[SCSI] qla2xxx: IDC implementation for ISP83xx.

Signed-off-by: NSantosh Vernekar <santosh.vernekar@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -564,6 +564,7 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 	int type;
+	uint32_t idc_control;
 
 	if (off != 0)
 		return -EINVAL;
@@ -587,12 +588,25 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 		scsi_unblock_requests(vha->host);
 		break;
 	case 0x2025d:
-		if (!IS_QLA81XX(ha) || !IS_QLA8031(ha))
+		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha))
 			return -EPERM;
 
 		ql_log(ql_log_info, vha, 0x706f,
 		    "Issuing MPI reset.\n");
 
+		if (IS_QLA83XX(ha)) {
+			uint32_t idc_control;
+
+			qla83xx_idc_lock(vha, 0);
+			__qla83xx_get_idc_control(vha, &idc_control);
+			idc_control |= QLA83XX_IDC_GRACEFUL_RESET;
+			__qla83xx_set_idc_control(vha, idc_control);
+			qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
+			    QLA8XXX_DEV_NEED_RESET);
+			qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
+			qla83xx_idc_unlock(vha, 0);
+			break;
+		} else {
 			/* Make sure FC side is not in reset */
 			qla2x00_wait_for_hba_online(vha);
 
@@ -603,6 +617,7 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 				    "MPI reset failed.\n");
 			scsi_unblock_requests(vha->host);
 			break;
+		}
 	case 0x2025e:
 		if (!IS_QLA82XX(ha) || vha != base_vha) {
 			ql_log(ql_log_info, vha, 0x7071,
@@ -616,6 +631,29 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 		qla2xxx_wake_dpc(vha);
 		qla2x00_wait_for_fcoe_ctx_reset(vha);
 		break;
+	case 0x2025f:
+		if (!IS_QLA8031(ha))
+			return -EPERM;
+		ql_log(ql_log_info, vha, 0x70bc,
+		    "Disabling Reset by IDC control\n");
+		qla83xx_idc_lock(vha, 0);
+		__qla83xx_get_idc_control(vha, &idc_control);
+		idc_control |= QLA83XX_IDC_RESET_DISABLED;
+		__qla83xx_set_idc_control(vha, idc_control);
+		qla83xx_idc_unlock(vha, 0);
+		break;
+	case 0x20260:
+		if (!IS_QLA8031(ha))
+			return -EPERM;
+		ql_log(ql_log_info, vha, 0x70bd,
+		    "Enabling Reset by IDC control\n");
+		qla83xx_idc_lock(vha, 0);
+		__qla83xx_get_idc_control(vha, &idc_control);
+		idc_control &= ~QLA83XX_IDC_RESET_DISABLED;
+		__qla83xx_set_idc_control(vha, idc_control);
+		qla83xx_idc_unlock(vha, 0);
+		break;
+
 	}
 	return count;
 }

drivers/scsi/qla2xxx/qla_bsg.c

@@ -1364,7 +1364,7 @@ qla2x00_read_optrom(struct fc_bsg_job *bsg_job)
 	struct qla_hw_data *ha = vha->hw;
 	int rval = 0;
 
-	if (ha->flags.isp82xx_reset_hdlr_active)
+	if (ha->flags.nic_core_reset_hdlr_active)
 		return -EBUSY;
 
 	rval = qla2x00_optrom_setup(bsg_job, vha, 0);

drivers/scsi/qla2xxx/qla_dbg.c

@@ -11,18 +11,18 @@
  * ----------------------------------------------------------------------
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
- * | Module Init and Probe        |       0x0123       | 0x4b,0xba,0xfa |
- * | Mailbox commands             |       0x1140       | 0x111a-0x111b  |
+ * | Module Init and Probe        |       0x0124       | 0x4b,0xba,0xfa |
+ * | Mailbox commands             |       0x114c       | 0x111a-0x111b  |
  * |                              |                    | 0x112c-0x112e  |
  * |                              |                    | 0x113a         |
  * | Device Discovery             |       0x2087       | 0x2020-0x2022  |
  * | Queue Command and IO tracing |       0x3030       | 0x3006,0x3008  |
  * |                              |                    | 0x302d-0x302e  |
  * | DPC Thread                   |       0x401c       | 0x4002,0x4013  |
- * | Async Events                 |       0x505f       | 0x502b-0x502f  |
+ * | Async Events                 |       0x506c       | 0x502b-0x502f  |
  * |                              |                    | 0x5047,0x5052  |
  * | Timer Routines               |       0x6011       |                |
- * | User Space Interactions      |       0x70bb       | 0x7018,0x702e, |
+ * | User Space Interactions      |       0x70bd       | 0x7018,0x702e, |
  * |                              |                    | 0x7039,0x7045, |
  * |                              |                    | 0x7073-0x7075, |
  * |                              |                    | 0x708c,        |
@@ -33,7 +33,7 @@
  * |                              |                    | 0x800b,0x8039  |
  * | AER/EEH                      |       0x9011       |		|
  * | Virtual Port                 |       0xa007       |		|
- * | ISP82XX Specific             |       0xb055       | 0xb024         |
+ * | ISP82XX Specific             |       0xb080       | 0xb024         |
  * | MultiQ                       |       0xc00c       |		|
  * | Misc                         |       0xd010       |		|
  * | Target Mode		  |	  0xe06f       |		|

drivers/scsi/qla2xxx/qla_def.h

@@ -114,6 +114,82 @@
 #define WRT_REG_WORD(addr, data)	writew(data,addr)
 #define WRT_REG_DWORD(addr, data)	writel(data,addr)
 
