From a082381044ce026e83dbd17f8837722b028fc07d Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 30 Apr 2009 15:55:44 -0400 Subject: [PATCH] ath5k: Allow user/driver to set txpower * Now that we have regulatory control enable the driver to set txpower on hw * Also use txpower table offset so that we can match power range set by user/driver with indices on power table. Tested 2 different cards (a CM9 and an RF5112-based ubnt) and got the same output using a remote machine to measure per-packet rssi (conected the cards using attenuators). I also switched between various tx power levels and i saw an equal power change on the remote machine (so txpower changes as expected) and verified that we have the same output on each rate. Signed-off-by: Nick Kossifidis Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ath5k.h | 7 ++-- drivers/net/wireless/ath/ath5k/base.c | 11 ++++++- drivers/net/wireless/ath/ath5k/phy.c | 45 +++++++++++++++++++++----- drivers/net/wireless/ath/ath5k/reset.c | 2 +- 4 files changed, 52 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 60c6d2edc4b9..04b73453f6a5 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1100,11 +1100,12 @@ struct ath5k_hw { /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; + /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; - /* Values in dB units */ - s16 txp_cck_ofdm_pwr_delta; s16 txp_cck_ofdm_gainf_delta; + /* Value in dB units */ + s16 txp_cck_ofdm_pwr_delta; } ah_txpower; struct { @@ -1271,7 +1272,7 @@ extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); /* * Functions used internaly diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 7b80cebffd41..d70856a9520e 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2747,12 +2747,21 @@ static int ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; struct ieee80211_conf *conf = &hw->conf; int ret; mutex_lock(&sc->lock); - sc->power_level = conf->power_level; + sc->bintval = conf->beacon_int; + + if ((changed & IEEE80211_CONF_CHANGE_POWER) && + (sc->power_level != conf->power_level)) { + sc->power_level = conf->power_level; + + /* Half dB steps */ + ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); + } ret = ath5k_chan_set(sc, conf->channel); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index b48b29dca3d2..bb61b8e2dce9 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. * - * TODO: Use propper tx power setting for the probe packet so - * that we don't observe a serious power drop on the receiver - * * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) * just after we enable the probe so that we don't mess with * standard traffic ? Maybe it's time to use sw interrupts and @@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) /* Send the packet with 2dB below max power as * patent doc suggest */ - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4, + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4, AR5K_PHY_PAPD_PROBE_TXPOWER) | AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); @@ -2482,8 +2479,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; - ah->ah_txpower.txp_min_pwr = rates[7]; - ah->ah_txpower.txp_max_pwr = rates[0]; + /* Now that we have all rates setup use table offset to + * match the power range set by user with the power indices + * on PCDAC/PDADC table */ + for (i = 0; i < 16; i++) { + rates[i] += ah->ah_txpower.txp_offset; + /* Don't get out of bounds */ + if (rates[i] > 63) + rates[i] = 63; + } + + /* Min/max in 0.25dB units */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_max_pwr = 2 * rates[0]; ah->ah_txpower.txp_ofdm = rates[7]; } @@ -2591,16 +2599,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower) +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { /*Just a try M.F.*/ struct ieee80211_channel *channel = &ah->ah_current_channel; + u8 ee_mode; ATH5K_TRACE(ah->ah_sc); + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + case CHANNEL_T: + case CHANNEL_XR: + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + case CHANNEL_TG: + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + ee_mode = AR5K_EEPROM_MODE_11B; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, mode, txpower); + return ath5k_hw_txpower(ah, channel, ee_mode, txpower); } #undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 775fdf78554b..cb8a9a1398c9 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -1000,7 +1000,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, * Set TX power (FIXME) */ ret = ath5k_hw_txpower(ah, channel, ee_mode, - AR5K_TUNE_DEFAULT_TXPOWER); + ah->ah_txpower.txp_max_pwr / 2); if (ret) return ret; -- GitLab