提交 9ba11ac0 编写于 作者: D David S. Miller

Merge branch 'mlx4-next'

Amir Vadai says:

====================
Mellanox drivers updates Feb-03-2015

This patchset introduces some small bug fixes and code cleanups in mlx4_core,
mlx4_en and mlx5_core.
I am sending it in parallel to the patchset sent by Or Gerlitz today [1] because
this is the end of the time frame for 3.20. I also checked that there are no
conflicts between those two patchsets (Or's patchset is focused on the bonding
area while this on Mellanox drivers).

The patchset was applied on top of commit 7d37d0c1 ('net: sctp: Deletion of an
unnecessary check before the function call "kfree"')

[1] - [PATCH 00/10] Add HA and LAG support to mlx4 RoCE and SRIOV services
      http://marc.info/?l=linux-netdev&m=142297582610254&w=2
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -2202,6 +2202,10 @@ static int mlx4_en_set_features(struct net_device *netdev,
return ret;
}
if (DEV_FEATURE_CHANGED(netdev, features, NETIF_F_HW_VLAN_CTAG_TX))
en_info(priv, "Turn %s TX vlan strip offload\n",
(features & NETIF_F_HW_VLAN_CTAG_TX) ? "ON" : "OFF");
if (features & NETIF_F_LOOPBACK)
priv->ctrl_flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK);
else
......
......@@ -162,6 +162,10 @@ static int mlx4_en_init_allocator(struct mlx4_en_priv *priv,
if (mlx4_alloc_pages(priv, &ring->page_alloc[i],
frag_info, GFP_KERNEL | __GFP_COLD))
goto out;
en_dbg(DRV, priv, " frag %d allocator: - size:%d frags:%d\n",
i, ring->page_alloc[i].page_size,
atomic_read(&ring->page_alloc[i].page->_count));
}
return 0;
......@@ -1059,7 +1063,8 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
(eff_mtu > buf_size + frag_sizes[i]) ?
frag_sizes[i] : eff_mtu - buf_size;
priv->frag_info[i].frag_prefix_size = buf_size;
priv->frag_info[i].frag_stride = ALIGN(frag_sizes[i],
priv->frag_info[i].frag_stride =
ALIGN(priv->frag_info[i].frag_size,
SMP_CACHE_BYTES);
buf_size += priv->frag_info[i].frag_size;
i++;
......
......@@ -2169,7 +2169,7 @@ static const u8 config_dev_csum_flags[] = {
int mlx4_config_dev_retrieval(struct mlx4_dev *dev,
struct mlx4_config_dev_params *params)
{
struct mlx4_config_dev config_dev;
struct mlx4_config_dev config_dev = {0};
int err;
u8 csum_mask;
......
......@@ -251,7 +251,8 @@ static void mlx4_enable_cqe_eqe_stride(struct mlx4_dev *dev)
if (mlx4_is_master(dev))
dev_cap->function_caps |= MLX4_FUNC_CAP_EQE_CQE_STRIDE;
} else {
mlx4_dbg(dev, "Disabling CQE stride cacheLine unsupported\n");
if (cache_line_size() != 32 && cache_line_size() != 64)
mlx4_dbg(dev, "Disabling CQE stride, cacheLine size unsupported\n");
dev_cap->flags2 &= ~MLX4_DEV_CAP_FLAG2_CQE_STRIDE;
dev_cap->flags2 &= ~MLX4_DEV_CAP_FLAG2_EQE_STRIDE;
}
......
......@@ -598,14 +598,11 @@ int mlx4_mr_rereg_mem_write(struct mlx4_dev *dev, struct mlx4_mr *mr,
if (err)
return err;
mpt_entry->start = cpu_to_be64(mr->iova);
mpt_entry->length = cpu_to_be64(mr->size);
mpt_entry->entity_size = cpu_to_be32(mr->mtt.page_shift);
mpt_entry->pd_flags &= cpu_to_be32(MLX4_MPT_PD_MASK |
MLX4_MPT_PD_FLAG_EN_INV);
mpt_entry->flags &= cpu_to_be32(MLX4_MPT_FLAG_FREE |
MLX4_MPT_FLAG_SW_OWNS);
mpt_entry->start = cpu_to_be64(iova);
mpt_entry->length = cpu_to_be64(size);
mpt_entry->entity_size = cpu_to_be32(page_shift);
mpt_entry->flags &= ~(cpu_to_be32(MLX4_MPT_FLAG_FREE |
MLX4_MPT_FLAG_SW_OWNS));
if (mr->mtt.order < 0) {
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_PHYSICAL);
mpt_entry->mtt_addr = 0;
......
......@@ -2541,7 +2541,7 @@ int mlx4_SW2HW_MPT_wrapper(struct mlx4_dev *dev, int slave,
/* Make sure that the PD bits related to the slave id are zeros. */
pd = mr_get_pd(inbox->buf);
pd_slave = (pd >> 17) & 0x7f;
if (pd_slave != 0 && pd_slave != slave) {
if (pd_slave != 0 && --pd_slave != slave) {
err = -EPERM;
goto ex_abort;
}
......
......@@ -903,12 +903,12 @@ static void remove_one(struct pci_dev *pdev)
}
static const struct pci_device_id mlx5_core_pci_table[] = {
{ PCI_VDEVICE(MELLANOX, 4113) }, /* Connect-IB */
{ PCI_VDEVICE(MELLANOX, 4114) }, /* Connect-IB VF */
{ PCI_VDEVICE(MELLANOX, 4115) }, /* ConnectX-4 */
{ PCI_VDEVICE(MELLANOX, 4116) }, /* ConnectX-4 VF */
{ PCI_VDEVICE(MELLANOX, 4117) }, /* ConnectX-4LX */
{ PCI_VDEVICE(MELLANOX, 4118) }, /* ConnectX-4LX VF */
{ PCI_VDEVICE(MELLANOX, 0x1011) }, /* Connect-IB */
{ PCI_VDEVICE(MELLANOX, 0x1012) }, /* Connect-IB VF */
{ PCI_VDEVICE(MELLANOX, 0x1013) }, /* ConnectX-4 */
{ PCI_VDEVICE(MELLANOX, 0x1014) }, /* ConnectX-4 VF */
{ PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */
{ PCI_VDEVICE(MELLANOX, 0x1016) }, /* ConnectX-4LX VF */
{ 0, }
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册