From ac07bb73fe226ae2088f060c63829afddb3f2403 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 Sep 2009 14:04:41 -0300 Subject: [PATCH] V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed Currently, the logic to load ir i2c ancillary module is broken. It is associated to Hauppauge devices with IR flag on their eeprom, no matter if the device uses i2c or em28xx direct IR support. That's wrong. Instead, add a flag to the boards that use i2c IR chips and load the module only for those devices and if ir is not disabled. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 14 +++++++++----- drivers/media/video/em28xx/em28xx.h | 1 + 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c55634a674ba..a3d6d4ab9bc7 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -299,6 +299,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { @@ -318,6 +319,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_PINNACLE_USB_2] = { .name = "Pinnacle PCTV USB 2", .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { @@ -342,6 +344,7 @@ struct em28xx_board em28xx_boards[] = { TDA9887_PORT2_ACTIVE, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, + .has_ir_i2c = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -960,6 +963,7 @@ struct em28xx_board em28xx_boards[] = { [EM2800_BOARD_TERRATEC_CINERGY_200] = { .name = "Terratec Cinergy 200 USB", .is_em2800 = 1, + .has_ir_i2c = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, @@ -2277,7 +2281,7 @@ void em28xx_card_setup(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: { struct tveeprom tv; -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) && defined(MODULE) request_module("tveeprom"); #endif /* Call first TVeeprom */ @@ -2291,10 +2295,6 @@ void em28xx_card_setup(struct em28xx *dev) dev->i2s_speed = 2048000; dev->board.has_msp34xx = 1; } -#ifdef CONFIG_MODULES - if (tv.has_ir) - request_module("ir-kbd-i2c"); -#endif break; } case EM2882_BOARD_KWORLD_ATSC_315U: @@ -2335,6 +2335,10 @@ void em28xx_card_setup(struct em28xx *dev) break; } +#if defined(CONFIG_MODULES) && defined(MODULE) + if (dev->board.has_ir_i2c && !disable_ir) + request_module("ir-kbd-i2c"); +#endif if (dev->board.has_snapshot_button) em28xx_register_snapshot_button(dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index bc825bdd65be..0f2ba9a40d17 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -399,6 +399,7 @@ struct em28xx_board { unsigned int has_snapshot_button:1; unsigned int is_webcam:1; unsigned int valid:1; + unsigned int has_ir_i2c:1; unsigned char xclk, i2c_speed; unsigned char radio_addr; -- GitLab