From 92cf211874e954027b8e91cc9a15485a50b58d6b Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 12 May 2015 16:41:46 +0200 Subject: [PATCH] sched/preempt: Merge preempt_mask.h into preempt.h preempt_mask.h defines all the preempt_count semantics and related symbols: preempt, softirq, hardirq, nmi, preempt active, need resched, etc... preempt.h defines the accessors and mutators of preempt_count. But there is a messy dependency game around those two header files: * preempt_mask.h includes preempt.h in order to access preempt_count() * preempt_mask.h defines all preempt_count semantic and symbols except PREEMPT_NEED_RESCHED that is needed by asm/preempt.h Thus we need to define it from preempt.h, right before including asm/preempt.h, instead of defining it to preempt_mask.h with the other preempt_count symbols. Therefore the preempt_count semantics happen to be spread out. * We plan to introduce preempt_active_[enter,exit]() to consolidate preempt_schedule*() code. But we'll need to access both preempt_count mutators (preempt_count_add()) and preempt_count symbols (PREEMPT_ACTIVE, PREEMPT_OFFSET). The usual place to define preempt operations is in preempt.h but then we'll need symbols in preempt_mask.h which already includes preempt.h. So we end up with a ressource circle dependency. Lets merge preempt_mask.h into preempt.h to solve these dependency issues. This way we gather semantic symbols and operation definition of preempt_count in a single file. This is a dumb copy-paste merge. Further merge re-arrangments are performed in a subsequent patch to ease review. Signed-off-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1431441711-29753-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar --- arch/m68k/include/asm/irqflags.h | 3 - include/linux/bottom_half.h | 1 - include/linux/hardirq.h | 2 +- include/linux/preempt.h | 111 +++++++++++++++++++++++++++++ include/linux/preempt_mask.h | 117 ------------------------------- include/linux/sched.h | 2 +- lib/radix-tree.c | 2 +- 7 files changed, 114 insertions(+), 124 deletions(-) delete mode 100644 include/linux/preempt_mask.h diff --git a/arch/m68k/include/asm/irqflags.h b/arch/m68k/include/asm/irqflags.h index a823cd73dc09..b5941818346f 100644 --- a/arch/m68k/include/asm/irqflags.h +++ b/arch/m68k/include/asm/irqflags.h @@ -2,9 +2,6 @@ #define _M68K_IRQFLAGS_H #include -#ifdef CONFIG_MMU -#include -#endif #include #include #include diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h index 86c12c93e3cf..8fdcb783197d 100644 --- a/include/linux/bottom_half.h +++ b/include/linux/bottom_half.h @@ -2,7 +2,6 @@ #define _LINUX_BH_H #include -#include #ifdef CONFIG_TRACE_IRQFLAGS extern void __local_bh_disable_ip(unsigned long ip, unsigned int cnt); diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index f4af03404b97..dfd59d6bc6f0 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -1,7 +1,7 @@ #ifndef LINUX_HARDIRQ_H #define LINUX_HARDIRQ_H -#include +#include #include #include #include diff --git a/include/linux/preempt.h b/include/linux/preempt.h index de83b4eb1642..8cc0338a5e9a 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -17,6 +17,117 @@ #include +/* + * We put the hardirq and softirq counter into the preemption + * counter. The bitmask has the following meaning: + * + * - bits 0-7 are the preemption count (max preemption depth: 256) + * - bits 8-15 are the softirq count (max # of softirqs: 256) + * + * The hardirq count could in theory be the same as the number of + * interrupts in the system, but we run all interrupt handlers with + * interrupts disabled, so we cannot have nesting interrupts. Though + * there are a few palaeontologic drivers which reenable interrupts in + * the handler, so we need more than one bit here. + * + * PREEMPT_MASK: 0x000000ff + * SOFTIRQ_MASK: 0x0000ff00 + * HARDIRQ_MASK: 0x000f0000 + * NMI_MASK: 0x00100000 + * PREEMPT_ACTIVE: 0x00200000 + */ +#define PREEMPT_BITS 8 +#define SOFTIRQ_BITS 8 +#define HARDIRQ_BITS 4 +#define NMI_BITS 1 + +#define PREEMPT_SHIFT 0 +#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS) +#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS) +#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS) + +#define __IRQ_MASK(x) ((1UL << (x))-1) + +#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT) +#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) +#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) +#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT) + +#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT) +#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT) +#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT) +#define NMI_OFFSET (1UL << NMI_SHIFT) + +#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET) + +#define PREEMPT_ACTIVE_BITS 1 +#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS) +#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT) + +#define hardirq_count() (preempt_count() & HARDIRQ_MASK) +#define softirq_count() (preempt_count() & SOFTIRQ_MASK) +#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \ + | NMI_MASK)) + +/* + * Are we doing bottom half or hardware interrupt processing? + * Are we in a softirq context? Interrupt context? + * in_softirq - Are we currently processing softirq or have bh disabled? + * in_serving_softirq - Are we currently processing softirq? + */ +#define in_irq() (hardirq_count()) +#define in_softirq() (softirq_count()) +#define in_interrupt() (irq_count()) +#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET) + +/* + * Are we in NMI context? + */ +#define in_nmi() (preempt_count() & NMI_MASK) + +#if defined(CONFIG_PREEMPT_COUNT) +# define PREEMPT_CHECK_OFFSET 1 +#else +# define