diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 03497909539e7859d460b131c46c6e853af5e48a..8debdd625e1a151eff1f020ac31dd4369e0d15f3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -449,12 +449,6 @@ Who: Alok N Kataria ---------------------------- -What: adt7473 hardware monitoring driver -When: February 2010 -Why: Obsoleted by the adt7475 driver. -Who: Jean Delvare - ---------------------------- What: Support for lcd_switch and display_get in asus-laptop driver When: March 2010 Why: These two features use non-standard interfaces. There are the diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 deleted file mode 100644 index 446612bd1fb983510dc67f2bbef51d2ee775b31d..0000000000000000000000000000000000000000 --- a/Documentation/hwmon/adt7473 +++ /dev/null @@ -1,74 +0,0 @@ -Kernel driver adt7473 -====================== - -Supported chips: - * Analog Devices ADT7473 - Prefix: 'adt7473' - Addresses scanned: I2C 0x2C, 0x2D, 0x2E - Datasheet: Publicly available at the Analog Devices website - -Author: Darrick J. Wong - -This driver is depreacted, please use the adt7475 driver instead. - -Description ------------ - -This driver implements support for the Analog Devices ADT7473 chip family. - -The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 -specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has four (4) 16-bit counters for -measuring fan speed. There are three (3) PWM outputs that can be used -to control fan speed. - -A sophisticated control system for the PWM outputs is designed into the -ADT7473 that allows fan speed to be adjusted automatically based on any of the -three temperature sensors. Each PWM output is individually adjustable and -programmable. Once configured, the ADT7473 will adjust the PWM outputs in -response to the measured temperatures without further host intervention. -This feature can also be disabled for manual control of the PWM's. - -Each of the measured inputs (voltage, temperature, fan speed) has -corresponding high/low limit values. The ADT7473 will signal an ALARM if -any measured value exceeds either limit. - -The ADT7473 samples all inputs continuously. The driver will not read -the registers more often than once every other second. Further, -configuration data is only read once per minute. - -Special Features ----------------- - -The ADT7473 have a 10-bit ADC and can therefore measure temperatures -with 0.25 degC resolution. Temperature readings can be configured either -for twos complement format or "Offset 64" format, wherein 63 is subtracted -from the raw value to get the temperature value. - -The Analog Devices datasheet is very detailed and describes a procedure for -determining an optimal configuration for the automatic PWM control. - -Configuration Notes -------------------- - -Besides standard interfaces driver adds the following: - -* PWM Control - -* pwm#_auto_point1_pwm and temp#_auto_point1_temp and -* pwm#_auto_point2_pwm and temp#_auto_point2_temp - - -point1: Set the pwm speed at a lower temperature bound. -point2: Set the pwm speed at a higher temperature bound. - -The ADT7473 will scale the pwm between the lower and higher pwm speed when -the temperature is between the two temperature boundaries. PWM values range -from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the -temperature sensor associated with the PWM control exceeds temp#_max. - -Notes ------ - -The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus. -Unfortunately, they fail to set the i2c adapter class, so this driver may -fail to find the chip until the nvidia driver is patched. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b6d65aa2082537fc25e50ce6c7ee2fd08583620d..e4595e6147b420de2a4545d45e498d5d5e886ba4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -200,20 +200,6 @@ config SENSORS_ADT7470 This driver can also be built as a module. If so, the module will be called adt7470. -config SENSORS_ADT7473 - tristate "Analog Devices ADT7473 (DEPRECATED)" - depends on I2C && EXPERIMENTAL - select SENSORS_ADT7475 - help - If you say yes here you get support for the Analog Devices - ADT7473 temperature monitoring chips. - - This driver is deprecated, you should use the adt7475 driver - instead. - - This driver can also be built as a module. If so, the module - will be called adt7473. - config SENSORS_ADT7475 