+/*
+ * ISP83XX specific remote register addresses
+ */
+#define QLA83XX_LED_PORT0			0x00201320
+#define QLA83XX_LED_PORT1			0x00201328
+#define QLA83XX_IDC_DEV_STATE		0x22102384
+#define QLA83XX_IDC_MAJOR_VERSION	0x22102380
+#define QLA83XX_IDC_MINOR_VERSION	0x22102398
+#define QLA83XX_IDC_DRV_PRESENCE	0x22102388
+#define QLA83XX_IDC_DRIVER_ACK		0x2210238c
+#define QLA83XX_IDC_CONTROL			0x22102390
+#define QLA83XX_IDC_AUDIT			0x22102394
+#define QLA83XX_IDC_LOCK_RECOVERY	0x2210239c
+#define QLA83XX_DRIVER_LOCKID		0x22102104
+#define QLA83XX_DRIVER_LOCK			0x8111c028
+#define QLA83XX_DRIVER_UNLOCK		0x8111c02c
+#define QLA83XX_FLASH_LOCKID		0x22102100
+#define QLA83XX_FLASH_LOCK			0x8111c010
+#define QLA83XX_FLASH_UNLOCK		0x8111c014
+#define QLA83XX_DEV_PARTINFO1		0x221023e0
+#define QLA83XX_DEV_PARTINFO2		0x221023e4
+#define QLA83XX_FW_HEARTBEAT		0x221020b0
+#define QLA83XX_PEG_HALT_STATUS1	0x221020a8
+#define QLA83XX_PEG_HALT_STATUS2	0x221020ac
+
+/* 83XX: Macros defining 8200 AEN Reason codes */
+#define IDC_DEVICE_STATE_CHANGE BIT_0
+#define IDC_PEG_HALT_STATUS_CHANGE BIT_1
+#define IDC_NIC_FW_REPORTED_FAILURE BIT_2
+#define IDC_HEARTBEAT_FAILURE BIT_3
+
+/* 83XX: Macros defining 8200 AEN Error-levels */
+#define ERR_LEVEL_NON_FATAL 0x1
+#define ERR_LEVEL_RECOVERABLE_FATAL 0x2
+#define ERR_LEVEL_UNRECOVERABLE_FATAL 0x4
+
+/* 83XX: Macros for IDC Version */
+#define QLA83XX_SUPP_IDC_MAJOR_VERSION 0x01
+#define QLA83XX_SUPP_IDC_MINOR_VERSION 0x0
+
+/* 83XX: Macros for scheduling dpc tasks */
+#define QLA83XX_NIC_CORE_RESET 0x1
+#define QLA83XX_IDC_STATE_HANDLER 0x2
+#define QLA83XX_NIC_CORE_UNRECOVERABLE 0x3
+
+/* 83XX: Macros for defining IDC-Control bits */
+#define QLA83XX_IDC_RESET_DISABLED BIT_0
+#define QLA83XX_IDC_GRACEFUL_RESET BIT_1
+
+/* 83XX: Macros for different timeouts */
+#define QLA83XX_IDC_INITIALIZATION_TIMEOUT 30
+#define QLA83XX_IDC_RESET_ACK_TIMEOUT 10
+#define QLA83XX_MAX_LOCK_RECOVERY_WAIT (2 * HZ)
+
+/* 83XX: Macros for defining class in DEV-Partition Info register */
+#define QLA83XX_CLASS_TYPE_NONE		0x0
+#define QLA83XX_CLASS_TYPE_NIC		0x1
+#define QLA83XX_CLASS_TYPE_FCOE		0x2
+#define QLA83XX_CLASS_TYPE_ISCSI	0x3
+
+/* 83XX: Macros for IDC Lock-Recovery stages */
+#define IDC_LOCK_RECOVERY_STAGE1	0x1 /* Stage1: Intent for
+					     * lock-recovery
+					     */
+#define IDC_LOCK_RECOVERY_STAGE2	0x2 /* Stage2: Perform lock-recovery */
+
+/* 83XX: Macros for IDC Audit type */
+#define IDC_AUDIT_TIMESTAMP		0x0 /* IDC-AUDIT: Record timestamp of
+					     * dev-state change to NEED-RESET
+					     * or NEED-QUIESCENT
+					     */
+#define IDC_AUDIT_COMPLETION		0x1 /* IDC-AUDIT: Record duration of
+					     * reset-recovery completion is
+					     * second
+					     */
+
 /*
  * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
  * 133Mhz slot.
@@ -596,6 +672,9 @@ typedef struct {
 #define MBA_DISCARD_RND_FRAME	0x8048	/* discard RND frame due to error. */
 #define MBA_REJECTED_FCP_CMD	0x8049	/* rejected FCP_CMD. */
 
+/* 83XX FCoE specific */
+#define MBA_IDC_AEN		0x8200  /* FCoE: NIC Core state change AEN */
+
 /* ISP mailbox loopback echo diagnostic error code */
 #define MBS_LB_RESET	0x17
 /*
@@ -2523,11 +2602,12 @@ struct qla_hw_data {
 		uint32_t	disable_msix_handshake	:1;
 		uint32_t	fcp_prio_enabled	:1;
 		uint32_t	isp82xx_fw_hung:1;
+		uint32_t	nic_core_hung:1;
 
 		uint32_t	quiesce_owner:1;
 		uint32_t	thermal_supported:1;
-		uint32_t	isp82xx_reset_hdlr_active:1;
-		uint32_t	isp82xx_reset_owner:1;
+		uint32_t	nic_core_reset_hdlr_active:1;
+		uint32_t	nic_core_reset_owner:1;
 		uint32_t	isp82xx_no_md_cap:1;
 		uint32_t	host_shutting_down:1;
 		/* 30 bits */
@@ -2912,8 +2992,8 @@ struct qla_hw_data {
 	unsigned long	mn_win_crb;
 	unsigned long	ms_win_crb;
 	int		qdr_sn_window;
-	uint32_t	nx_dev_init_timeout;
-	uint32_t	nx_reset_timeout;
+	uint32_t	fcoe_dev_init_timeout;
+	uint32_t	fcoe_reset_timeout;
 	rwlock_t	hw_lock;
 	uint16_t	portnum;		/* port number */
 	int		link_width;
@@ -2935,6 +3015,19 @@ struct qla_hw_data {
 	uint32_t	md_dump_size;
 
 	void		*loop_id_map;
+
+	/* QLA83XX IDC specific fields */
+	uint32_t	idc_audit_ts;
+
+	/* DPC low-priority workqueue */
+	struct workqueue_struct *dpc_lp_wq;
+	struct work_struct idc_aen;
+	/* DPC high-priority workqueue */
+	struct workqueue_struct *dpc_hp_wq;
+	struct work_struct nic_core_reset;
+	struct work_struct idc_state_handler;
+	struct work_struct nic_core_unrecoverable;
+
 	struct qlt_hw_data tgt;
 };
 

drivers/scsi/qla2xxx/qla_fw.h

@@ -1541,6 +1541,9 @@ struct access_chip_rsp_84xx {
  * ISP83xx mailbox commands
  */
 #define MBC_WRITE_REMOTE_REG		0x0001 /* Write remote register */
+#define MBC_READ_REMOTE_REG		0x0009 /* Read remote register */
+#define MBC_RESTART_NIC_FIRMWARE	0x003d /* Restart NIC firmware */
+#define MBC_SET_ACCESS_CONTROL		0x003e /* Access control command */
 
 /* Flash access control option field bit definitions */
 #define FAC_OPT_FORCE_SEMAPHORE		BIT_15

drivers/scsi/qla2xxx/qla_gbl.h

@@ -76,6 +76,13 @@ extern int qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *, fc_port_t *);
 
 extern fc_port_t *
 qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t );
+
+extern int __qla83xx_set_idc_control(scsi_qla_host_t *, uint32_t);
+extern int __qla83xx_get_idc_control(scsi_qla_host_t *, uint32_t *);
+extern void qla83xx_idc_audit(scsi_qla_host_t *, int);
+extern int qla83xx_nic_core_reset(scsi_qla_host_t *);
+extern void qla83xx_reset_ownership(scsi_qla_host_t *);
+
 /*
  * Global Data in qla_os.c source file.
  */
@@ -133,6 +140,20 @@ extern void qla2x00_relogin(struct scsi_qla_host *);
 extern void qla2x00_do_work(struct scsi_qla_host *);
 extern void qla2x00_free_fcports(struct scsi_qla_host *);
 
+extern void qla83xx_schedule_work(scsi_qla_host_t *, int);
+extern void qla83xx_service_idc_aen(struct work_struct *);
+extern void qla83xx_nic_core_unrecoverable_work(struct work_struct *);
+extern void qla83xx_idc_state_handler_work(struct work_struct *);
+extern void qla83xx_nic_core_reset_work(struct work_struct *);
+
+extern void qla83xx_idc_lock(scsi_qla_host_t *, uint16_t);
+extern void qla83xx_idc_unlock(scsi_qla_host_t *, uint16_t);
+extern int qla83xx_idc_state_handler(scsi_qla_host_t *);
+extern int qla83xx_set_drv_presence(scsi_qla_host_t *vha);
+extern int __qla83xx_set_drv_presence(scsi_qla_host_t *vha);
+extern int qla83xx_clear_drv_presence(scsi_qla_host_t *vha);
+extern int __qla83xx_clear_drv_presence(scsi_qla_host_t *vha);
+
 /*
  * Global Functions in qla_mid.c source file.
  */
@@ -421,7 +442,11 @@ extern void qla24xx_beacon_blink(struct scsi_qla_host *);
 extern void qla83xx_beacon_blink(struct scsi_qla_host *);
 extern int qla82xx_beacon_on(struct scsi_qla_host *);
 extern int qla82xx_beacon_off(struct scsi_qla_host *);
-extern int qla83xx_write_remote_reg(struct scsi_qla_host *, uint32_t, uint32_t);
+extern int qla83xx_wr_reg(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int qla83xx_rd_reg(scsi_qla_host_t *, uint32_t, uint32_t *);
+extern int qla83xx_restart_nic_firmware(scsi_qla_host_t *);
+extern int qla83xx_access_control(scsi_qla_host_t *, uint16_t, uint32_t,
+    uint32_t, uint16_t *);
 
 extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *,
     uint32_t, uint32_t);
@@ -582,6 +607,7 @@ extern uint32_t  qla82xx_wait_for_state_change(scsi_qla_host_t *, uint32_t);
 extern int qla82xx_idc_lock(struct qla_hw_data *);
 extern void qla82xx_idc_unlock(struct qla_hw_data *);
 extern int qla82xx_device_state_handler(scsi_qla_host_t *);
+extern void qla8xxx_dev_failed_handler(scsi_qla_host_t *);
 extern void qla82xx_clear_qsnt_ready(scsi_qla_host_t *);
 
 extern void qla2x00_set_model_info(scsi_qla_host_t *, uint8_t *,

drivers/scsi/qla2xxx/qla_init.c

@@ -429,6 +429,71 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 /*                QLogic ISP2x00 Hardware Support Functions.                */
 /****************************************************************************/
 
+int
+qla83xx_nic_core_fw_load(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t idc_major_ver, idc_minor_ver;
+
+	qla83xx_idc_lock(vha, 0);
+
+	/* SV: TODO: Assign initialization timeout from
+	 * flash-info / other param
+	 */
+	ha->fcoe_dev_init_timeout = QLA83XX_IDC_INITIALIZATION_TIMEOUT;
+	ha->fcoe_reset_timeout = QLA83XX_IDC_RESET_ACK_TIMEOUT;
+
+	/* Set our fcoe function presence */
+	if (__qla83xx_set_drv_presence(vha) != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_p3p, vha, 0xb077,
+		    "Error while setting DRV-Presence.\n");
+		rval = QLA_FUNCTION_FAILED;
+		goto exit;
+	}
+
+	/* Decide the reset ownership */
+	qla83xx_reset_ownership(vha);
+
+	/*
+	 * On first protocol driver load:
+	 * Init-Owner: Set IDC-Major-Version and Clear IDC-Lock-Recovery
+	 * register.
+	 * Others: Check compatibility with current IDC Major version.
+	 */
+	qla83xx_rd_reg(vha, QLA83XX_IDC_MAJOR_VERSION, &idc_major_ver);
+	if (ha->flags.nic_core_reset_owner) {
+		/* Set IDC Major version */
+		idc_major_ver = QLA83XX_SUPP_IDC_MAJOR_VERSION;
+		qla83xx_wr_reg(vha, QLA83XX_IDC_MAJOR_VERSION, idc_major_ver);
+
+		/* Clearing IDC-Lock-Recovery register */
+		qla83xx_wr_reg(vha, QLA83XX_IDC_LOCK_RECOVERY, 0);
+	} else if (idc_major_ver != QLA83XX_SUPP_IDC_MAJOR_VERSION) {
+		/*
+		 * Clear further IDC participation if we are not compatible with
+		 * the current IDC Major Version.
+		 */
+		ql_log(ql_log_warn, vha, 0xb07d,
+		    "Failing load, idc_major_ver=%d, expected_major_ver=%d.\n",
+		    idc_major_ver, QLA83XX_SUPP_IDC_MAJOR_VERSION);
+		__qla83xx_clear_drv_presence(vha);
+		rval = QLA_FUNCTION_FAILED;
+		goto exit;
+	}
+	/* Each function sets its supported Minor version. */
+	qla83xx_rd_reg(vha, QLA83XX_IDC_MINOR_VERSION, &idc_minor_ver);
+	idc_minor_ver |= (QLA83XX_SUPP_IDC_MINOR_VERSION << (ha->portnum * 2));
+	qla83xx_wr_reg(vha, QLA83XX_IDC_MINOR_VERSION, idc_minor_ver);
+
+	rval = qla83xx_idc_state_handler(vha);
+
+exit:
+	qla83xx_idc_unlock(vha, 0);
+
+	return rval;
+}
+
 /*
 * qla2x00_initialize_adapter
 *      Initialize board.
@@ -537,6 +602,14 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 		}
 	}
 
+	/* Load the NIC Core f/w if we are the first protocol driver. */
+	if (IS_QLA8031(ha)) {
+		rval = qla83xx_nic_core_fw_load(vha);
+		if (rval)
+			ql_log(ql_log_warn, vha, 0x0124,
+			    "Error in initializing NIC Core f/w.\n");
+	}
+
 	if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
 		qla24xx_read_fcp_prio_cfg(vha);
 
@@ -3736,6 +3809,307 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha)
 	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
 
