; + if (!(pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE)) + netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM; + + /* record features VLANs can make use of */ + netdev->vlan_features |= netdev->hw_enc_features; if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) - netdev->features |= NETIF_F_NTUPLE; - if (pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE) - netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM; + netdev->hw_features |= NETIF_F_NTUPLE; + + netdev->hw_features |= netdev->hw_enc_features | + NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_CTAG_RX; - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; + netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; if (vsi->type == I40E_VSI_MAIN) { SET_NETDEV_DEV(netdev, &pf->pdev->dev); @@ -9183,12 +9179,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) ether_addr_copy(netdev->dev_addr, mac_addr); ether_addr_copy(netdev->perm_addr, mac_addr); - /* vlan gets same features (except vlan offload) - * after any tweaks for specific VSI types - */ - netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX | - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_FILTER); + netdev->priv_flags |= IFF_UNICAST_FLT; netdev->priv_flags |= IFF_SUPP_NOFCS; /* Setup netdev TC information */ diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 9110319a8f00..e3857d890cfb 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2337,40 +2337,38 @@ int i40evf_process_config(struct i40evf_adapter *adapter) return -ENODEV; } - netdev->features |= NETIF_F_HIGHDMA | - NETIF_F_SG | - NETIF_F_IP_CSUM | - NETIF_F_SCTP_CRC | - NETIF_F_IPV6_CSUM | - NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_TSO_ECN | - NETIF_F_GSO_GRE | - NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_RXCSUM | - NETIF_F_GRO; - - netdev->hw_enc_features |= NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_TSO_ECN | - NETIF_F_GSO_GRE | - NETIF_F_GSO_UDP_TUNNEL | - NETIF_F_GSO_UDP_TUNNEL_CSUM; - - if (adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE) - netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM; - - /* always clear VLAN features because they can change at every reset */ - netdev->features &= ~(I40EVF_VLAN_FEATURES); - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; - - if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN) { - netdev->vlan_features = netdev->features; - netdev->features |= I40EVF_VLAN_FEATURES; - } + netdev->hw_enc_features |= NETIF_F_SG | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_HIGHDMA | + NETIF_F_SOFT_FEATURES | + NETIF_F_TSO | + NETIF_F_TSO_ECN | + NETIF_F_TSO6 | + NETIF_F_GSO_GRE | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_GSO_UDP_TUNNEL_CSUM | + NETIF_F_SCTP_CRC | + NETIF_F_RXHASH | + NETIF_F_RXCSUM | + 0; + + if (!(adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE)) + netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM; + + /* record features VLANs can make use of */ + netdev->vlan_features |= netdev->hw_enc_features; + + /* Write features and hw_features separately to avoid polluting + * with, or dropping, features that are set when we registgered. + */ + netdev->hw_features |= netdev->hw_enc_features; + + netdev->features |= netdev->hw_enc_features | I40EVF_VLAN_FEATURES; + + /* disable VLAN features if not supported */ + if (!(vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN)) + netdev->features ^= I40EVF_VLAN_FEATURES; adapter->vsi.id = adapter->vsi_res->vsi_id; -- GitLab