Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 813a224f 编写于 作者: A Alan Cox 提交者： Linus Torvalds
浏览文件
操作

cypress_m8: coding style 

Coding style clean ups
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 b9c52f15
显示空白变更内容
内联 并排
Showing with 324 addition and 293 deletion
drivers/usb/serial/cypress_m8.c
浏览文件 @ 813a224f
......@@ -11,19 +11,21 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
* See http://geocities.com/i0xox0i for information on this driver and the
* earthmate usb device.
*
* Lonnie Mendez <dignome@gmail.com>
* 4-29-2005
* Fixed problem where setting or retreiving the serial config would fail with
* EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial
* adapters. Issued new interval of 1ms instead of the default 10ms. As a
* result, transfer speed has been substantially increased. From avg. 850bps to
* avg. 3300bps. initial termios has also been modified. Cleaned up code and
* formatting issues so it is more readable. Replaced the C++ style comments.
* Fixed problem where setting or retreiving the serial config would fail
* with EPIPE. Removed CRTS toggling so the driver behaves more like
* other usbserial adapters. Issued new interval of 1ms instead of the
* default 10ms. As a result, transfer speed has been substantially
* increased from avg. 850bps to avg. 3300bps. initial termios has also
* been modified. Cleaned up code and formatting issues so it is more
* readable. Replaced the C++ style comments.
*
* Lonnie Mendez <dignome@gmail.com>
* 12-15-2004
......@@ -42,10 +44,11 @@
*
*/
/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
for linux. */
/* Thanks to cypress for providing references for the hid reports. */
/* Thanks to Jiang Zhang for providing links and for general help. */
/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
#include <linux/kernel.h>
......@@ -62,7 +65,7 @@
#include <linux/usb/serial.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
#include "cypress_m8.h"
......@@ -112,7 +115,7 @@ static struct usb_device_id id_table_combined [] = {
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver cypress_driver = {
.name = "cypress",
......@@ -146,11 +149,13 @@ struct cypress_private {
__u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
enum packet_format pkt_fmt; /* format to use for packet send / receive */
int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
int baud_rate; /* stores current baud rate in integer form */
int baud_rate; /* stores current baud rate in
integer form */
int isthrottled; /* if throttled, discard reads */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
/* we pass a pointer to this as the arguement sent to
cypress_set_termios old_termios */
struct ktermios tmp_termios; /* stores the old termios settings */
};
......@@ -163,33 +168,41 @@ struct cypress_buf {
};
/* function prototypes for the Cypress USB to serial device */
static int cypress_earthmate_startup (struct usb_serial *serial);
static int cypress_hidcom_startup (struct usb_serial *serial);
static int cypress_ca42v2_startup (struct usb_serial *serial);
static void cypress_shutdown (struct usb_serial *serial);
static int cypress_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
static void cypress_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
static int cypress_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
static void cypress_send (struct usb_serial_port *port);
static int cypress_write_room (struct tty_struct *tty);
static int cypress_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
static void cypress_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
static int cypress_tiocmget (struct tty_struct *tty, struct file *file);
static int cypress_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer (struct tty_struct *tty);
static void cypress_throttle (struct tty_struct *tty);
static void cypress_unthrottle (struct tty_struct *tty);
static void cypress_set_dead (struct usb_serial_port *port);
static void cypress_read_int_callback (struct urb *urb);
static void cypress_write_int_callback (struct urb *urb);
static int cypress_earthmate_startup(struct usb_serial *serial);
static int cypress_hidcom_startup(struct usb_serial *serial);
static int cypress_ca42v2_startup(struct usb_serial *serial);
static void cypress_shutdown(struct usb_serial *serial);
static int cypress_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void cypress_close(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
static int cypress_write_room(struct tty_struct *tty);
static int cypress_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int cypress_tiocmget(struct tty_struct *tty, struct file *file);
static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer(struct tty_struct *tty);
static void cypress_throttle(struct tty_struct *tty);
static void cypress_unthrottle(struct tty_struct *tty);
static void cypress_set_dead(struct usb_serial_port *port);
static void cypress_read_int_callback(struct urb *urb);
static void cypress_write_int_callback(struct urb *urb);
/* write buffer functions */
static struct cypress_buf *cypress_buf_alloc(unsigned int size);
static void cypress_buf_free(struct cypress_buf *cb);
static void cypress_buf_clear(struct cypress_buf *cb);
static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
static unsigned int cypress_buf_put(struct cypress_buf *cb,
const char *buf, unsigned int count);
static unsigned int cypress_buf_get(struct cypress_buf *cb,
char *buf, unsigned int count);
static struct usb_serial_driver cypress_earthmate_device = {