+/* Assumes idc_lock always held on entry */
+void
+qla83xx_reset_ownership(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t drv_presence, drv_presence_mask;
+	uint32_t dev_part_info1, dev_part_info2, class_type;
+	uint32_t class_type_mask = 0x3;
+	uint16_t fcoe_other_function = 0xffff, i;
+
+	qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
+
+	qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO1, &dev_part_info1);
+	qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO2, &dev_part_info2);
+	for (i = 0; i < 8; i++) {
+		class_type = ((dev_part_info1 >> (i * 4)) & class_type_mask);
+		if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
+		    (i != ha->portnum)) {
+			fcoe_other_function = i;
+			break;
+		}
+	}
+	if (fcoe_other_function == 0xffff) {
+		for (i = 0; i < 8; i++) {
+			class_type = ((dev_part_info2 >> (i * 4)) &
+			    class_type_mask);
+			if ((class_type == QLA83XX_CLASS_TYPE_FCOE) &&
+			    ((i + 8) != ha->portnum)) {
+				fcoe_other_function = i + 8;
+				break;
+			}
+		}
+	}
+	/*
+	 * Prepare drv-presence mask based on fcoe functions present.
+	 * However consider only valid physical fcoe function numbers (0-15).
+	 */
+	drv_presence_mask = ~((1 << (ha->portnum)) |
+			((fcoe_other_function == 0xffff) ?
+			 0 : (1 << (fcoe_other_function))));
+
+	/* We are the reset owner iff:
+	 *    - No other protocol drivers present.
+	 *    - This is the lowest among fcoe functions. */
+	if (!(drv_presence & drv_presence_mask) &&
+			(ha->portnum < fcoe_other_function)) {
+		ql_dbg(ql_dbg_p3p, vha, 0xb07f,
+		    "This host is Reset owner.\n");
+		ha->flags.nic_core_reset_owner = 1;
+	}
+}
+
+int
+__qla83xx_set_drv_ack(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t drv_ack;
+
+	rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
+	if (rval == QLA_SUCCESS) {
+		drv_ack |= (1 << ha->portnum);
+		rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
+	}
+
+	return rval;
+}
+
+int
+qla83xx_set_drv_ack(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+
+	qla83xx_idc_lock(vha, 0);
+	rval = __qla83xx_set_drv_ack(vha);
+	qla83xx_idc_unlock(vha, 0);
+
+	return rval;
+}
+
+int
+__qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t drv_ack;
+
+	rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
+	if (rval == QLA_SUCCESS) {
+		drv_ack &= ~(1 << ha->portnum);
+		rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack);
+	}
+
+	return rval;
+}
+
+int
+qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+
+	qla83xx_idc_lock(vha, 0);
+	rval = __qla83xx_clear_drv_ack(vha);
+	qla83xx_idc_unlock(vha, 0);
+
+	return rval;
+}
+
+const char *
+qla83xx_dev_state_to_string(uint32_t dev_state)
+{
+	switch (dev_state) {
+	case QLA8XXX_DEV_COLD:
+		return "COLD/RE-INIT";
+	case QLA8XXX_DEV_INITIALIZING:
+		return "INITIALIZING";
+	case QLA8XXX_DEV_READY:
+		return "READY";
+	case QLA8XXX_DEV_NEED_RESET:
+		return "NEED RESET";
+	case QLA8XXX_DEV_NEED_QUIESCENT:
+		return "NEED QUIESCENT";
+	case QLA8XXX_DEV_FAILED:
+		return "FAILED";
+	case QLA8XXX_DEV_QUIESCENT:
+		return "QUIESCENT";
+	default:
+		return "Unknown";
+	}
+}
+
+/* Assumes idc-lock always held on entry */
+void
+qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t idc_audit_reg = 0, duration_secs = 0;
+
+	switch (audit_type) {
+	case IDC_AUDIT_TIMESTAMP:
+		ha->idc_audit_ts = (jiffies_to_msecs(jiffies) / 1000);
+		idc_audit_reg = (ha->portnum) |
+		    (IDC_AUDIT_TIMESTAMP << 7) | (ha->idc_audit_ts << 8);
+		qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
+		break;
+
+	case IDC_AUDIT_COMPLETION:
+		duration_secs = ((jiffies_to_msecs(jiffies) -
+		    jiffies_to_msecs(ha->idc_audit_ts)) / 1000);
+		idc_audit_reg = (ha->portnum) |
+		    (IDC_AUDIT_COMPLETION << 7) | (duration_secs << 8);
+		qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg);
+		break;
+
+	default:
+		ql_log(ql_log_warn, vha, 0xb078,
+		    "Invalid audit type specified.\n");
+		break;
+	}
+}
+
+/* Assumes idc_lock always held on entry */
+int
+qla83xx_initiating_reset(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t  idc_control, dev_state;
+
+	__qla83xx_get_idc_control(vha, &idc_control);
+	if ((idc_control & QLA83XX_IDC_RESET_DISABLED)) {
+		ql_log(ql_log_info, vha, 0xb080,
+		    "NIC Core reset has been disabled. idc-control=0x%x\n",
+		    idc_control);
+		return QLA_FUNCTION_FAILED;
+	}
+
+	/* Set NEED-RESET iff in READY state and we are the reset-owner */
+	qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
+	if (ha->flags.nic_core_reset_owner && dev_state == QLA8XXX_DEV_READY) {
+		qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE,
+		    QLA8XXX_DEV_NEED_RESET);
+		ql_log(ql_log_info, vha, 0xb056, "HW State: NEED RESET.\n");
+		qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
+	} else {
+		const char *state = qla83xx_dev_state_to_string(dev_state);
+		ql_log(ql_log_info, vha, 0xb057, "HW State: %s.\n", state);
+
+		/* SV: XXX: Is timeout required here? */
+		/* Wait for IDC state change READY -> NEED_RESET */
+		while (dev_state == QLA8XXX_DEV_READY) {
+			qla83xx_idc_unlock(vha, 0);
+			msleep(200);
+			qla83xx_idc_lock(vha, 0);
+			qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state);
+		}
+	}
+
+	/* Send IDC ack by writing to drv-ack register */
+	__qla83xx_set_drv_ack(vha);
+
+	return QLA_SUCCESS;
+}
+
+int
+__qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
+{
+	return qla83xx_wr_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
+}
+
+int
+qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
+{
+	int rval = QLA_SUCCESS;
+
+	qla83xx_idc_lock(vha, 0);
+	rval = __qla83xx_set_idc_control(vha, idc_control);
+	qla83xx_idc_unlock(vha, 0);
+
+	return rval;
+}
+
+int
+__qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
+{
+	return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
+}
+
+int
+qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
+{
+	int rval = QLA_SUCCESS;
+
+	qla83xx_idc_lock(vha, 0);
+	rval = __qla83xx_get_idc_control(vha, idc_control);
+	qla83xx_idc_unlock(vha, 0);
+
+	return rval;
+}
+
+int
+qla83xx_check_driver_presence(scsi_qla_host_t *vha)
+{
+	uint32_t drv_presence = 0;
+	struct qla_hw_data *ha = vha->hw;
+
+	qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
+	if (drv_presence & (1 << ha->portnum))
+		return QLA_SUCCESS;
+	else
+		return QLA_TEST_FAILED;
+}
+
+int
+qla83xx_nic_core_reset(scsi_qla_host_t *vha)
+{
+	int rval = QLA_SUCCESS;
+	struct qla_hw_data *ha = vha->hw;
+
+	ql_dbg(ql_dbg_p3p, vha, 0xb058,
+	    "Entered  %s().\n", __func__);
+
+	if (vha->device_flags & DFLG_DEV_FAILED) {
+		ql_log(ql_log_warn, vha, 0xb059,
+		    "Device in unrecoverable FAILED state.\n");
+		return QLA_FUNCTION_FAILED;
+	}
+
+	qla83xx_idc_lock(vha, 0);
+
+	if (qla83xx_check_driver_presence(vha) != QLA_SUCCESS) {
+		ql_log(ql_log_warn, vha, 0xb05a,
+		    "Function=0x%x has been removed from IDC participation.\n",
+		    ha->portnum);
+		rval = QLA_FUNCTION_FAILED;
+		goto exit;
+	}
+
+	qla83xx_reset_ownership(vha);
+
+	rval = qla83xx_initiating_reset(vha);
+
+	/*
+	 * Perform reset if we are the reset-owner,
+	 * else wait till IDC state changes to READY/FAILED.
+	 */
+	if (rval == QLA_SUCCESS) {
+		rval = qla83xx_idc_state_handler(vha);
+
+		if (rval == QLA_SUCCESS)
+			ha->flags.nic_core_hung = 0;
+		__qla83xx_clear_drv_ack(vha);
+	}
+
+exit:
+	qla83xx_idc_unlock(vha, 0);
+
+	ql_dbg(ql_dbg_p3p, vha, 0xb05b, "Exiting %s.\n", __func__);
+
+	return rval;
+}
+
 /*
 * qla82xx_quiescent_state_cleanup
 * Description: This function will block the new I/Os
@@ -3871,6 +4245,14 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 	struct req_que *req = ha->req_q_map[0];
 	unsigned long flags;
 
+	if (IS_QLA8031(ha)) {
+		ql_dbg(ql_dbg_p3p, vha, 0xb05c,
+		    "Clearing fcoe driver presence.\n");
+		if (qla83xx_clear_drv_presence(vha) != QLA_SUCCESS)
+			ql_dbg(ql_dbg_p3p, vha, 0xb073,
+			    "Erro while clearing DRV-Presence.\n");
+	}
+
 	if (vha->flags.online) {
 		qla2x00_abort_isp_cleanup(vha);
 
@@ -3982,6 +4364,13 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 		}
 		spin_unlock_irqrestore(&ha->vport_slock, flags);
 
+		if (IS_QLA8031(ha)) {
+			ql_dbg(ql_dbg_p3p, vha, 0xb05d,
+			    "Setting back fcoe driver presence.\n");
+			if (qla83xx_set_drv_presence(vha) != QLA_SUCCESS)
+				ql_dbg(ql_dbg_p3p, vha, 0xb074,
+				    "Error while setting DRV-Presence.\n");
+		}
 	} else {
 		ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n",
 		       __func__);

drivers/scsi/qla2xxx/qla_isr.c

@@ -332,6 +332,166 @@ qla2x00_get_link_speed_str(struct qla_hw_data *ha)
 	return link_speed;
 }
 