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 865da80f2b906bbca2ee033c65a0925b7ed6fd1b..4aa1a3d112ad99a3894a75a558b5d85049805f69 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o -obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_AMS) += ams/ diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c deleted file mode 100644 index 434576f61c84b7572575ceb26f698b23f1fece40..0000000000000000000000000000000000000000 --- a/drivers/hwmon/adt7473.c +++ /dev/null @@ -1,1180 +0,0 @@ -/* - * A hwmon driver for the Analog Devices ADT7473 - * Copyright (C) 2007 IBM - * - * Author: Darrick J. Wong - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END }; - -/* ADT7473 registers */ -#define ADT7473_REG_BASE_ADDR 0x20 - -#define ADT7473_REG_VOLT_BASE_ADDR 0x21 -#define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46 - -#define ADT7473_REG_TEMP_BASE_ADDR 0x25 -#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E -#define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67 -#define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A - -#define ADT7473_REG_FAN_BASE_ADDR 0x28 -#define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54 - -#define ADT7473_REG_PWM_BASE_ADDR 0x30 -#define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64 -#define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38 -#define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C -#define ADT7473_PWM_BHVR_MASK 0xE0 -#define ADT7473_PWM_BHVR_SHIFT 5 - -#define ADT7473_REG_CFG1 0x40 -#define ADT7473_CFG1_START 0x01 -#define ADT7473_CFG1_READY 0x04 -#define ADT7473_REG_CFG2 0x73 -#define ADT7473_REG_CFG3 0x78 -#define ADT7473_REG_CFG4 0x7D -#define ADT7473_CFG4_MAX_DUTY_AT_OVT 0x08 -#define ADT7473_REG_CFG5 0x7C -#define ADT7473_CFG5_TEMP_TWOS 0x01 -#define ADT7473_CFG5_TEMP_OFFSET 0x02 - -#define ADT7473_REG_DEVICE 0x3D -#define ADT7473_VENDOR 0x41 -#define ADT7473_REG_VENDOR 0x3E -#define ADT7473_DEVICE 0x73 -#define ADT7473_REG_REVISION 0x3F -#define ADT7473_REV_68 0x68 -#define ADT7473_REV_69 0x69 - -#define ADT7473_REG_ALARM1 0x41 -#define ADT7473_VCCP_ALARM 0x02 -#define ADT7473_VCC_ALARM 0x04 -#define ADT7473_R1T_ALARM 0x10 -#define ADT7473_LT_ALARM 0x20 -#define ADT7473_R2T_ALARM 0x40 -#define ADT7473_OOL 0x80 -#define ADT7473_REG_ALARM2 0x42 -#define ADT7473_OVT_ALARM 0x02 -#define ADT7473_FAN1_ALARM 0x04 -#define ADT7473_FAN2_ALARM 0x08 -#define ADT7473_FAN3_ALARM 0x10 -#define ADT7473_FAN4_ALARM 0x20 -#define ADT7473_R1T_SHORT 0x40 -#define ADT7473_R2T_SHORT 0x80 - -#define ALARM2(x) ((x) << 8) - -#define ADT7473_VOLT_COUNT 2 -#define ADT7473_REG_VOLT(x) (ADT7473_REG_VOLT_BASE_ADDR + (x)) -#define ADT7473_REG_VOLT_MIN(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2)) -#define ADT7473_REG_VOLT_MAX(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + \ - ((x) * 2) + 1) - -#define ADT7473_TEMP_COUNT 3 -#define ADT7473_REG_TEMP(x) (ADT7473_REG_TEMP_BASE_ADDR + (x)) -#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2)) -#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \ - ((x) * 2) + 1) -#define ADT7473_REG_TEMP_TMIN(x) (ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x)) -#define ADT7473_REG_TEMP_TMAX(x) (ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x)) - -#define ADT7473_FAN_COUNT 4 -#define ADT7473_REG_FAN(x) (ADT7473_REG_FAN_BASE_ADDR + ((x) * 2)) -#define ADT7473_REG_FAN_MIN(x) (ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2)) - -#define ADT7473_PWM_COUNT 3 -#define ADT7473_REG_PWM(x) (ADT7473_REG_PWM_BASE_ADDR + (x)) -#define ADT7473_REG_PWM_MAX(x) (ADT7473_REG_PWM_MAX_BASE_ADDR + (x)) -#define ADT7473_REG_PWM_MIN(x) (ADT7473_REG_PWM_MIN_BASE_ADDR + (x)) -#define ADT7473_REG_PWM_BHVR(x) (ADT7473_REG_PWM_BHVR_BASE_ADDR + (x)) - -/* How often do we reread sensors values? (In jiffies) */ -#define SENSOR_REFRESH_INTERVAL (2 * HZ) - -/* How often do we reread sensor limit values? (In jiffies) */ -#define LIMIT_REFRESH_INTERVAL (60 * HZ) - -/* datasheet says to divide this number by the fan reading to get fan rpm */ -#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) -#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM -#define FAN_PERIOD_INVALID 65535 -#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) - -struct adt7473_data { - struct device *hwmon_dev; - struct attribute_group attrs; - struct mutex lock; - char