......@@ -322,7 +335,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/* This function can either set or retrieve the current serial line settings */
static int cypress_serial_control (struct tty_struct *tty,
static int cypress_serial_control(struct tty_struct *tty,
struct usb_serial_port *port, speed_t baud_rate, int data_bits,
int stop_bits, int parity_enable, int parity_type, int reset,
int cypress_request_type)
......@@ -339,7 +352,7 @@ static int cypress_serial_control (struct tty_struct *tty,
if (!priv->comm_is_ok)
return -ENODEV;
switch(cypress_request_type) {
switch (cypress_request_type) {
case CYPRESS_SET_CONFIG:
new_baudrate = priv->baud_rate;
/* 0 means 'Hang up' so doesn't change the true bit rate */
......@@ -355,12 +368,12 @@ static int cypress_serial_control (struct tty_struct *tty,
__func__, new_baudrate);
}
}
dbg("%s - baud rate is being sent as %d", __func__, new_baudrate);
dbg("%s - baud rate is being sent as %d",
__func__, new_baudrate);
memset(feature_buffer, 0, sizeof(feature_buffer));
/* fill the feature_buffer with new configuration */
*((u_int32_t *)feature_buffer) = new_baudrate;
feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
/* 1 bit gap */
feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
......@@ -369,9 +382,12 @@ static int cypress_serial_control (struct tty_struct *tty,
/* 1 bit gap */
feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
dbg("%s - device is being sent this feature report:", __func__);
dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1],
feature_buffer[2], feature_buffer[3], feature_buffer[4]);
dbg("%s - device is being sent this feature report:",
__func__);
dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
feature_buffer[0], feature_buffer[1],
feature_buffer[2], feature_buffer[3],
feature_buffer[4]);
do {
retval = usb_control_msg(port->serial->dev,
......@@ -388,7 +404,8 @@ static int cypress_serial_control (struct tty_struct *tty,
retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
err("%s - failed sending serial line settings - %d", __func__, retval);
err("%s - failed sending serial line settings - %d",
__func__, retval);
cypress_set_dead(port);
} else {
spin_lock_irqsave(&priv->lock, flags);
......@@ -422,9 +439,8 @@ static int cypress_serial_control (struct tty_struct *tty,
if (tries++ >= 3)
break;
} while (retval != sizeof(feature_buffer) &&
retval != -ENODEV);
} while (retval != sizeof(feature_buffer)
&& retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
err("%s - failed to retrieve serial line settings - %d", __func__, retval);
......@@ -432,8 +448,8 @@ static int cypress_serial_control (struct tty_struct *tty,
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
/* store the config in one byte, and later use bit masks to check values */
/* store the config in one byte, and later
use bit masks to check values */
priv->current_config = feature_buffer[4];
priv->baud_rate = *((u_int32_t *)feature_buffer);
spin_unlock_irqrestore(&priv->lock, flags);
......@@ -470,14 +486,14 @@ static void cypress_set_dead(struct usb_serial_port *port)
*****************************************************************************/
static int generic_startup (struct usb_serial *serial)
static int generic_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
dbg("%s - port %d", __func__, port->number);
priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
......@@ -490,7 +506,7 @@ static int generic_startup (struct usb_serial *serial)
}
init_waitqueue_head(&priv->delta_msr_wait);
usb_reset_configuration (serial->dev);
usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
......@@ -502,22 +518,22 @@ static int generic_startup (struct usb_serial *serial)
small. Otherwise we can use the slightly more compact
format. This is in accordance with the cypress_m8 serial
converter app note. */
if (port->interrupt_out_size > 9) {
if (port->interrupt_out_size > 9)
priv->pkt_fmt = packet_format_1;
} else {
else
priv->pkt_fmt = packet_format_2;
}
if (interval > 0) {
priv->write_urb_interval = interval;
priv->read_urb_interval = interval;
dbg("%s - port %d read & write intervals forced to %d",
__func__,port->number,interval);
__func__, port->number, interval);
} else {
priv->write_urb_interval = port->interrupt_out_urb->interval;
priv->read_urb_interval = port->interrupt_in_urb->interval;
dbg("%s - port %d intervals: read=%d write=%d",
__func__,port->number,
priv->read_urb_interval,priv->write_urb_interval);
__func__, port->number,
priv->read_urb_interval, priv->write_urb_interval);
}
usb_set_serial_port_data(port, priv);
......@@ -525,7 +541,7 @@ static int generic_startup (struct usb_serial *serial)
}
static int cypress_earthmate_startup (struct usb_serial *serial)
static int cypress_earthmate_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
......@@ -543,7 +559,8 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
/* All Earthmate devices use the separated-count packet
format! Idiotic. */
priv->pkt_fmt = packet_format_1;
if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
if (serial->dev->descriptor.idProduct !=
cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
/* The old original USB Earthmate seemed able to
handle GET_CONFIG requests; everything they've
produced since that time crashes if this command is
......@@ -557,7 +574,7 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
} /* cypress_earthmate_startup */
static int cypress_hidcom_startup (struct usb_serial *serial)
static int cypress_hidcom_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