+void
+qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	struct qla_hw_data *ha = vha->hw;
+
+	/*
+	 * 8200 AEN Interpretation:
+	 * mb[0] = AEN code
+	 * mb[1] = AEN Reason code
+	 * mb[2] = LSW of Peg-Halt Status-1 Register
+	 * mb[6] = MSW of Peg-Halt Status-1 Register
+	 * mb[3] = LSW of Peg-Halt Status-2 register
+	 * mb[7] = MSW of Peg-Halt Status-2 register
+	 * mb[4] = IDC Device-State Register value
+	 * mb[5] = IDC Driver-Presence Register value
+	 */
+	ql_dbg(ql_dbg_async, vha, 0x506b, "AEN Code: mb[0] = 0x%x AEN reason: "
+	    "mb[1] = 0x%x PH-status1: mb[2] = 0x%x PH-status1: mb[6] = 0x%x.\n",
+	    mb[0], mb[1], mb[2], mb[6]);
+	ql_dbg(ql_dbg_async, vha, 0x506c, "PH-status2: mb[3] = 0x%x "
+	    "PH-status2: mb[7] = 0x%x Device-State: mb[4] = 0x%x "
+	    "Drv-Presence: mb[5] = 0x%x.\n", mb[3], mb[7], mb[4], mb[5]);
+
+	if (mb[1] & (IDC_PEG_HALT_STATUS_CHANGE | IDC_NIC_FW_REPORTED_FAILURE |
+				IDC_HEARTBEAT_FAILURE)) {
+		ha->flags.nic_core_hung = 1;
+		ql_log(ql_log_warn, vha, 0x5060,
+		    "83XX: F/W Error Reported: Check if reset required.\n");
+
+		if (mb[1] & IDC_PEG_HALT_STATUS_CHANGE) {
+			uint32_t protocol_engine_id, fw_err_code, err_level;
+
+			/*
+			 * IDC_PEG_HALT_STATUS_CHANGE interpretation:
+			 *  - PEG-Halt Status-1 Register:
+			 *	(LSW = mb[2], MSW = mb[6])
+			 *	Bits 0-7   = protocol-engine ID
+			 *	Bits 8-28  = f/w error code
+			 *	Bits 29-31 = Error-level
+			 *	    Error-level 0x1 = Non-Fatal error
+			 *	    Error-level 0x2 = Recoverable Fatal error
+			 *	    Error-level 0x4 = UnRecoverable Fatal error
+			 *  - PEG-Halt Status-2 Register:
+			 *	(LSW = mb[3], MSW = mb[7])
+			 */
+			protocol_engine_id = (mb[2] & 0xff);
+			fw_err_code = (((mb[2] & 0xff00) >> 8) |
+			    ((mb[6] & 0x1fff) << 8));
+			err_level = ((mb[6] & 0xe000) >> 13);
+			ql_log(ql_log_warn, vha, 0x5061, "PegHalt Status-1 "
+			    "Register: protocol_engine_id=0x%x "
+			    "fw_err_code=0x%x err_level=0x%x.\n",
+			    protocol_engine_id, fw_err_code, err_level);
+			ql_log(ql_log_warn, vha, 0x5062, "PegHalt Status-2 "
+			    "Register: 0x%x%x.\n", mb[7], mb[3]);
+			if (err_level == ERR_LEVEL_NON_FATAL) {
+				ql_log(ql_log_warn, vha, 0x5063,
+				    "Not a fatal error, f/w has recovered "
+				    "iteself.\n");
+			} else if (err_level == ERR_LEVEL_RECOVERABLE_FATAL) {
+				ql_log(ql_log_fatal, vha, 0x5064,
+				    "Recoverable Fatal error: Chip reset "
+				    "required.\n");
+				qla83xx_schedule_work(vha,
+				    QLA83XX_NIC_CORE_RESET);
+			} else if (err_level == ERR_LEVEL_UNRECOVERABLE_FATAL) {
+				ql_log(ql_log_fatal, vha, 0x5065,
+				    "Unrecoverable Fatal error: Set FAILED "
+				    "state, reboot required.\n");
+				qla83xx_schedule_work(vha,
+				    QLA83XX_NIC_CORE_UNRECOVERABLE);
+			}
+		}
+
+		if (mb[1] & IDC_NIC_FW_REPORTED_FAILURE) {
+			uint16_t peg_fw_state, nw_interface_link_up;
+			uint16_t nw_interface_signal_detect, sfp_status;
+			uint16_t htbt_counter, htbt_monitor_enable;
+			uint16_t sfp_additonal_info, sfp_multirate;
+			uint16_t sfp_tx_fault, link_speed, dcbx_status;
+
+			/*
+			 * IDC_NIC_FW_REPORTED_FAILURE interpretation:
+			 *  - PEG-to-FC Status Register:
+			 *	(LSW = mb[2], MSW = mb[6])
+			 *	Bits 0-7   = Peg-Firmware state
+			 *	Bit 8      = N/W Interface Link-up
+			 *	Bit 9      = N/W Interface signal detected
+			 *	Bits 10-11 = SFP Status
+			 *	  SFP Status 0x0 = SFP+ transceiver not expected
+			 *	  SFP Status 0x1 = SFP+ transceiver not present
+			 *	  SFP Status 0x2 = SFP+ transceiver invalid
+			 *	  SFP Status 0x3 = SFP+ transceiver present and
+			 *	  valid
+			 *	Bits 12-14 = Heartbeat Counter
+			 *	Bit 15     = Heartbeat Monitor Enable
+			 *	Bits 16-17 = SFP Additional Info
+			 *	  SFP info 0x0 = Unregocnized transceiver for
+			 *	  Ethernet
+			 *	  SFP info 0x1 = SFP+ brand validation failed
+			 *	  SFP info 0x2 = SFP+ speed validation failed
+			 *	  SFP info 0x3 = SFP+ access error
+			 *	Bit 18     = SFP Multirate
+			 *	Bit 19     = SFP Tx Fault
+			 *	Bits 20-22 = Link Speed
+			 *	Bits 23-27 = Reserved
+			 *	Bits 28-30 = DCBX Status
+			 *	  DCBX Status 0x0 = DCBX Disabled
+			 *	  DCBX Status 0x1 = DCBX Enabled
+			 *	  DCBX Status 0x2 = DCBX Exchange error
+			 *	Bit 31     = Reserved
+			 */
+			peg_fw_state = (mb[2] & 0x00ff);
+			nw_interface_link_up = ((mb[2] & 0x0100) >> 8);
+			nw_interface_signal_detect = ((mb[2] & 0x0200) >> 9);
+			sfp_status = ((mb[2] & 0x0c00) >> 10);
+			htbt_counter = ((mb[2] & 0x7000) >> 12);
+			htbt_monitor_enable = ((mb[2] & 0x8000) >> 15);
+			sfp_additonal_info = (mb[6] & 0x0003);
+			sfp_multirate = ((mb[6] & 0x0004) >> 2);
+			sfp_tx_fault = ((mb[6] & 0x0008) >> 3);
+			link_speed = ((mb[6] & 0x0070) >> 4);
+			dcbx_status = ((mb[6] & 0x7000) >> 12);
+
+			ql_log(ql_log_warn, vha, 0x5066,
+			    "Peg-to-Fc Status Register:\n"
+			    "peg_fw_state=0x%x, nw_interface_link_up=0x%x, "
+			    "nw_interface_signal_detect=0x%x"
+			    "\nsfp_statis=0x%x.\n ", peg_fw_state,
+			    nw_interface_link_up, nw_interface_signal_detect,
+			    sfp_status);
+			ql_log(ql_log_warn, vha, 0x5067,
+			    "htbt_counter=0x%x, htbt_monitor_enable=0x%x, "
+			    "sfp_additonal_info=0x%x, sfp_multirate=0x%x.\n ",
+			    htbt_counter, htbt_monitor_enable,
+			    sfp_additonal_info, sfp_multirate);
+			ql_log(ql_log_warn, vha, 0x5068,
+			    "sfp_tx_fault=0x%x, link_state=0x%x, "
+			    "dcbx_status=0x%x.\n", sfp_tx_fault, link_speed,
+			    dcbx_status);
+
+			qla83xx_schedule_work(vha, QLA83XX_NIC_CORE_RESET);
+		}
+
+		if (mb[1] & IDC_HEARTBEAT_FAILURE) {
+			ql_log(ql_log_warn, vha, 0x5069,
+			    "Heartbeat Failure encountered, chip reset "
+			    "required.\n");
+
+			qla83xx_schedule_work(vha, QLA83XX_NIC_CORE_RESET);
+		}
+	}
+
+	if (mb[1] & IDC_DEVICE_STATE_CHANGE) {
+		ql_log(ql_log_info, vha, 0x506a,
+		    "IDC Device-State changed = 0x%x.\n", mb[4]);
+		qla83xx_schedule_work(vha, MBA_IDC_AEN);
+	}
+}
+
 /**
  * qla2x00_async_event() - Process aynchronous events.
  * @ha: SCSI driver HA context
@@ -825,8 +985,18 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 	case MBA_IDC_COMPLETE:
 	case MBA_IDC_NOTIFY:
 	case MBA_IDC_TIME_EXT:
+		if (IS_QLA81XX(vha->hw))
 			qla81xx_idc_event(vha, mb[0], mb[1]);
 		break;
+
+	case MBA_IDC_AEN:
+		mb[4] = RD_REG_WORD(&reg24->mailbox4);
+		mb[5] = RD_REG_WORD(&reg24->mailbox5);
+		mb[6] = RD_REG_WORD(&reg24->mailbox6);
+		mb[7] = RD_REG_WORD(&reg24->mailbox7);
+		qla83xx_handle_8200_aen(vha, mb);
+		break;
+
 	default:
 		ql_dbg(ql_dbg_async, vha, 0x5057,
 		    "Unknown AEN:%04x %04x %04x %04x\n",
@@ -2301,7 +2471,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 	unsigned long	iter;
 	uint32_t	stat;
 	uint32_t	hccr;
-	uint16_t	mb[4];
+	uint16_t	mb[8];
 	struct rsp_que *rsp;
 	unsigned long	flags;
 
