diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 3467ec94d8b134bc8640dfcb0f02c61c20bb0229..f5628523c694b6620f0748581a866c0e844e20d4 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -4,13 +4,13 @@
 
 obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
-obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
-obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
-obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
-obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1200)	+= db1200/
+obj-$(CONFIG_MIPS_PB1100)	+= pb1100.o
+obj-$(CONFIG_MIPS_PB1200)	+= pb1200.o
+obj-$(CONFIG_MIPS_PB1500)	+= pb1500.o
+obj-$(CONFIG_MIPS_PB1550)	+= pb1550.o
+obj-$(CONFIG_MIPS_DB1000)	+= db1x00.o
+obj-$(CONFIG_MIPS_DB1100)	+= db1x00.o
+obj-$(CONFIG_MIPS_DB1200)	+= db1200.o
 obj-$(CONFIG_MIPS_DB1300)	+= db1300.o
-obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
+obj-$(CONFIG_MIPS_DB1500)	+= db1x00.o
 obj-$(CONFIG_MIPS_DB1550)	+= db1550.o
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200.c
similarity index 85%
rename from arch/mips/alchemy/devboards/db1200/platform.c
rename to arch/mips/alchemy/devboards/db1200.c
index c61867c93c4ab49c44c6c9b7df8387cc2f2adac3..43f5f1be9d688ace69f4dcf7d60911cc4882d286 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -1,7 +1,7 @@
 /*
  * DBAu1200 board platform device registration
  *
- * Copyright (C) 2008-2009 Manuel Lauss
+ * Copyright (C) 2008-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
@@ -33,14 +34,64 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/smc91x.h>
-
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1550_spi.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-db1x00/db1200.h>
 
-#include "../platform.h"
+#include "platform.h"
+
+
+const char *get_system_type(void)
+{
+	return "DB1200";
+}
+
+void __init board_setup(void)
+{
+	unsigned long freq0, clksrc, div, pfc;
+	unsigned short whoami;
+
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n",
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+	 * CPU clock; all other clock generators off/unused.
+	 */
+	div = (get_au1x00_speed() + 25000000) / 50000000;
+	if (div & 1)
+		div++;
+	div = ((div >> 1) - 1) & 0xff;
+
+	freq0 = div << SYS_FC_FRDIV0_BIT;
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+	freq0 |= SYS_FC_FE0;	/* enable F0 */
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+
+	/* psc0_intclk comes 1:1 from F0 */
+	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+	wmb();
+}
+
+/******************************************************************************/
 
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
@@ -78,18 +129,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = {
 };
 
 static struct i2c_board_info db1200_i2c_devs[] __initdata = {
-	{
-		/* AT24C04-10 I2C eeprom */
-		I2C_BOARD_INFO("24c04", 0x52),
-	},
-	{
-		/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
-		I2C_BOARD_INFO("ne1619", 0x2d),
-	},
-	{
-		/* I2S audio codec WM8731 */
-		I2C_BOARD_INFO("wm8731", 0x1b),
-	},
+	{ I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
 };
 
 /**********************************************************************/
@@ -206,7 +248,7 @@ static struct platform_device db1200_eth_dev = {
 static struct resource db1200_ide_res[] = {
 	[0] = {
 		.start	= DB1200_IDE_PHYS_ADDR,
-		.end 	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -221,13 +263,13 @@ static struct resource db1200_ide_res[] = {
 	},
 };
 
-static u64 ide_dmamask = DMA_BIT_MASK(32);
+static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_ide_dev = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
-		.dma_mask 		= &ide_dmamask,
+		.dma_mask		= &au1200_ide_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
@@ -533,6 +575,21 @@ static int __init db1200_dev_init(void)
 	unsigned short sw;
 	int swapped;
 