......@@ -576,7 +593,7 @@ static int cypress_hidcom_startup (struct usb_serial *serial)
} /* cypress_hidcom_startup */
static int cypress_ca42v2_startup (struct usb_serial *serial)
static int cypress_ca42v2_startup(struct usb_serial *serial)
{
struct cypress_private *priv;
......@@ -595,11 +612,11 @@ static int cypress_ca42v2_startup (struct usb_serial *serial)
} /* cypress_ca42v2_startup */
static void cypress_shutdown (struct usb_serial *serial)
static void cypress_shutdown(struct usb_serial *serial)
{
struct cypress_private *priv;
dbg ("%s - port %d", __func__, serial->port[0]->number);
dbg("%s - port %d", __func__, serial->port[0]->number);
/* all open ports are closed at this point */
......@@ -650,7 +667,9 @@ static int cypress_open(struct tty_struct *tty,
result = cypress_write(tty, port, NULL, 0);
if (result) {
dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
dev_err(&port->dev,
"%s - failed setting the control lines - error %d\n",
__func__, result);
return result;
} else
dbg("%s - success setting the control lines", __func__);
......@@ -659,19 +678,22 @@ static int cypress_open(struct tty_struct *tty,
cypress_set_termios(tty, port, &priv->tmp_termios);
/* setup the port and start reading from the device */
if(!port->interrupt_in_urb){
if (!port->interrupt_in_urb) {
err("%s - interrupt_in_urb is empty!", __func__);
return(-1);
return -1;
}
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result){
dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
if (result) {
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
cypress_set_dead(port);
}
......@@ -680,7 +702,7 @@ static int cypress_open(struct tty_struct *tty,
static void cypress_close(struct tty_struct *tty,
struct usb_serial_port *port, struct file * filp)
struct usb_serial_port *port, struct file *filp)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned int c_cflag;
......@@ -722,15 +744,15 @@ static void cypress_close(struct tty_struct *tty,
if (tty) {
bps = tty_get_baud_rate(tty);
if (bps > 1200)
timeout = max((HZ*2560)/bps,HZ/10);
timeout = max((HZ * 2560) / bps, HZ / 10);
else
timeout = 2*HZ;
timeout = 2 * HZ;
schedule_timeout_interruptible(timeout);
}
dbg("%s - stopping urbs", __func__);
usb_kill_urb (port->interrupt_in_urb);
usb_kill_urb (port->interrupt_out_urb);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
if (tty) {
c_cflag = tty->termios->c_cflag;
......@@ -746,7 +768,7 @@ static void cypress_close(struct tty_struct *tty,
}
if (stats)
dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
priv->bytes_in, priv->bytes_out, priv->cmd_count);
mutex_unlock(&port->serial->disc_mutex);
} /* cypress_close */
......@@ -792,7 +814,8 @@ static void cypress_send(struct usb_serial_port *port)
return;
dbg("%s - port %d", __func__, port->number);
dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size);
dbg("%s - interrupt out size is %d", __func__,
port->interrupt_out_size);
spin_lock_irqsave(&priv->lock, flags);
if (priv->write_urb_in_use) {
......@@ -803,7 +826,8 @@ static void cypress_send(struct usb_serial_port *port)
spin_unlock_irqrestore(&priv->lock, flags);
/* clear buffer */
memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
memset(port->interrupt_out_urb->transfer_buffer, 0,
port->interrupt_out_size);
spin_lock_irqsave(&priv->lock, flags);
switch (priv->pkt_fmt) {
......@@ -834,9 +858,8 @@ static void cypress_send(struct usb_serial_port *port)
count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
port->interrupt_out_size-offset);
if (count == 0) {
if (count == 0)
return;
}
switch (priv->pkt_fmt) {
default:
......@@ -860,26 +883,29 @@ static void cypress_send(struct usb_serial_port *port)
actual_size = count +
(priv->pkt_fmt == packet_format_1 ? 2 : 1);
usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size,
usb_serial_debug_data(debug, &port->dev, __func__,
port->interrupt_out_size,
port->interrupt_out_urb->transfer_buffer);
usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
port->interrupt_out_buffer, port->interrupt_out_size,
cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__,
result);
dev_err(&port->dev,
"%s - failed submitting write urb, error %d\n",
__func__, result);
priv->write_urb_in_use = 0;
cypress_set_dead(port);
}
spin_lock_irqsave(&priv->lock, flags);
if (priv->cmd_ctrl) {
if (priv->cmd_ctrl)
priv->cmd_ctrl = 0;
}
priv->bytes_out += count; /* do not count the line control and size bytes */
/* do not count the line control and size bytes */
priv->bytes_out += count;
spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_port_softint(port);
......@@ -958,7 +984,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
}
static int cypress_ioctl(struct tty_struct *tty, struct file * file,
static int cypress_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
......@@ -976,23 +1002,22 @@ static int cypress_ioctl(struct tty_struct *tty, struct file * file,
return -ERESTARTSYS;
else {
char diff = priv->diff_status;
if (diff == 0) {
if (diff == 0)
return -EIO; /* no change => error */
}
/* consume all events */
priv->diff_status = 0;
/* return 0 if caller wanted to know about these bits */
if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
/* return 0 if caller wanted to know about
these bits */
if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
((arg & TIOCM_CD) && (diff & UART_CD)) ||
((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
((arg & TIOCM_CTS) && (diff & UART_CTS)))
return 0;
}
/* otherwise caller can't care less about what happened,
* and so we continue to wait for more events.