PREEMPT_CHECK_OFFSET 0 +#endif + +/* + * The preempt_count offset needed for things like: + * + * spin_lock_bh() + * + * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and + * softirqs, such that unlock sequences of: + * + * spin_unlock(); + * local_bh_enable(); + * + * Work as expected. + */ +#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET) + +/* + * Are we running in atomic context? WARNING: this macro cannot + * always detect atomic context; in particular, it cannot know about + * held spinlocks in non-preemptible kernels. Thus it should not be + * used in the general case to determine whether sleeping is possible. + * Do not use in_atomic() in driver code. + */ +#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0) + +/* + * Check whether we were atomic before we did preempt_disable(): + * (used by the scheduler, *after* releasing the kernel lock) + */ +#define in_atomic_preempt_off() \ + ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET) + +#ifdef CONFIG_PREEMPT_COUNT +# define preemptible() (preempt_count() == 0 && !irqs_disabled()) +#else +# define preemptible() 0 +#endif + #if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER) extern void preempt_count_add(int val); extern void preempt_count_sub(int val); diff --git a/include/linux/preempt_mask.h b/include/linux/preempt_mask.h deleted file mode 100644 index dbeec4d4a3be..000000000000 --- a/include/linux/preempt_mask.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef LINUX_PREEMPT_MASK_H -#define LINUX_PREEMPT_MASK_H - -#include - -/* - * We put the hardirq and softirq counter into the preemption - * counter. The bitmask has the following meaning: - * - * - bits 0-7 are the preemption count (max preemption depth: 256) - * - bits 8-15 are the softirq count (max # of softirqs: 256) - * - * The hardirq count could in theory be the same as the number of - * interrupts in the system, but we run all interrupt handlers with - * interrupts disabled, so we cannot have nesting interrupts. Though - * there are a few palaeontologic drivers which reenable interrupts in - * the handler, so we need more than one bit here. - * - * PREEMPT_MASK: 0x000000ff - * SOFTIRQ_MASK: 0x0000ff00 - * HARDIRQ_MASK: 0x000f0000 - * NMI_MASK: 0x00100000 - * PREEMPT_ACTIVE: 0x00200000 - */ -#define PREEMPT_BITS 8 -#define SOFTIRQ_BITS 8 -#define HARDIRQ_BITS 4 -#define NMI_BITS 1 - -#define PREEMPT_SHIFT 0 -#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS) -#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS) -#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS) - -#define __IRQ_MASK(x) ((1UL << (x))-1) - -#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT) -#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) -#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) -#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT) - -#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT) -#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT) -#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT) -#define NMI_OFFSET (1UL << NMI_SHIFT) - -#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET) - -#define PREEMPT_ACTIVE_BITS 1 -#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS) -#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT) - -#define hardirq_count() (preempt_count() & HARDIRQ_MASK) -#define softirq_count() (preempt_count() & SOFTIRQ_MASK) -#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \ - | NMI_MASK)) - -/* - * Are we doing bottom half or hardware interrupt processing? - * Are we in a softirq context? Interrupt context? - * in_softirq - Are we currently processing softirq or have bh disabled? - * in_serving_softirq - Are we currently processing softirq? - */ -#define in_irq() (hardirq_count()) -#define in_softirq() (softirq_count()) -#define in_interrupt() (irq_count()) -#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET) - -/* - * Are we in NMI context? - */ -#define in_nmi() (preempt_count() & NMI_MASK) - -#if defined(CONFIG_PREEMPT_COUNT) -# define PREEMPT_CHECK_OFFSET 1 -#else -# define PREEMPT_CHECK_OFFSET 0 -#endif - -/* - * The preempt_count offset needed for things like: - * - * spin_lock_bh() - * - * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and - * softirqs, such that unlock sequences of: - * - * spin_unlock(); - * local_bh_enable(); - * - * Work as expected. - */ -#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET) - -/* - * Are we running in atomic context? WARNING: this macro cannot - * always detect atomic context; in particular, it cannot know about - * held spinlocks in non-preemptible kernels. Thus it should not be - * used in the general case to determine whether sleeping is possible. - * Do not use in_atomic() in driver code. - */ -#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0) - -/* - * Check whether we were atomic before we did preempt_disable(): - * (used by the scheduler, *after* releasing the kernel lock) - */ -#define in_atomic_preempt_off() \ - ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET) - -#ifdef CONFIG_PREEMPT_COUNT -# define preemptible() (preempt_count() == 0 && !irqs_disabled()) -#else -# define preemptible() 0 -#endif - -#endif /* LINUX_PREEMPT_MASK_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 5f8defa155cf..c53a1784d7a9 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -25,7 +25,7 @@ struct sched_param { #include #include #include -#include +#include #include #include diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 3d2aa27b845b..061550de77bc 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -33,7 +33,7 @@ #include #include #include -#include /* in_interrupt() */ +#include /* in_interrupt() */ /* -- GitLab