+	/* GPIO7 is low-level triggered CPLD cascade */
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
+	 */
+	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
+
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 	spi_register_board_info(db1200_spi_devs,
@@ -595,7 +652,7 @@ static int __init db1200_dev_init(void)
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 	__raw_writel(PSC_SEL_CLK_SERCLK,
-		(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();
 
 	db1x_register_pcmcia_socket(
diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile
deleted file mode 100644
index 17840a5e27382ceba75b3c03b28b72a1fdf94581..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/db1200/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
deleted file mode 100644
index 4a8980027ecf83538229e71ea67fe3c27c2a4517..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Alchemy/AMD/RMI DB1200 board setup.
- *
- * Licensed under the terms outlined in the file COPYING in the root of
- * this source archive.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-db1x00/db1200.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1200";
-}
-
-void __init board_setup(void)
-{
-	unsigned long freq0, clksrc, div, pfc;
-	unsigned short whoami;
-
-	bcsr_init(DB1200_BCSR_PHYS_ADDR,
-		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
-
-	whoami = bcsr_read(BCSR_WHOAMI);
-	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n",
-		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
-
-	/* SMBus/SPI on PSC0, Audio on PSC1 */
-	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
-	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
-	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
-	wmb();
-
-	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
-	 * CPU clock; all other clock generators off/unused.
-	 */
-	div = (get_au1x00_speed() + 25000000) / 50000000;
-	if (div & 1)
-		div++;
-	div = ((div >> 1) - 1) & 0xff;
-
-	freq0 = div << SYS_FC_FRDIV0_BIT;
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-	freq0 |= SYS_FC_FE0;	/* enable F0 */
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-
-	/* psc0_intclk comes 1:1 from F0 */
-	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
-	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
-	wmb();
-}
-
-static int __init db1200_arch_init(void)
-{
-	/* GPIO7 is low-level triggered CPLD cascade */
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
-
-	/* insert/eject pairs: one of both is always screaming.  To avoid
-	 * issues they must not be automatically enabled when initially
-	 * requested.
-	 */
-	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
-	return 0;
-}
-arch_initcall(db1200_arch_init);
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00.c
similarity index 77%
rename from arch/mips/alchemy/devboards/db1x00/platform.c
rename to arch/mips/alchemy/devboards/db1x00.c
index 67b36e8a4c98a78a555215d2fe4cb4c318f78b45..589ae2435cbebcced7c7332b40b0c9b7b0054b6d 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00.c
@@ -1,7 +1,8 @@
 /*
- * DBAu1xxx board platform device registration
+ * DBAu1000/1500/1100 board support
  *
- * Copyright (C) 2009 Manuel Lauss
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,20 +19,61 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-
+#include <linux/pm.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 #include <asm/mach-db1x00/bcsr.h>
-#include "../platform.h"
+#include <asm/reboot.h>
+#include <prom.h>
+#include "platform.h"
 
 struct pci_dev;
 
+const char *get_system_type(void)
+{
+	return "Alchemy Db1x00";
+}
+
+void __init board_setup(void)
+{
+#ifdef CONFIG_MIPS_DB1000
+	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1100
+	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+	/* initialize board register space */
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
+#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
+	{
+		u32 pin_func;
+
+		/* Set IRFIRSEL instead of GPIO15 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+		au_writel(pin_func, SYS_PINFUNC);
+		/* Power off until the driver is in use */
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			 BCSR_RESETS_IRDA_MODE_OFF);
+	}
+#endif
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
+
+	/* Enable GPIO[31:0] inputs */
+	alchemy_gpio1_input_enable();
+}
+
 /* DB1xxx PCMCIA interrupt sources:
- * CD0/1 	GPIO0/3
+ * CD0/1	GPIO0/3
  * STSCHG0/1	GPIO1/4
  * CARD0/1	GPIO2/5
  */
@@ -174,6 +216,13 @@ static struct platform_device db1x00_audio_dev = {
 
 static int __init db1xxx_dev_init(void)
 {
+	irq_set_irq_type(DB1XXX_PCMCIA_CD0, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(DB1XXX_PCMCIA_CD1, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(DB1XXX_PCMCIA_CARD0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(DB1XXX_PCMCIA_CARD1, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(DB1XXX_PCMCIA_STSCHG0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(DB1XXX_PCMCIA_STSCHG1, IRQ_TYPE_LEVEL_LOW);
+
 	db1x_register_pcmcia_socket(
 		AU1000_PCMCIA_ATTR_PHYS_ADDR,
 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
@@ -201,7 +250,7 @@ static int __init db1xxx_dev_init(void)
 	platform_device_register(&alchemy_ac97c_dev);
 	platform_device_register(&db1x00_audio_dev);
 