/* otherwise caller can't care less about what
* happened, and so we continue to wait for
* more events.
*/
}
}
......@@ -1086,7 +1111,6 @@ static void cypress_set_termios(struct tty_struct *tty,
err("%s - CSIZE was set, but not CS5-CS8",
__func__);
data_bits = 3;
}
} else
data_bits = 3;
......@@ -1104,8 +1128,10 @@ static void cypress_set_termios(struct tty_struct *tty,
"%d data_bits (+5)", __func__, stop_bits,
parity_enable, parity_type, data_bits);
cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
cypress_serial_control(tty, port, tty_get_baud_rate(tty),
data_bits, stop_bits,
parity_enable, parity_type,
0, CYPRESS_SET_CONFIG);
/* we perform a CYPRESS_GET_CONFIG so that the current settings are
* filled into the private structure this should confirm that all is
......@@ -1116,7 +1142,7 @@ static void cypress_set_termios(struct tty_struct *tty,
* termios flag base comes from empeg.c */
spin_lock_irqsave(&priv->lock, flags);
if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
dbg("Using custom termios settings for a baud rate of "
"4800bps.");
/* define custom termios settings for NMEA protocol */
......@@ -1243,11 +1269,12 @@ static void cypress_read_int_callback(struct urb *urb)
/* precursor to disconnect so just go away */
return;
case -EPIPE:
usb_clear_halt(port->serial->dev,0x81);
usb_clear_halt(port->serial->dev, 0x81);
break;
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
dev_err(&urb->dev->dev,
"%s - unexpected nonzero read status received: %d\n",
__func__, status);
cypress_set_dead(port);
return;
......@@ -1296,7 +1323,7 @@ static void cypress_read_int_callback(struct urb *urb)
goto continue_read;
}
usb_serial_debug_data (debug, &port->dev, __func__,
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
......@@ -1356,7 +1383,8 @@ static void cypress_read_int_callback(struct urb *urb)
port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
cypress_read_int_callback, port, priv->read_urb_interval);
cypress_read_int_callback, port,
priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
......@@ -1403,17 +1431,18 @@ static void cypress_write_int_callback(struct urb *urb)
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (!result)
return;
dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
dev_err(&urb->dev->dev,
"%s - failed resubmitting write urb, error %d\n",
__func__, result);
cypress_set_dead(port);
break;
default:
dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
dev_err(&urb->dev->dev,
"%s - unexpected nonzero write status received: %d\n",
__func__, status);
cypress_set_dead(port);
break;
}
priv->write_urb_in_use = 0;
/* send any buffered data */
......@@ -1497,7 +1526,8 @@ static void cypress_buf_clear(struct cypress_buf *cb)
static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
{
if (cb != NULL)
return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
return (cb->buf_size + cb->buf_put - cb->buf_get)
% cb->buf_size;
else
return 0;
}
......@@ -1513,7 +1543,8 @@ static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
{
if (cb != NULL)
return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
% cb->buf_size;
else
return 0;
}
......@@ -1643,23 +1674,23 @@ static int __init cypress_init(void)
}
static void __exit cypress_exit (void)
static void __exit cypress_exit(void)
{
dbg("%s", __func__);
usb_deregister (&cypress_driver);
usb_serial_deregister (&cypress_earthmate_device);
usb_serial_deregister (&cypress_hidcom_device);
usb_serial_deregister (&cypress_ca42v2_device);
usb_deregister(&cypress_driver);
usb_serial_deregister(&cypress_earthmate_device);
usb_serial_deregister(&cypress_hidcom_device);
usb_serial_deregister(&cypress_ca42v2_device);
}
module_init(cypress_init);
module_exit(cypress_exit);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_VERSION( DRIVER_VERSION );
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或