From 9e42f715264ff158478fa30eaed847f6e131366b Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sat, 17 Oct 2015 06:04:35 +0200 Subject: [PATCH] drivers: net: cpsw: add phy-handle parsing add the ability to parse "phy-handle". This is needed for phys, which have a DT node, and need to parse DT properties. Signed-off-by: Heiko Schocher Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw.txt | 1 + drivers/net/ethernet/ti/cpsw.c | 15 +++++++++++---- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index a9df21aaa154..a2cae4eb4a60 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -39,6 +39,7 @@ Required properties: Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory +- phy-handle : See ethernet.txt file in the same directory Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 8fc90f1c872c..874fb297e96c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -365,6 +366,7 @@ struct cpsw_priv { spinlock_t lock; struct platform_device *pdev; struct net_device *ndev; + struct device_node *phy_node; struct napi_struct napi_rx; struct napi_struct napi_tx; struct device *dev; @@ -1145,7 +1147,11 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); - slave->phy = phy_connect(priv->ndev, slave->data->phy_id, + if (priv->phy_node) + slave->phy = of_phy_connect(priv->ndev, priv->phy_node, + &cpsw_adjust_link, 0, slave->data->phy_if); + else + slave->phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); if (IS_ERR(slave->phy)) { dev_err(priv->dev, "phy %s not found on slave %d\n", @@ -1934,11 +1940,12 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv, slave->port_vlan = data->dual_emac_res_vlan; } -static int cpsw_probe_dt(struct cpsw_platform_data *data, +static int cpsw_probe_dt(struct cpsw_priv *priv, struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; struct device_node *slave_node; + struct cpsw_platform_data *data = &priv->data; int i = 0, ret; u32 prop; @@ -2029,6 +2036,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, if (strcmp(slave_node->name, "slave")) continue; + priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i); @@ -2044,7 +2052,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, mdio->name, phyid); - slave_data->phy_if = of_get_phy_mode(slave_node); if (slave_data->phy_if < 0) { dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n", @@ -2240,7 +2247,7 @@ static int cpsw_probe(struct platform_device *pdev) /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); - if (cpsw_probe_dt(&priv->data, pdev)) { + if (cpsw_probe_dt(priv, pdev)) { dev_err(&pdev->dev, "cpsw: platform data missing\n"); ret = -ENODEV; goto clean_runtime_disable_ret; -- GitLab