-	db1x_register_norflash(0x02000000, 4 /* 32bit */, F_SWAPPED);
+	db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED);
 	return 0;
 }
 device_initcall(db1xxx_dev_init);
diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
deleted file mode 100644
index 613c0c0c8be9268ae540f915ac32724406788d2c..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/db1x00/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
-#
-
-obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
deleted file mode 100644
index 2dbebcba0206249be53e713ac3c1341420536503..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_eth.h>
-#include <asm/mach-db1x00/db1x00.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/reboot.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1x00";
-}
-
-
-void __init board_setup(void)
-{
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
-#endif
-	/* initialize board register space */
-	bcsr_init(DB1000_BCSR_PHYS_ADDR,
-		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
-
-#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
-	{
-		u32 pin_func;
-
-		/* Set IRFIRSEL instead of GPIO15 */
-		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-		au_writel(pin_func, SYS_PINFUNC);
-		/* Power off until the driver is in use */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-			 BCSR_RESETS_IRDA_MODE_OFF);
-	}
-#endif
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	/* Enable GPIO[31:0] inputs */
-	alchemy_gpio1_input_enable();
-}
-
-static int __init db1x00_init_irq(void)
-{
-#if defined(CONFIG_MIPS_DB1500)
-	irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1100)
-	irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1000)
-	irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#endif
-	return 0;
-}
-arch_initcall(db1x00_init_irq);
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100.c
similarity index 55%
rename from arch/mips/alchemy/devboards/pb1100/board_setup.c
rename to arch/mips/alchemy/devboards/pb1100.c
index d108fd573aaf0eb75d7a2d25abb9a62cbb38eba2..cff50d05ddd4136e954917509ffdbedfb6e444c6 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100.c
@@ -1,42 +1,37 @@
 /*
- * Copyright 2002, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1100 board platform device registration
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
-
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1100";
+	return "PB1100";
 }
 
 void __init board_setup(void)
@@ -115,13 +110,58 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1100_init_irq(void)
+/******************************************************************************/
+
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
+static int __init pb1100_dev_init(void)
 {
+	int swapped;
+
 	irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
 	irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
 	irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
 	irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
 
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
+		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&au1100_lcd_device);
+
 	return 0;
 }
-arch_initcall(pb1100_init_irq);
+device_initcall(pb1100_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
deleted file mode 100644
index 7e3756c83fe5293e78c3e29aec9e3d6fcab0ac3e..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1100/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1100 board.
-#
-
-obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
deleted file mode 100644
index 9c57c01a68c4ac91d7a68727b4937a7e1e9cf088..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1100/platform.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Pb1100 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start	= AU1100_LCD_PHYS_ADDR,
-		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1100_LCD_INT,
-		.end	= AU1100_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
-	.name		= "au1100-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1100_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
-	.resource	= au1100_lcd_resources,
-};
-
-static int __init pb1100_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
-		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&au1100_lcd_device);
-
-	return 0;
-}
-device_initcall(pb1100_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200.c
similarity index 70%
rename from arch/mips/alchemy/devboards/pb1200/platform.c
rename to arch/mips/alchemy/devboards/pb1200.c
index 54f7f7b0676e1d105a4d9f03527e4e10a520f183..a1b64977b471cb96ac659ea40a6e853fa2c6f486 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200.c
@@ -20,17 +20,97 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-pb1x00/pb1200.h>
+#include <prom.h>
+#include "platform.h"
+
+
+const char *get_system_type(void)
+{
+	return "PB1200";
+}
+
+void __init board_setup(void)
+{
+	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+
+#if 0
+	{
+		u32 pin_func;
+
+		/*
+		 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+		 * but it is board specific code, so put it here.
+		 */
+		pin_func = au_readl(SYS_PINFUNC);
+		au_sync();
+		pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+		au_writel(pin_func, SYS_PINFUNC);
+
+		au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+		au_sync();
+	}
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+	{
+		u32 freq0, clksrc;
+		u32 pin_func;
+
+		/* Select SMBus in CPLD */
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+
+		pin_func = au_readl(SYS_PINFUNC);
+		au_sync();
+		pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+		/* Set GPIOs correctly */
+		pin_func |= 2 << 17;
+		au_writel(pin_func, SYS_PINFUNC);
+		au_sync();
+
+		/* The I2C driver depends on 50 MHz clock */
+		freq0 = au_readl(SYS_FREQCTRL0);
+		au_sync();
+		freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+		freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+		/* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+		au_writel(freq0, SYS_FREQCTRL0);
+		au_sync();
+		freq0 |= SYS_FC_FE1;
+		au_writel(freq0, SYS_FREQCTRL0);
+		au_sync();
+
+		clksrc = au_readl(SYS_CLKSRC);
+		au_sync();
+		clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+		/* Bit 22 is EXTCLK0 for PSC0 */
+		clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+		au_writel(clksrc, SYS_CLKSRC);
+		au_sync();
+	}
+#endif
+
+	/*
+	 * The Pb1200 development board uses external MUX for PSC0 to
+	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
+	 */
+#ifdef CONFIG_I2C_AU1550
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+#endif
+	au_sync();
+}
 
