diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 047609ef0515a5019673e3b6f5b2cdad9da15b38..920bccd6bc406515574bafdbd6b573d65fa02e6c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2637,7 +2637,6 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 }
 
 #define EEPROM_STAT_ADDR   0x7bfc
-#define VPD_SIZE           0x800
 #define VPD_BASE           0x400
 #define VPD_BASE_OLD       0
 #define VPD_LEN            1024
@@ -2704,15 +2703,6 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (!vpd)
 		return -ENOMEM;
 
-	/* We have two VPD data structures stored in the adapter VPD area.
-	 * By default, Linux calculates the size of the VPD area by traversing
-	 * the first VPD area at offset 0x0, so we need to tell the OS what
-	 * our real VPD size is.
-	 */
-	ret = pci_set_vpd_size(adapter->pdev, VPD_SIZE);
-	if (ret < 0)
-		goto out;
-
 	/* Card information normally starts at VPD_BASE but early cards had
 	 * it at 0.
 	 */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index fc734014206fb0845e9d6549e2b7b554f8845919..8b14bd326d4af32fbdaedd1258e2bb7c3ea489f5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3419,22 +3419,29 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
 
 static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
 {
-	pci_set_vpd_size(dev, 8192);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd);
+	int chip = (dev->device & 0xf000) >> 12;
+	int func = (dev->device & 0x0f00) >>  8;
+	int prod = (dev->device & 0x00ff) >>  0;
+
+	/*
+	 * If this is a T3-based adapter, there's a 1KB VPD area at offset
+	 * 0xc00 which contains the preferred VPD values.  If this is a T4 or
+	 * later based adapter, the special VPD is at offset 0x400 for the
+	 * Physical Functions (the SR-IOV Virtual Functions have no VPD
+	 * Capabilities).  The PCI VPD Access core routines will normally
+	 * compute the size of the VPD by parsing the VPD Data Structure at
+	 * offset 0x000.  This will result in silent failures when attempting
+	 * to accesses these other VPD areas which are beyond those computed
+	 * limits.
+	 */
+	if (chip == 0x0 && prod >= 0x20)
+		pci_set_vpd_size(dev, 8192);
+	else if (chip >= 0x4 && func < 0x8)
+		pci_set_vpd_size(dev, 2048);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+			quirk_chelsio_extend_vpd);
 
 #ifdef CONFIG_ACPI
 /*