sensors_valid; - char limits_valid; - unsigned long sensors_last_updated; /* In jiffies */ - unsigned long limits_last_updated; /* In jiffies */ - - u8 volt[ADT7473_VOLT_COUNT]; - s8 volt_min[ADT7473_VOLT_COUNT]; - s8 volt_max[ADT7473_VOLT_COUNT]; - - s8 temp[ADT7473_TEMP_COUNT]; - s8 temp_min[ADT7473_TEMP_COUNT]; - s8 temp_max[ADT7473_TEMP_COUNT]; - s8 temp_tmin[ADT7473_TEMP_COUNT]; - /* This is called the !THERM limit in the datasheet */ - s8 temp_tmax[ADT7473_TEMP_COUNT]; - - u16 fan[ADT7473_FAN_COUNT]; - u16 fan_min[ADT7473_FAN_COUNT]; - - u8 pwm[ADT7473_PWM_COUNT]; - u8 pwm_max[ADT7473_PWM_COUNT]; - u8 pwm_min[ADT7473_PWM_COUNT]; - u8 pwm_behavior[ADT7473_PWM_COUNT]; - - u8 temp_twos_complement; - u8 temp_offset; - - u16 alarm; - u8 max_duty_at_overheat; -}; - -static int adt7473_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int adt7473_detect(struct i2c_client *client, - struct i2c_board_info *info); -static int adt7473_remove(struct i2c_client *client); - -static const struct i2c_device_id adt7473_id[] = { - { "adt7473", 0 }, - { } -}; - -static struct i2c_driver adt7473_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "adt7473", - }, - .probe = adt7473_probe, - .remove = adt7473_remove, - .id_table = adt7473_id, - .detect = adt7473_detect, - .address_list = normal_i2c, -}; - -/* - * 16-bit registers on the ADT7473 are low-byte first. The data sheet says - * that the low byte must be read before the high byte. - */ -static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg) -{ - u16 foo; - foo = i2c_smbus_read_byte_data(client, reg); - foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); - return foo; -} - -static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg, - u16 value) -{ - return i2c_smbus_write_byte_data(client, reg, value & 0xFF) - && i2c_smbus_write_byte_data(client, reg + 1, value >> 8); -} - -static void adt7473_init_client(struct i2c_client *client) -{ - int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1); - - if (!(reg & ADT7473_CFG1_READY)) { - dev_err(&client->dev, "Chip not ready.\n"); - } else { - /* start monitoring */ - i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1, - reg | ADT7473_CFG1_START); - } -} - -static struct adt7473_data *adt7473_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - unsigned long local_jiffies = jiffies; - u8 cfg; - int i; - - mutex_lock(&data->lock); - if (time_before(local_jiffies, data->sensors_last_updated + - SENSOR_REFRESH_INTERVAL) - && data->sensors_valid) - goto no_sensor_update; - - for (i = 0; i < ADT7473_VOLT_COUNT; i++) - data->volt[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_VOLT(i)); - - /* Determine temperature encoding */ - cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5); - data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS); - - /* - * What does this do? it implies a variable temperature sensor - * offset, but the datasheet doesn't say anything about this bit - * and other parts of the datasheet imply that "offset64" mode - * means that you shift temp values by -64 if the above bit was set. - */ - data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET); - - for (i = 0; i < ADT7473_TEMP_COUNT; i++) - data->temp[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_TEMP(i)); - - for (i = 0; i < ADT7473_FAN_COUNT; i++) - data->fan[i] = adt7473_read_word_data(client, - ADT7473_REG_FAN(i)); - - for (i = 0; i < ADT7473_PWM_COUNT; i++) - data->pwm[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM(i)); - - data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1); - if (data->alarm & ADT7473_OOL) - data->alarm |= ALARM2(i2c_smbus_read_byte_data(client, - ADT7473_REG_ALARM2)); - - data->sensors_last_updated = local_jiffies; - data->sensors_valid = 1; - -no_sensor_update: - if (time_before(local_jiffies, data->limits_last_updated + - LIMIT_REFRESH_INTERVAL) - && data->limits_valid) - goto out; - - for (i = 0; i < ADT7473_VOLT_COUNT; i++) { - data->volt_min[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_VOLT_MIN(i)); - data->volt_max[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_VOLT_MAX(i)); - } - - for (i = 0; i < ADT7473_TEMP_COUNT; i++) { - data->temp_min[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_TEMP_MIN(i)); - data->temp_max[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_TEMP_MAX(i)); - data->temp_tmin[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_TEMP_TMIN(i)); - data->temp_tmax[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_TEMP_TMAX(i)); - } - - for (i = 0; i < ADT7473_FAN_COUNT; i++) - data->fan_min[i] = adt7473_read_word_data(client, - ADT7473_REG_FAN_MIN(i)); - - for (i = 0; i < ADT7473_PWM_COUNT; i++) { - data->pwm_max[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM_MAX(i)); - data->pwm_min[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM_MIN(i)); - data->pwm_behavior[i] = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM_BHVR(i)); - } - - i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); - data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); - - data->limits_last_updated = local_jiffies; - data->limits_valid = 1; - -out: - mutex_unlock(&data->lock); - return data; -} - -/* - * Conversions - */ - -/* IN are scaled acording to built-in resistors */ -static const int adt7473_scaling[] = { /* .001 Volts */ - 2250, 3300 -}; -#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) - -static int decode_volt(int volt_index, u8 raw) -{ - return SCALE(raw, 192, adt7473_scaling[volt_index]); -} - -static u8 encode_volt(int volt_index, int cooked) -{ - int raw = SCALE(cooked, adt7473_scaling[volt_index], 192); - return SENSORS_LIMIT(raw, 0, 255); -} - -static ssize_t show_volt_min(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - decode_volt(attr->index, data->volt_min[attr->index])); -} - -static ssize_t set_volt_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long volt; - - if (strict_strtol(buf, 10, &volt)) - return -EINVAL; - - volt = encode_volt(attr->index, volt); - - mutex_lock(&data->lock); - data->volt_min[attr->index] = volt; - i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index), - volt); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_volt_max(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - decode_volt(attr->index, data->volt_max[attr->index])); -} - -static ssize_t set_volt_max(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long volt; - - if (strict_strtol(buf, 10, &volt)) - return -EINVAL; - - volt = encode_volt(attr->index, volt); - - mutex_lock(&data->lock); - data->volt_max[attr->index] = volt; - i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index), - volt); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_volt(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - - return sprintf(buf, "%d\n", - decode_volt(attr->index, data->volt[attr->index])); -} - -/* - * This chip can report temperature data either as a two's complement - * number in the range -128 to 127, or as an unsigned number that must - * be offset by 64. - */ -static int decode_temp(u8 twos_complement, u8 raw) -{ - return twos_complement ? (s8)raw : raw - 64; -} - -static u8 encode_temp(u8 twos_complement, int cooked) -{ - u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; - return SENSORS_LIMIT(ret, 0, 255); -} - -static ssize_t show_temp_min(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", 1000 * decode_temp( - data->temp_twos_complement, - data->temp_min[attr->index])); -} - -static ssize_t set_temp_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = encode_temp(data->temp_twos_complement, temp); - - mutex_lock(&data->lock); - data->temp_min[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_temp_max(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", 1000 * decode_temp( - data->temp_twos_complement, - data->temp_max[attr->index])); -} - -static ssize_t set_temp_max(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = encode_temp(data->temp_twos_complement, temp); - - mutex_lock(&data->lock); - data->temp_max[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", 1000 * decode_temp( - data->temp_twos_complement, - data->temp[attr->index])); -} - -static ssize_t show_fan_min(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - - if (FAN_DATA_VALID(data->fan_min[attr->index])) - return sprintf(buf, "%d\n", - FAN_PERIOD_TO_RPM(data->fan_min[attr->index])); - else - return sprintf(buf, "0\n"); -} - -static ssize_t set_fan_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp) || !temp) - return -EINVAL; - - temp = FAN_RPM_TO_PERIOD(temp); - temp = SENSORS_LIMIT(temp, 1, 65534); - - mutex_lock(&data->lock); - data->fan_min[attr->index] = temp; - adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - - if (FAN_DATA_VALID(data->fan[attr->index])) - return sprintf(buf, "%d\n", - FAN_PERIOD_TO_RPM(data->fan[attr->index])); - else - return sprintf(buf, "0\n"); -} - -static ssize_t show_max_duty_at_crit(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", data->max_duty_at_overheat); -} - -static ssize_t set_max_duty_at_crit(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - u8 reg; - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - mutex_lock(&data->lock); - data->max_duty_at_overheat = !!temp; - reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); - if (temp) - reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT; - else - reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT; - i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", data->pwm[attr->index]); -} - -static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = SENSORS_LIMIT(temp, 0, 255); - - mutex_lock(&data->lock); - data->pwm[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_pwm_max(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", data->pwm_max[attr->index]); -} - -static ssize_t set_pwm_max(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = SENSORS_LIMIT(temp, 0, 255); - - mutex_lock(&data->lock); - data->pwm_max[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_pwm_min(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", data->pwm_min[attr->index]); -} - -static ssize_t set_pwm_min(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = SENSORS_LIMIT(temp, 0, 255); - - mutex_lock(&data->lock); - data->pwm_min[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_temp_tmax(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", 1000 * decode_temp( - data->temp_twos_complement, - data->temp_tmax[attr->index])); -} - -static ssize_t set_temp_tmax(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = encode_temp(data->temp_twos_complement, temp); - - mutex_lock(&data->lock); - data->temp_tmax[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_temp_tmin(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", 1000 * decode_temp( - data->temp_twos_complement, - data->temp_tmin[attr->index])); -} - -static ssize_t set_temp_tmin(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = encode_temp(data->temp_twos_complement, temp); - - mutex_lock(&data->lock); - data->temp_tmin[attr->index] = temp; - i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index), - temp); - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_pwm_enable(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - - switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) { - case 3: - return sprintf(buf, "0\n"); - case 7: - return sprintf(buf, "1\n"); - default: - return sprintf(buf, "2\n"); - } -} - -static ssize_t set_pwm_enable(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - u8 reg; - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - switch (temp) { - case 0: - temp = 3; - break; - case 1: - temp = 7; - break; - case 2: - /* Enter automatic mode with fans off */ - temp = 4; - break; - default: - return -EINVAL; - } - - mutex_lock(&data->lock); - reg = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM_BHVR(attr->index)); - reg = (temp << ADT7473_PWM_BHVR_SHIFT) | - (reg & ~ADT7473_PWM_BHVR_MASK); - i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), - reg); - data->pwm_behavior[attr->index] = reg; - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_pwm_auto_temp(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT; - - switch (bhvr) { - case 3: - case 4: - case 7: - return sprintf(buf, "0\n"); - case 0: - case 1: - case 5: - case 6: - return sprintf(buf, "%d\n", bhvr + 1); - case 2: - return sprintf(buf, "4\n"); - } - /* shouldn't ever get here */ - BUG(); -} - -static ssize_t set_pwm_auto_temp(struct device *dev, - struct device_attribute *devattr, - const char *buf, - size_t count) -{ - u8 reg; - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct adt7473_data *data = i2c_get_clientdata(client); - long temp; - - if (strict_strtol(buf, 10, &temp)) - return -EINVAL; - - switch (temp) { - case 1: - case 2: - case 6: - case 7: - temp--; - break; - case 0: - temp = 4; - break; - default: - return -EINVAL; - } - - mutex_lock(&data->lock); - reg = i2c_smbus_read_byte_data(client, - ADT7473_REG_PWM_BHVR(attr->index)); - reg = (temp << ADT7473_PWM_BHVR_SHIFT) | - (reg & ~ADT7473_PWM_BHVR_MASK); - i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index), - reg); - data->pwm_behavior[attr->index] = reg; - mutex_unlock(&data->lock); - - return count; -} - -static ssize_t show_alarm(struct device *dev, - struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct adt7473_data *data = adt7473_update_device(dev); - - if (data->alarm & attr->index) - return sprintf(buf, "1\n"); - else - return sprintf(buf, "0\n"); -} - - -static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, - set_volt_max, 0); -static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, - set_volt_max, 1); - -static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, - set_volt_min, 0); -static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, - set_volt_min, 1); - -static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0); -static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1); - -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, - ADT7473_VCCP_ALARM); -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, - ADT7473_VCC_ALARM); - -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, - set_temp_max, 0); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, - set_temp_max, 1); -static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, - set_temp_max, 2); - -static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, - set_temp_min, 0); -static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, - set_temp_min, 1); -static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, - set_temp_min, 2); - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); -static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); - -static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, - ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT)); -static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, - ADT7473_LT_ALARM); -static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, - ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT)); - -static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, - set_fan_min, 0); -static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, - set_fan_min, 1); -static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, - set_fan_min, 2); -static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, - set_fan_min, 3); - -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); -static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); -static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); - -static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, - ALARM2(ADT7473_FAN1_ALARM)); -static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, - ALARM2(ADT7473_FAN2_ALARM)); -static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, - ALARM2(ADT7473_FAN3_ALARM)); -static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, - ALARM2(ADT7473_FAN4_ALARM)); - -static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO, - show_max_duty_at_crit, set_max_duty_at_crit, 0); - -static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); -static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); -static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); - -static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, - show_pwm_min, set_pwm_min, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, - show_pwm_min, set_pwm_min, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, - show_pwm_min, set_pwm_min, 2); - -static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, - show_pwm_max, set_pwm_max, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, - show_pwm_max, set_pwm_max, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, - show_pwm_max, set_pwm_max, 2); - -static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, - show_temp_tmin, set_temp_tmin, 0); -static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, - show_temp_tmin, set_temp_tmin, 1); -static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, - show_temp_tmin, set_temp_tmin, 2); - -static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, - show_temp_tmax, set_temp_tmax, 0); -static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, - show_temp_tmax, set_temp_tmax, 1); -static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, - show_temp_tmax, set_temp_tmax, 