From 948e78c3fc9c799b3f9b6c683b83c665942e6bbe Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 1 Mar 2010 14:41:59 +0000 Subject: [PATCH] powerpc/86xx: Renaming following split of GE Fanuc joint venture This patch renames GE Fanuc boards following the split-up of the GE Fanuc joint venture. These boards are now made by GE Intelligent platorms. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_ppc9a.dts | 4 ++-- arch/powerpc/boot/dts/gef_sbc310.dts | 4 ++-- arch/powerpc/boot/dts/gef_sbc610.dts | 4 ++-- arch/powerpc/platforms/86xx/Kconfig | 12 ++++++------ arch/powerpc/platforms/86xx/gef_gpio.c | 10 +++++----- arch/powerpc/platforms/86xx/gef_pic.c | 6 +++--- arch/powerpc/platforms/86xx/gef_ppc9a.c | 12 ++++++------ arch/powerpc/platforms/86xx/gef_sbc310.c | 12 ++++++------ arch/powerpc/platforms/86xx/gef_sbc610.c | 12 ++++++------ 9 files changed, 38 insertions(+), 38 deletions(-) diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 977f260d5e64..83f4b79dff85 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc PPC9A Device Tree Source + * GE PPC9A Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 8e4efff3bda1..fc3a331dd392 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc SBC310 Device Tree Source + * GE SBC310 Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index bb7060078fb4..c0671cc98125 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc SBC610 Device Tree Source + * GE SBC610 Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 2bbfd530d6d8..fbe9f3621424 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -33,32 +33,32 @@ config MPC8610_HPCD This option enables support for the MPC8610 HPCD board. config GEF_PPC9A - bool "GE Fanuc PPC9A" + bool "GE PPC9A" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help - This option enables support for GE Fanuc's PPC9A. + This option enables support for the GE PPC9A. config GEF_SBC310 - bool "GE Fanuc SBC310" + bool "GE SBC310" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help - This option enables support for GE Fanuc's SBC310. + This option enables support for the GE SBC310. config GEF_SBC610 - bool "GE Fanuc SBC610" + bool "GE SBC610" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO help - This option enables support for GE Fanuc's SBC610. + This option enables support for the GE SBC610. endif diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c index b2ea8875adba..11f7b2b6f49e 100644 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ b/arch/powerpc/platforms/86xx/gef_gpio.c @@ -1,9 +1,9 @@ /* - * Driver for GE Fanuc's FPGA based GPIO pins + * Driver for GE FPGA based GPIO * - * Author: Martyn Welch + * Author: Martyn Welch * - * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -164,6 +164,6 @@ static int __init gef_gpio_init(void) }; arch_initcall(gef_gpio_init); -MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver"); -MODULE_AUTHOR("Martyn Welch + * Author: Martyn Welch * - * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index a792e5d85813..60ce07e39100 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -1,9 +1,9 @@ /* - * GE Fanuc PPC9A board support + * GE PPC9A board support * - * Author: Martyn Welch + * Author: Martyn Welch * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), ('A' + gef_ppc9a_get_board_rev())); @@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_ppc9a, declare_of_platform_devices); define_machine(gef_ppc9a) { - .name = "GE Fanuc PPC9A", + .name = "GE PPC9A", .probe = gef_ppc9a_probe, .setup_arch = gef_ppc9a_setup_arch, .init_IRQ = gef_ppc9a_init_irq, diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 6a1a613836c2..3ecee25bf3ed 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -1,9 +1,9 @@ /* - * GE Fanuc SBC310 board support + * GE SBC310 board support * - * Author: Martyn Welch + * Author: Martyn Welch * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), @@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_sbc310, declare_of_platform_devices); define_machine(gef_sbc310) { - .name = "GE Fanuc SBC310", + .name = "GE SBC310", .probe = gef_sbc310_probe, .setup_arch = gef_sbc310_setup_arch, .init_IRQ = gef_sbc310_init_irq, diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index e10688a0fc4e..5090d608d9ee 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -1,9 +1,9 @@ /* - * GE Fanuc SBC610 board support + * GE SBC610 board support * - * Author: Martyn Welch + * Author: Martyn Welch * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), ('A' + gef_sbc610_get_board_rev() - 1)); @@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_sbc610, declare_of_platform_devices); define_machine(gef_sbc610) { - .name = "GE Fanuc SBC610", + .name = "GE SBC610", .probe = gef_sbc610_probe, .setup_arch = gef_sbc610_setup_arch, .init_IRQ = gef_sbc610_init_irq, -- GitLab