From a7c2ce38a5e31471bc41966e672aea69ffc7061b Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 16 Jan 2020 12:19:01 +0800 Subject: [PATCH] net: phy: dp83867: enable robust auto-mdix [ Upstream commit 5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 ] The link detection timeouts can be observed (or link might not be detected at all) when dp83867 PHY is configured in manual mode (speed/duplex). CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection in case dp83867 is configured in manual mode and reduce link detection time. As per DM: "If link partners are configured to operational modes that are not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force 100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock." Hence, enable this option by default as there are no known reasons not to do so. Signed-off-by: Grygorii Strashko Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Yang Yingliang --- drivers/net/phy/dp83867.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index eeadfde15940..879096d3ff41 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -86,6 +86,10 @@ #define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8) #define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8 +/* CFG3 bits */ +#define DP83867_CFG3_INT_OE BIT(7) +#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9) + /* CFG4 bits */ #define DP83867_CFG4_PORT_MIRROR_EN BIT(0) @@ -331,12 +335,13 @@ static int dp83867_config_init(struct phy_device *phydev) return ret; } + val = phy_read(phydev, DP83867_CFG3); /* Enable Interrupt output INT_OE in CFG3 register */ - if (phy_interrupt_is_valid(phydev)) { - val = phy_read(phydev, DP83867_CFG3); - val |= BIT(7); - phy_write(phydev, DP83867_CFG3, val); - } + if (phy_interrupt_is_valid(phydev)) + val |= DP83867_CFG3_INT_OE; + + val |= DP83867_CFG3_ROBUST_AUTO_MDIX; + phy_write(phydev, DP83867_CFG3, val); if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP) dp83867_config_port_mirroring(phydev); -- GitLab