From 871d5f8dd0f7647f03facd4cb79485938d1b61ab Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 19 Feb 2008 03:20:09 -0800 Subject: [PATCH] x86: get mp_bus_to_node early Currently, on an amd k8 system with multi ht chains, the numa_node of pci devices under /sys/devices/pci0000:80/* is always 0, even if that chain is on node 1 or 2 or 3. Workaround: pcibus_to_node(bus) is used when we want to get the node that pci_device is on. In struct device, we already have numa_node member, and we could use dev_to_node()/set_dev_node() to get and set numa_node in the device. set_dev_node is called in pci_device_add() with pcibus_to_node(bus), and pcibus_to_node uses bus->sysdata for nodeid. The problem is when pci_add_device is called, bus->sysdata is not assigned correct nodeid yet. The result is that numa_node will always be 0. pcibios_scan_root and pci_scan_root could take sysdata. So we need to get mp_bus_to_node mapping before these two are called, and thus get_mp_bus_to_node could get correct node for sysdata in root bus. In scanning of the root bus, all child busses will take parent bus sysdata. So all pci_device->dev.numa_node will be assigned correctly and automatically. Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we could also could make other bus specific device get the correct numa_node too. This is an updated version of pci_sysdata and Jeff's pci_domain patch. [ mingo@elte.hu: build fix ] Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/pci/Makefile_32 | 1 + arch/x86/pci/acpi.c | 27 ++++++---- arch/x86/pci/common.c | 18 +++++-- arch/x86/pci/irq.c | 4 +- arch/x86/pci/k8-bus_64.c | 92 +++++++++++++++++++++++++---------- arch/x86/pci/legacy.c | 4 +- arch/x86/pci/mp_bus_to_node.c | 23 +++++++++ include/asm-x86/pci.h | 2 + include/asm-x86/topology.h | 13 +++++ 9 files changed, 142 insertions(+), 42 deletions(-) create mode 100644 arch/x86/pci/mp_bus_to_node.c diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index cdd6828b5abb..e9c5caf54e59 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -10,5 +10,6 @@ pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o +pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 2664cb3fc96c..1a9c0c6a1a18 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do { struct pci_bus *bus; struct pci_sysdata *sd; + int node; +#ifdef CONFIG_ACPI_NUMA int pxm; +#endif dmi_check_system(acpi_pciprobe_dmi_table); @@ -201,6 +204,17 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do return NULL; } + node = -1; +#ifdef CONFIG_ACPI_NUMA + pxm = acpi_get_pxm(device->handle); + if (pxm >= 0) + node = pxm_to_node(pxm); + if (node != -1) + set_mp_bus_to_node(busnum, node); + else + node = get_mp_bus_to_node(busnum); +#endif + /* Allocate per-root-bus (not per bus) arch-specific data. * TODO: leak; this memory is never freed. * It's arguable whether it's worth the trouble to care. @@ -212,13 +226,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do } sd->domain = domain; - sd->node = -1; - - pxm = acpi_get_pxm(device->handle); -#ifdef CONFIG_ACPI_NUMA - if (pxm >= 0) - sd->node = pxm_to_node(pxm); -#endif + sd->node = node; /* * Maybe the desired pci bus has been already scanned. In such case * it is unnecessary to scan the pci bus with the given domain,busnum. @@ -238,9 +246,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do kfree(sd); #ifdef CONFIG_ACPI_NUMA - if (bus != NULL) { + if (bus) { if (pxm >= 0) { - printk("bus %d -> pxm %d -> node %d\n", + printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", busnum, pxm, pxm_to_node(pxm)); } } @@ -248,7 +256,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); - return bus; } diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 75fcc29ecf52..07d53184f7a4 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -342,9 +342,14 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) return NULL; } + sd->node = get_mp_bus_to_node(busnum); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); - return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + return bus; } extern u8 pci_cache_line_size; @@ -480,7 +485,7 @@ void pcibios_disable_device (struct pci_dev *dev) pcibios_disable_irq(dev); } -struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) +struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) { struct pci_bus *bus = NULL; struct pci_sysdata *sd; @@ -495,10 +500,15 @@ struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); return NULL; } - sd->node = -1; - bus = pci_scan_bus(busno, &pci_root_ops, sd); + sd->node = node; + bus = pci_scan_bus(busno, ops, sd); if (!bus) kfree(sd); return bus; } + +struct pci_bus *pci_scan_bus_with_sysdata(int busno) +{ + return pci_scan_bus_on_node(busno, &pci_root_ops, -1); +} diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 579745ca6b66..0908fca901bf 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void) busmap[e->bus] = 1; } for(i = 1; i < 256; i++) { + int node; if (!busmap[i] || pci_find_bus(0, i)) continue; - if (pci_scan_bus_with_sysdata(i)) + node = get_mp_bus_to_node(i); + if (pci_scan_bus_on_node(i, &pci_root_ops, node)) printk(KERN_INFO "PCI: Discovered primary peer " "bus %02x [IRQ]\n", i); } diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c index 9cc813e29706..3903efbca535 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/k8-bus_64.c @@ -1,7 +1,9 @@ #include #include +#include #include #include +#include /* * This discovers the pcibus <-> node mapping on AMD K8. @@ -20,64 +22,102 @@ #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 +#ifdef CONFIG_NUMA + +#define BUS_NR 256 + +static int mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} + +#endif + /** - * fill_mp_bus_to_cpumask() + * early_fill_mp_bus_to_node() + * called before pcibios_scan_root and pci_scan_bus * fills the mp_bus_to_cpumask array based according to the LDT Bus Number * Registers found in the K8 northbridge */ __init static int -fill_mp_bus_to_cpumask(void) +early_fill_mp_bus_to_node(void) { - struct pci_dev *nb_dev = NULL; +#ifdef CONFIG_NUMA int i, j; + unsigned slot; u32 ldtbus, nid; + u32 id; static int lbnr[3] = { LDT_BUS_NUMBER_REGISTER_0, LDT_BUS_NUMBER_REGISTER_1, LDT_BUS_NUMBER_REGISTER_2 }; - while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) { - pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid); + for (i = 0; i < BUS_NR; i++) + mp_bus_to_node[i] = -1; + + if (!early_pci_allowed()) + return -1; + + for (slot = 0x18; slot < 0x20; slot++) { + id = read_pci_config(0, slot, 0, PCI_VENDOR_ID); + if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16))) + break; + nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER); for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { - pci_read_config_dword(nb_dev, lbnr[i], &ldtbus); + ldtbus = read_pci_config(0, slot, 0, lbnr[i]); /* * if there are no busses hanging off of the current * ldt link then both the secondary and subordinate * bus number fields are set to 0. - * + * * RED-PEN * This is slightly broken because it assumes - * HT node IDs == Linux node ids, which is not always + * HT node IDs == Linux node ids, which is not always * true. However it is probably mostly true. */ if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); - j++) { - struct pci_bus *bus; - struct pci_sysdata *sd; - - long node = NODE_ID(nid); - /* Algorithm a bit dumb, but - it shouldn't matter here */ - bus = pci_find_bus(0, j); - if (!bus) - continue; - if (!node_online(node)) - node = 0; - - sd = bus->sysdata; - sd->node = node; - } + j++) { + int node = NODE_ID(nid); + mp_bus_to_node[j] = (unsigned char)node; + } } } } + for (i = 0; i < BUS_NR; i++) { + int node = mp_bus_to_node[i]; + if (node >= 0) + printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); + } +#endif return 0; } -fs_initcall(fill_mp_bus_to_cpumask); +postcore_initcall(early_fill_mp_bus_to_node); diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index e041ced0ce13..a67921ce60af 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -12,6 +12,7 @@ static void __devinit pcibios_fixup_peer_bridges(void) { int n, devfn; + long node; if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) return; @@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer_bridges(void) u32 l; if (pci_find_bus(0, n)) continue; + node = get_mp_bus_to_node(n); for (devfn = 0; devfn < 256; devfn += 8) { if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && l != 0x0000 && l != 0xffff) { DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_with_sysdata(n); + pci_scan_bus_on_node(n, &pci_root_ops, node); break; } } diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c new file mode 100644 index 000000000000..022943999b84 --- /dev/null +++ b/arch/x86/pci/mp_bus_to_node.c @@ -0,0 +1,23 @@ +#include +#include +#include + +#define BUS_NR 256 + +static unsigned char mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = (unsigned char) node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return 0; + node = mp_bus_to_node[busnum]; + return node; +} diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index ddd8e248fc0a..30bbde0cb34b 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h @@ -19,6 +19,8 @@ struct pci_sysdata { }; /* scan a bus after allocating a pci_sysdata for it */ +extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, + int node); extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); static inline int pci_domain_nr(struct pci_bus *bus) diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index 22073268b481..4793ae745a78 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -198,4 +198,17 @@ extern cpumask_t cpu_coregroup_map(int cpu); #define smt_capable() (smp_num_siblings > 1) #endif +#ifdef CONFIG_NUMA +extern int get_mp_bus_to_node(int busnum); +extern void set_mp_bus_to_node(int busnum, int node); +#else +static inline int get_mp_bus_to_node(int busnum) +{ + return 0; +} +static inline void set_mp_bus_to_node(int busnum, int node) +{ +} +#endif + #endif -- GitLab