@@ -2457,7 +2627,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 	int		status;
 	uint32_t	stat;
 	uint32_t	hccr;
-	uint16_t	mb[4];
+	uint16_t	mb[8];
 	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;

drivers/scsi/qla2xxx/qla_mbx.c

@@ -75,7 +75,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
-	if (ha->flags.isp82xx_fw_hung) {
+	if (IS_QLA82XX(ha) && ha->flags.isp82xx_fw_hung) {
 		/* Setting Link-Down error */
 		mcp->mb[0] = MBS_LINK_DOWN_ERROR;
 		ql_log(ql_log_warn, vha, 0x1004,
@@ -232,7 +232,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		ha->flags.mbox_int = 0;
 		clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
 
-		if (ha->flags.isp82xx_fw_hung) {
+		if ((IS_QLA82XX(ha) && ha->flags.isp82xx_fw_hung)) {
 			ha->flags.mbox_busy = 0;
 			/* Setting Link-Down error */
 			mcp->mb[0] = MBS_LINK_DOWN_ERROR;
@@ -4741,7 +4741,7 @@ qla82xx_mbx_beacon_ctl(scsi_qla_host_t *vha, int enable)
 }
 
 int
-qla83xx_write_remote_reg(scsi_qla_host_t *vha, uint32_t reg, uint32_t data)
+qla83xx_wr_reg(scsi_qla_host_t *vha, uint32_t reg, uint32_t data)
 {
 	int rval;
 	struct qla_hw_data *ha = vha->hw;
@@ -4814,3 +4814,139 @@ qla2x00_port_logout(scsi_qla_host_t *vha, struct fc_port *fcport)
 	return rval;
 }
 
+int
+qla83xx_rd_reg(scsi_qla_host_t *vha, uint32_t reg, uint32_t *data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+	unsigned long retry_max_time = jiffies + (2 * HZ);
+
+	if (!IS_QLA83XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x114b, "Entered %s.\n", __func__);
+
+retry_rd_reg:
+	mcp->mb[0] = MBC_READ_REMOTE_REG;
+	mcp->mb[1] = LSW(reg);
+	mcp->mb[2] = MSW(reg);
+	mcp->out_mb = MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x114c,
+		    "Failed=%x mb[0]=%x mb[1]=%x.\n",
+		    rval, mcp->mb[0], mcp->mb[1]);
+	} else {
+		*data = (mcp->mb[3] | (mcp->mb[4] << 16));
+		if (*data == QLA8XXX_BAD_VALUE) {
+			/*
+			 * During soft-reset CAMRAM register reads might
+			 * return 0xbad0bad0. So retry for MAX of 2 sec
+			 * while reading camram registers.
+			 */
+			if (time_after(jiffies, retry_max_time)) {
+				ql_dbg(ql_dbg_mbx, vha, 0x1141,
+				    "Failure to read CAMRAM register. "
+				    "data=0x%x.\n", *data);
+				return QLA_FUNCTION_FAILED;
+			}
+			msleep(100);
+			goto retry_rd_reg;
+		}
+		ql_dbg(ql_dbg_mbx, vha, 0x1142, "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
+int
+qla83xx_restart_nic_firmware(scsi_qla_host_t *vha)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA83XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x1143, "Entered %s.\n", __func__);
+
+	mcp->mb[0] = MBC_RESTART_NIC_FIRMWARE;
+	mcp->out_mb = MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1144,
+		    "Failed=%x mb[0]=%x mb[1]=%x.\n",
+		    rval, mcp->mb[0], mcp->mb[1]);
+		ha->isp_ops->fw_dump(vha, 0);
+	} else {
+		ql_dbg(ql_dbg_mbx, vha, 0x1145, "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
+int
+qla83xx_access_control(scsi_qla_host_t *vha, uint16_t options,
+	uint32_t start_addr, uint32_t end_addr, uint16_t *sector_size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	uint8_t subcode = (uint8_t)options;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA8031(ha))
+		return QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x1146, "Entered %s.\n", __func__);
+
+	mcp->mb[0] = MBC_SET_ACCESS_CONTROL;
+	mcp->mb[1] = options;
+	mcp->out_mb = MBX_1|MBX_0;
+	if (subcode & BIT_2) {
+		mcp->mb[2] = LSW(start_addr);
+		mcp->mb[3] = MSW(start_addr);
+		mcp->mb[4] = LSW(end_addr);
+		mcp->mb[5] = MSW(end_addr);
+		mcp->out_mb |= MBX_5|MBX_4|MBX_3|MBX_2;
+	}
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	if (!(subcode & (BIT_2 | BIT_5)))
+		mcp->in_mb |= MBX_4|MBX_3;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1147,
+		    "Failed=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[3]=%x mb[4]=%x.\n",
+		    rval, mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3],
+		    mcp->mb[4]);
+		ha->isp_ops->fw_dump(vha, 0);
+	} else {
+		if (subcode & BIT_5)
+			*sector_size = mcp->mb[1];
+		else if (subcode & (BIT_6 | BIT_7)) {
+			ql_dbg(ql_dbg_mbx, vha, 0x1148,
+			    "Driver-lock id=%x%x", mcp->mb[4], mcp->mb[3]);
+		} else if (subcode & (BIT_3 | BIT_4)) {
+			ql_dbg(ql_dbg_mbx, vha, 0x1149,
+			    "Flash-lock id=%x%x", mcp->mb[4], mcp->mb[3]);
+		}
+		ql_dbg(ql_dbg_mbx, vha, 0x114a, "Done %s.\n", __func__);
+	}
+
+	return rval;
+}

drivers/scsi/qla2xxx/qla_nx.c

@@ -2355,7 +2355,7 @@ qla82xx_need_reset(struct qla_hw_data *ha)
 	uint32_t drv_state;
 	int rval;
 
