au1xxx-ide: remove dead code

'speed' is always equal to 'mode' when ide_config_drive_speed() is called
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 572543d8
...@@ -181,12 +181,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed) ...@@ -181,12 +181,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
{ {
int mem_sttime; int mem_sttime;
int mem_stcfg; int mem_stcfg;
unsigned long mode;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
if (ide_use_dma(drive))
mode = ide_dma_speed(drive, 0);
#endif
mem_sttime = 0; mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2); mem_stcfg = au_readl(MEM_STCFG2);
...@@ -207,7 +201,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed) ...@@ -207,7 +201,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
mem_stcfg &= ~TOECS_MASK; mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
mode = XFER_MW_DMA_2;
break; break;
case XFER_MW_DMA_1: case XFER_MW_DMA_1:
mem_sttime = SBC_IDE_TIMING(MDMA1); mem_sttime = SBC_IDE_TIMING(MDMA1);
...@@ -218,7 +211,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed) ...@@ -218,7 +211,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
mem_stcfg &= ~TOECS_MASK; mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
mode = XFER_MW_DMA_1;
break; break;
case XFER_MW_DMA_0: case XFER_MW_DMA_0:
mem_sttime = SBC_IDE_TIMING(MDMA0); mem_sttime = SBC_IDE_TIMING(MDMA0);
...@@ -229,14 +221,13 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed) ...@@ -229,14 +221,13 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
mem_stcfg &= ~TOECS_MASK; mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
mode = XFER_MW_DMA_0;
break; break;
#endif #endif
default: default:
return 1; return 1;
} }
if (ide_config_drive_speed(drive, mode)) if (ide_config_drive_speed(drive, speed))
return 1; return 1;
au_writel(mem_sttime,MEM_STTIME2); au_writel(mem_sttime,MEM_STTIME2);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册