From 9719acce37803d179fc94884c8d50b883fc8186e Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 25 Jan 2015 14:44:52 -0500 Subject: [PATCH] serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling Commit 88838d3112702 ("serial: omap_8250: Fix RTS handling") fixed RTS pin control when in autoRTS mode. New support added in "serial: core: Rework hw-assisted flow control support" enables a much simpler approach; rather than masking out autoRTS whenever writing the EFR register, use the UPSTAT_* mode to determine if autoRTS should be enabled when raising RTS (in omap8250_set_mctrl()). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 6e4ff7148ead..fe6d2e51da09 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -120,10 +120,11 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) */ lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (mctrl & TIOCM_RTS) - serial_out(up, UART_EFR, priv->efr); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; else - serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); serial_out(up, UART_LCR, lcr); } @@ -272,10 +273,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_dl_write(up, priv->quot); - if (up->port.mctrl & TIOCM_RTS) - serial_out(up, UART_EFR, priv->efr); - else - serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); + serial_out(up, UART_EFR, priv->efr); /* Configure flow control */ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -424,9 +422,9 @@ static void omap_8250_set_termios(struct uart_port *port, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable AUTORTS and AUTOCTS */ + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; - priv->efr |= UART_EFR_CTS | UART_EFR_RTS; + priv->efr |= UART_EFR_CTS; } else if (up->port.flags & UPF_SOFT_FLOW) { /* * IXON Flag: -- GitLab