-#include "../platform.h"
+/******************************************************************************/
 
 static int mmc_activity;
 
@@ -183,7 +263,7 @@ static struct platform_device pb1200_mmc1_dev = {
 static struct resource ide_resources[] = {
 	[0] = {
 		.start	= IDE_PHYS_ADDR,
-		.end 	= IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
+		.end	= IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
 		.flags	= IORESOURCE_MEM
 	},
 	[1] = {
@@ -198,13 +278,13 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dmamask = DMA_BIT_MASK(32);
+static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device ide_device = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
-		.dma_mask 		= &ide_dmamask,
+		.dma_mask		= &au1200_ide_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(ide_resources),
@@ -310,6 +390,29 @@ static int __init board_register_devices(void)
 {
 	int swapped;
 
+	/* We have a problem with CPLD rev 3. */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+		printk(KERN_ERR "updated to latest revision. This software will\n");
+		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		panic("Game over.  Your score is 0.");
+	}
+
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
+
 	db1x_register_pcmcia_socket(
 		AU1000_PCMCIA_ATTR_PHYS_ADDR,
 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
@@ -337,3 +440,25 @@ static int __init board_register_devices(void)
 				    ARRAY_SIZE(board_platform_devices));
 }
 device_initcall(board_register_devices);
+
+
+int board_au1200fb_panel(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+int board_au1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+int board_au1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}
diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
deleted file mode 100644
index 18c1bd53e4c0e5464b972fc994c0838c5fd75cb0..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1200/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
-#
-
-obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
deleted file mode 100644
index 6d06b07c238111b774c2a7e2a15a68dfcbbc4b6f..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1200/Db1200 board setup.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1200";
-}
-
-void __init board_setup(void)
-{
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-	bcsr_init(PB1200_BCSR_PHYS_ADDR,
-		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
-
-#if 0
-	{
-		u32 pin_func;
-
-		/*
-		 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-		 * but it is board specific code, so put it here.
-		 */
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-		au_writel(pin_func, SYS_PINFUNC);
-
-		au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-		au_sync();
-	}
-#endif
-
-#if defined(CONFIG_I2C_AU1550)
-	{
-		u32 freq0, clksrc;
-		u32 pin_func;
-
-		/* Select SMBus in CPLD */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-		/* Set GPIOs correctly */
-		pin_func |= 2 << 17;
-		au_writel(pin_func, SYS_PINFUNC);
-		au_sync();
-
-		/* The I2C driver depends on 50 MHz clock */
-		freq0 = au_readl(SYS_FREQCTRL0);
-		au_sync();
-		freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-		freq0 |= 3 << SYS_FC_FRDIV1_BIT;
-		/* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-		freq0 |= SYS_FC_FE1;
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-
-		clksrc = au_readl(SYS_CLKSRC);
-		au_sync();
-		clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
-		/* Bit 22 is EXTCLK0 for PSC0 */
-		clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
-		au_writel(clksrc, SYS_CLKSRC);
-		au_sync();
-	}
-#endif
-
-	/*
-	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
-	 */
-#ifdef CONFIG_I2C_AU1550
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-#endif
-	au_sync();
-}
-
-static int __init pb1200_init_irq(void)
-{
-	/* We have a problem with CPLD rev 3. */
-	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
-		printk(KERN_ERR "updated to latest revision. This software will\n");
-		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		panic("Game over.  Your score is 0.");
-	}
-
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
-
-	return 0;
-}
-arch_initcall(pb1200_init_irq);
-
-
-int board_au1200fb_panel(void)
-{
-	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
-}
-
-int board_au1200fb_panel_init(void)
-{
-	/* Apply power */
-	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-				BCSR_BOARD_LCDBL);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
-	return 0;
-}
-
-int board_au1200fb_panel_shutdown(void)
-{
-	/* Remove power */
-	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			     BCSR_BOARD_LCDBL, 0);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
-	return 0;
-}
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500.c
similarity index 51%
rename from arch/mips/alchemy/devboards/pb1500/board_setup.c
rename to arch/mips/alchemy/devboards/pb1500.c
index 37c1883b5ea99af433727ddbe170df23ec97ff62..e7b807b3ec51b9ecbdb850349e0646aa14193744 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500.c
@@ -1,41 +1,37 @@
 /*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1500 board support.
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1500";
+	return "PB1500";
 }
 