-	if (ha->flags.isp82xx_reset_owner)
+	if (ha->flags.nic_core_reset_owner)
 		return 1;
 	else {
 		drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
@@ -2864,7 +2864,7 @@ qla82xx_device_bootstrap(scsi_qla_host_t *vha)
 		timeout = msleep_interruptible(200);
 		if (timeout) {
 			qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
-				QLA82XX_DEV_FAILED);
+				QLA8XXX_DEV_FAILED);
 			return QLA_FUNCTION_FAILED;
 		}
 
@@ -2895,7 +2895,7 @@ qla82xx_device_bootstrap(scsi_qla_host_t *vha)
 	/* set to DEV_INITIALIZING */
 	ql_log(ql_log_info, vha, 0x009e,
 	    "HW State: INITIALIZING.\n");
-	qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_INITIALIZING);
+	qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA8XXX_DEV_INITIALIZING);
 
 	/* Driver that sets device state to initializating sets IDC version */
 	qla82xx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, QLA82XX_IDC_VERSION);
@@ -2908,14 +2908,14 @@ qla82xx_device_bootstrap(scsi_qla_host_t *vha)
 		ql_log(ql_log_fatal, vha, 0x00ad,
 		    "HW State: FAILED.\n");
 		qla82xx_clear_drv_active(ha);
-		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_FAILED);
+		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA8XXX_DEV_FAILED);
 		return rval;
 	}
 
 dev_ready:
 	ql_log(ql_log_info, vha, 0x00ae,
 	    "HW State: READY.\n");
-	qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY);
+	qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA8XXX_DEV_READY);
 
 	return QLA_SUCCESS;
 }
@@ -2964,7 +2964,7 @@ qla82xx_need_qsnt_handler(scsi_qla_host_t *vha)
 			    "DRV_STATE:%d.\n", QLA2XXX_DRIVER_NAME,
 			    drv_active, drv_state);
 			qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
-			    QLA82XX_DEV_READY);
+			    QLA8XXX_DEV_READY);
 			ql_log(ql_log_info, vha, 0xb025,
 			    "HW State: DEV_READY.\n");
 			qla82xx_idc_unlock(ha);
@@ -2985,10 +2985,10 @@ qla82xx_need_qsnt_handler(scsi_qla_host_t *vha)
 	}
 	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
 	/* everyone acked so set the state to DEV_QUIESCENCE */
-	if (dev_state == QLA82XX_DEV_NEED_QUIESCENT) {
+	if (dev_state == QLA8XXX_DEV_NEED_QUIESCENT) {
 		ql_log(ql_log_info, vha, 0xb026,
 		    "HW State: DEV_QUIESCENT.\n");
-		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_QUIESCENT);
+		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA8XXX_DEV_QUIESCENT);
 	}
 }
 
@@ -3018,8 +3018,8 @@ qla82xx_wait_for_state_change(scsi_qla_host_t *vha, uint32_t curr_state)
 	return dev_state;
 }
 
-static void
-qla82xx_dev_failed_handler(scsi_qla_host_t *vha)
+void
+qla8xxx_dev_failed_handler(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 
@@ -3067,7 +3067,7 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 	}
 
 	drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
-	if (!ha->flags.isp82xx_reset_owner) {
+	if (!ha->flags.nic_core_reset_owner) {
 		ql_dbg(ql_dbg_p3p, vha, 0xb028,
 		    "reset_acknowledged by 0x%x\n", ha->portnum);
 		qla82xx_set_rst_ready(ha);
@@ -3079,7 +3079,7 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 	}
 
 	/* wait for 10 seconds for reset ack from all functions */
-	reset_timeout = jiffies + (ha->nx_reset_timeout * HZ);
+	reset_timeout = jiffies + (ha->fcoe_reset_timeout * HZ);
 
 	drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
 	drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
@@ -3091,7 +3091,7 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 	    drv_state, drv_active, dev_state, active_mask);
 
 	while (drv_state != drv_active &&
-	    dev_state != QLA82XX_DEV_INITIALIZING) {
+	    dev_state != QLA8XXX_DEV_INITIALIZING) {
 		if (time_after_eq(jiffies, reset_timeout)) {
 			ql_log(ql_log_warn, vha, 0x00b5,
 			    "Reset timeout.\n");
@@ -3102,7 +3102,7 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 		qla82xx_idc_lock(ha);
 		drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
 		drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
-		if (ha->flags.isp82xx_reset_owner)
+		if (ha->flags.nic_core_reset_owner)
 			drv_active &= active_mask;
 		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
 	}
@@ -3118,11 +3118,11 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 	    dev_state < MAX_STATES ? qdev_state(dev_state) : "Unknown");
 
 	/* Force to DEV_COLD unless someone else is starting a reset */
-	if (dev_state != QLA82XX_DEV_INITIALIZING &&
-	    dev_state != QLA82XX_DEV_COLD) {
+	if (dev_state != QLA8XXX_DEV_INITIALIZING &&
+	    dev_state != QLA8XXX_DEV_COLD) {
 		ql_log(ql_log_info, vha, 0x00b7,
 		    "HW State: COLD/RE-INIT.\n");
-		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD);
+		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA8XXX_DEV_COLD);
 		qla82xx_set_rst_ready(ha);
 		if (ql2xmdenable) {
 			if (qla82xx_md_collect(vha))
@@ -3240,7 +3240,7 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 	    dev_state < MAX_STATES ? qdev_state(dev_state) : "Unknown");
 
 	/* wait for 30 seconds for device to go ready */
-	dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ);
+	dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout * HZ);
 
 	while (1) {
 
@@ -3264,18 +3264,18 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 		}
 
 		switch (dev_state) {
-		case QLA82XX_DEV_READY:
-			ha->flags.isp82xx_reset_owner = 0;
+		case QLA8XXX_DEV_READY:
+			ha->flags.nic_core_reset_owner = 0;
 			goto rel_lock;
-		case QLA82XX_DEV_COLD:
+		case QLA8XXX_DEV_COLD:
 			rval = qla82xx_device_bootstrap(vha);
 			break;
-		case QLA82XX_DEV_INITIALIZING:
+		case QLA8XXX_DEV_INITIALIZING:
 			qla82xx_idc_unlock(ha);
 			msleep(1000);
 			qla82xx_idc_lock(ha);
 			break;
-		case QLA82XX_DEV_NEED_RESET:
+		case QLA8XXX_DEV_NEED_RESET:
 			if (!ql2xdontresethba)
 				qla82xx_need_reset_handler(vha);
 			else {
@@ -3284,15 +3284,15 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 				qla82xx_idc_lock(ha);
 			}
 			dev_init_timeout = jiffies +
-			    (ha->nx_dev_init_timeout * HZ);
+			    (ha->fcoe_dev_init_timeout * HZ);
 			break;
-		case QLA82XX_DEV_NEED_QUIESCENT:
+		case QLA8XXX_DEV_NEED_QUIESCENT:
 			qla82xx_need_qsnt_handler(vha);
 			/* Reset timeout value after quiescence handler */
-			dev_init_timeout = jiffies + (ha->nx_dev_init_timeout\
+			dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout\
 							 * HZ);
 			break;
-		case QLA82XX_DEV_QUIESCENT:
+		case QLA8XXX_DEV_QUIESCENT:
 			/* Owner will exit and other will wait for the state
 			 * to get changed
 			 */
@@ -3304,11 +3304,11 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			qla82xx_idc_lock(ha);
 
