From a32826e4aefa905b392d2d862d51365d50d4829b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 6 Sep 2012 17:47:33 -0600 Subject: [PATCH] ASoC: tegra: fix maxburst settings in dmaengine code The I2S controllers are programmed with an "attention" level of 4 DWORDs. This must match the configuration passed to the DMA driver, so that when they burst in data, they don't overflow the available FIFO space. Also, the burst size is relevant to the destination for playback, and source for capture, not vice-versa as originally written. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/tegra/tegra_pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c index 5658bcec1931..8d6900c1ee47 100644 --- a/sound/soc/tegra/tegra_pcm.c +++ b/sound/soc/tegra/tegra_pcm.c @@ -334,11 +334,11 @@ static int tegra_pcm_hw_params(struct snd_pcm_substream *substream, if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.dst_addr = dmap->addr; - slave_config.src_maxburst = 0; + slave_config.dst_maxburst = 4; } else { slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.src_addr = dmap->addr; - slave_config.dst_maxburst = 0; + slave_config.src_maxburst = 4; } slave_config.slave_id = dmap->req_sel; -- GitLab