2); - -static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, - set_pwm_enable, 0); -static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, - set_pwm_enable, 1); -static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, - set_pwm_enable, 2); - -static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, - show_pwm_auto_temp, set_pwm_auto_temp, 0); -static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, - show_pwm_auto_temp, set_pwm_auto_temp, 1); -static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, - show_pwm_auto_temp, set_pwm_auto_temp, 2); - -static struct attribute *adt7473_attr[] = -{ - &sensor_dev_attr_in1_max.dev_attr.attr, - &sensor_dev_attr_in2_max.dev_attr.attr, - &sensor_dev_attr_in1_min.dev_attr.attr, - &sensor_dev_attr_in2_min.dev_attr.attr, - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in1_alarm.dev_attr.attr, - &sensor_dev_attr_in2_alarm.dev_attr.attr, - - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp2_max.dev_attr.attr, - &sensor_dev_attr_temp3_max.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp2_min.dev_attr.attr, - &sensor_dev_attr_temp3_min.dev_attr.attr, - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp2_input.dev_attr.attr, - &sensor_dev_attr_temp3_input.dev_attr.attr, - &sensor_dev_attr_temp1_alarm.dev_attr.attr, - &sensor_dev_attr_temp2_alarm.dev_attr.attr, - &sensor_dev_attr_temp3_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, - &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, - &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, - - &sensor_dev_attr_fan1_min.dev_attr.attr, - &sensor_dev_attr_fan2_min.dev_attr.attr, - &sensor_dev_attr_fan3_min.dev_attr.attr, - &sensor_dev_attr_fan4_min.dev_attr.attr, - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan2_input.dev_attr.attr, - &sensor_dev_attr_fan3_input.dev_attr.attr, - &sensor_dev_attr_fan4_input.dev_attr.attr, - &sensor_dev_attr_fan1_alarm.dev_attr.attr, - &sensor_dev_attr_fan2_alarm.dev_attr.attr, - &sensor_dev_attr_fan3_alarm.dev_attr.attr, - &sensor_dev_attr_fan4_alarm.dev_attr.attr, - - &sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr, - - &sensor_dev_attr_pwm1.dev_attr.attr, - &sensor_dev_attr_pwm2.dev_attr.attr, - &sensor_dev_attr_pwm3.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, - - &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm3_enable.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, - - NULL -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int adt7473_detect(struct i2c_client *client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - int vendor, device, revision; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); - if (vendor != ADT7473_VENDOR) - return -ENODEV; - - device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); - if (device != ADT7473_DEVICE) - return -ENODEV; - - revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION); - if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) - return -ENODEV; - - strlcpy(info->type, "adt7473", I2C_NAME_SIZE); - - return 0; -} - -static int adt7473_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct adt7473_data *data; - int err; - - data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(client, data); - mutex_init(&data->lock); - - dev_info(&client->dev, "%s chip found\n", client->name); - - /* Initialize the ADT7473 chip */ - adt7473_init_client(client); - - /* Register sysfs hooks */ - data->attrs.attrs = adt7473_attr; - err = sysfs_create_group(&client->dev.kobj, &data->attrs); - if (err) - goto exit_free; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - - return 0; - -exit_remove: - sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_free: - kfree(data); -exit: - return err; -} - -static int adt7473_remove(struct i2c_client *client) -{ - struct adt7473_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &data->attrs); - kfree(data); - return 0; -} - -static int __init adt7473_init(void) -{ - pr_notice("The adt7473 driver is deprecated, please use the adt7475 " - "driver instead\n"); - return i2c_add_driver(&adt7473_driver); -} - -static void __exit adt7473_exit(void) -{ - i2c_del_driver(&adt7473_driver); -} - -MODULE_AUTHOR("Darrick J. Wong "); -MODULE_DESCRIPTION("ADT7473 driver"); -MODULE_LICENSE("GPL"); - -module_init(adt7473_init); -module_exit(adt7473_exit);