 			/* Reset timeout value after quiescence handler */
-			dev_init_timeout = jiffies + (ha->nx_dev_init_timeout\
+			dev_init_timeout = jiffies + (ha->fcoe_dev_init_timeout\
 							 * HZ);
 			break;
-		case QLA82XX_DEV_FAILED:
-			qla82xx_dev_failed_handler(vha);
+		case QLA8XXX_DEV_FAILED:
+			qla8xxx_dev_failed_handler(vha);
 			rval = QLA_FUNCTION_FAILED;
 			goto exit;
 		default:
@@ -3368,23 +3368,23 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 	struct qla_hw_data *ha = vha->hw;
 
 	/* don't poll if reset is going on */
-	if (!ha->flags.isp82xx_reset_hdlr_active) {
+	if (!ha->flags.nic_core_reset_hdlr_active) {
 		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
 		if (qla82xx_check_temp(vha)) {
 			set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags);
 			ha->flags.isp82xx_fw_hung = 1;
 			qla82xx_clear_pending_mbx(vha);
-		} else if (dev_state == QLA82XX_DEV_NEED_RESET &&
+		} else if (dev_state == QLA8XXX_DEV_NEED_RESET &&
 		    !test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) {
 			ql_log(ql_log_warn, vha, 0x6001,
 			    "Adapter reset needed.\n");
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
+		} else if (dev_state == QLA8XXX_DEV_NEED_QUIESCENT &&
 			!test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags)) {
 			ql_log(ql_log_warn, vha, 0x6002,
 			    "Quiescent needed.\n");
 			set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
-		} else if (dev_state == QLA82XX_DEV_FAILED &&
+		} else if (dev_state == QLA8XXX_DEV_FAILED &&
 			!test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) &&
 			vha->flags.online == 1) {
 			ql_log(ql_log_warn, vha, 0xb055,
@@ -3453,12 +3453,12 @@ qla82xx_set_reset_owner(scsi_qla_host_t *vha)
 	uint32_t dev_state;
 
 	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-	if (dev_state == QLA82XX_DEV_READY) {
+	if (dev_state == QLA8XXX_DEV_READY) {
 		ql_log(ql_log_info, vha, 0xb02f,
 		    "HW State: NEED RESET\n");
 		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
-			QLA82XX_DEV_NEED_RESET);
-		ha->flags.isp82xx_reset_owner = 1;
+			QLA8XXX_DEV_NEED_RESET);
+		ha->flags.nic_core_reset_owner = 1;
 		ql_dbg(ql_dbg_p3p, vha, 0xb030,
 		    "reset_owner is 0x%x\n", ha->portnum);
 	} else
@@ -3489,7 +3489,7 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 		    "Device in failed state, exiting.\n");
 		return QLA_SUCCESS;
 	}
-	ha->flags.isp82xx_reset_hdlr_active = 1;
+	ha->flags.nic_core_reset_hdlr_active = 1;
 
 	qla82xx_idc_lock(ha);
 	qla82xx_set_reset_owner(vha);
@@ -3503,7 +3503,7 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 
 	if (rval == QLA_SUCCESS) {
 		ha->flags.isp82xx_fw_hung = 0;
-		ha->flags.isp82xx_reset_hdlr_active = 0;
+		ha->flags.nic_core_reset_hdlr_active = 0;
 		qla82xx_restart_isp(vha);
 	}
 

drivers/scsi/qla2xxx/qla_nx.h

@@ -542,14 +542,15 @@
 #define QLA82XX_CRB_DRV_IDC_VERSION  (QLA82XX_CAM_RAM(0x174))
 
 /* Every driver should use these Device State */
-#define QLA82XX_DEV_COLD		1
-#define QLA82XX_DEV_INITIALIZING	2
-#define QLA82XX_DEV_READY		3
-#define QLA82XX_DEV_NEED_RESET		4
-#define QLA82XX_DEV_NEED_QUIESCENT	5
-#define QLA82XX_DEV_FAILED		6
-#define QLA82XX_DEV_QUIESCENT		7
+#define QLA8XXX_DEV_COLD		1
+#define QLA8XXX_DEV_INITIALIZING	2
+#define QLA8XXX_DEV_READY		3
+#define QLA8XXX_DEV_NEED_RESET		4
+#define QLA8XXX_DEV_NEED_QUIESCENT	5
+#define QLA8XXX_DEV_FAILED		6
+#define QLA8XXX_DEV_QUIESCENT		7
 #define	MAX_STATES			8 /* Increment if new state added */
+#define QLA8XXX_BAD_VALUE		0xbad0bad0
 
 #define QLA82XX_IDC_VERSION			1
 #define QLA82XX_ROM_DEV_INIT_TIMEOUT		30

drivers/scsi/qla2xxx/qla_sup.c

@@ -966,16 +966,16 @@ qla2xxx_get_idc_param(scsi_qla_host_t *vha)
 		QLA82XX_IDC_PARAM_ADDR , 8);
 
 	if (*wptr == __constant_cpu_to_le32(0xffffffff)) {
-		ha->nx_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
-		ha->nx_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
+		ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
+		ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
 	} else {
-		ha->nx_dev_init_timeout = le32_to_cpu(*wptr++);
-		ha->nx_reset_timeout = le32_to_cpu(*wptr);
+		ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr++);
+		ha->fcoe_reset_timeout = le32_to_cpu(*wptr);
 	}
 	ql_dbg(ql_dbg_init, vha, 0x004e,
-	    "nx_dev_init_timeout=%d "
-	    "nx_reset_timeout=%d.\n", ha->nx_dev_init_timeout,
-	    ha->nx_reset_timeout);
+	    "fcoe_dev_init_timeout=%d "
+	    "fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout,
+	    ha->fcoe_reset_timeout);
 	return;
 }
 
@@ -1017,7 +1017,7 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 	    !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha))
 		return;
 
-	if (ha->flags.isp82xx_reset_hdlr_active)
+	if (ha->flags.nic_core_reset_hdlr_active)
 		return;
 
 	ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr,
@@ -1675,15 +1675,15 @@ qla83xx_beacon_blink(struct scsi_qla_host *vha)
 
 	if (IS_QLA2031(ha) && ha->beacon_blink_led) {
 		if (ha->flags.port0)
-			led_select_value = 0x00201320;
+			led_select_value = QLA83XX_LED_PORT0;
 		else
-			led_select_value = 0x00201328;
+			led_select_value = QLA83XX_LED_PORT1;
 
-		qla83xx_write_remote_reg(vha, led_select_value, 0x40002000);
-		qla83xx_write_remote_reg(vha, led_select_value + 4, 0x40002000);
+		qla83xx_wr_reg(vha, led_select_value, 0x40002000);
+		qla83xx_wr_reg(vha, led_select_value + 4, 0x40002000);
 		msleep(1000);
-		qla83xx_write_remote_reg(vha, led_select_value, 0x40004000);
-		qla83xx_write_remote_reg(vha, led_select_value + 4, 0x40004000);
+		qla83xx_wr_reg(vha, led_select_value, 0x40004000);
+		qla83xx_wr_reg(vha, led_select_value + 4, 0x40004000);
 	} else if ((IS_QLA8031(ha) || IS_QLA81XX(ha)) && ha->beacon_blink_led) {
 		int rval;