From 85eb0e4b15efc8034cbae193c99536dae7896701 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Fri, 22 Jan 2010 04:02:46 +0000 Subject: [PATCH] Blackfin: mark MUSB VRSEL as active high for appropriate boards These boards all have the GPIO VRSEL hooked up as an active high. Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 4 ++++ arch/blackfin/mach-bf527/boards/ezbrd.c | 4 ++++ arch/blackfin/mach-bf527/boards/ezkit.c | 4 ++++ arch/blackfin/mach-bf548/boards/cm_bf548.c | 4 ++++ arch/blackfin/mach-bf548/boards/ezkit.c | 4 ++++ 5 files changed, 20 insertions(+) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index ebe76d1e874a..f392af641657 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -98,6 +98,10 @@ static struct musb_hdrc_config musb_config = { .num_eps = 8, .dma_channels = 8, .gpio_vrsel = GPIO_PF11, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, }; static struct musb_hdrc_platform_data musb_plat = { diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 55069af4f67d..606eb36b9d6e 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -62,6 +62,10 @@ static struct musb_hdrc_config musb_config = { .num_eps = 8, .dma_channels = 8, .gpio_vrsel = GPIO_PG13, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, }; static struct musb_hdrc_platform_data musb_plat = { diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 923383386aa1..a05c967a24cf 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -102,6 +102,10 @@ static struct musb_hdrc_config musb_config = { .num_eps = 8, .dma_channels = 8, .gpio_vrsel = GPIO_PG13, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, }; static struct musb_hdrc_platform_data musb_plat = { diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index f60c333fec66..dbb6b1d83f6d 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -498,6 +498,10 @@ static struct musb_hdrc_config musb_config = { .num_eps = 8, .dma_channels = 8, .gpio_vrsel = GPIO_PH6, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, }; static struct musb_hdrc_platform_data musb_plat = { diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 06919db00a74..6fcfb9187c35 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -603,6 +603,10 @@ static struct musb_hdrc_config musb_config = { .num_eps = 8, .dma_channels = 8, .gpio_vrsel = GPIO_PE7, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, }; static struct musb_hdrc_platform_data musb_plat = { -- GitLab