 void __init board_setup(void)
@@ -123,17 +119,80 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1500_init_irq(void)
+/******************************************************************************/
+
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
-	irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
-	irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
-	irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+	.board_map_irq	= pb1500_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+	.dev.platform_data = &pb1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init pb1500_dev_init(void)
+{
+	int swapped;
+
+	irq_set_irq_type(AU1500_GPIO9_INT,   IRQF_TRIGGER_LOW);   /* CD0# */
+	irq_set_irq_type(AU1500_GPIO10_INT,  IRQF_TRIGGER_LOW);  /* CARD0 */
+	irq_set_irq_type(AU1500_GPIO11_INT,  IRQF_TRIGGER_LOW);  /* STSCHG0# */
 	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
 	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 
+	/* PCMCIA. single socket, identical to Pb1100 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
+		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1500_pci_host);
+
 	return 0;
 }
-arch_initcall(pb1500_init_irq);
+arch_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
deleted file mode 100644
index e83b151b5b6300642e49db70945baf4e1e40da50..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1500/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1500 board.
-#
-
-obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
deleted file mode 100644
index 1e52a01bac00334f31b0c82524552122248eac1a..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1500/platform.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Pb1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 12) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct alchemy_pci_platdata pb1500_pci_pd = {
-	.board_map_irq	= pb1500_map_pci_irq,
-	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
-			  PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
-			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
-			  0,
-#endif
-};
-
-static struct platform_device pb1500_pci_host = {
-	.dev.platform_data = &pb1500_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-static int __init pb1500_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1100 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
-		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&pb1500_pci_host);
-
-	return 0;
-}
-arch_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550.c
similarity index 78%
rename from arch/mips/alchemy/devboards/pb1550/platform.c
rename to arch/mips/alchemy/devboards/pb1550.c
index a4604b8a349ef222d7a7d2a5c83ab0536f524ed0..e4a00a56a20f8df1b82309e10ab82810f50c4b0c 100644
--- a/arch/mips/alchemy/devboards/pb1550/platform.c
+++ b/arch/mips/alchemy/devboards/pb1550.c
@@ -1,7 +1,7 @@
 /*
- * Pb1550 board platform device registration
+ * Pb1550 board support.
  *
- * Copyright (C) 2009 Manuel Lauss
+ * Copyright (C) 2009-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,13 +20,43 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/gpio.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include "platform.h"
 
-#include "../platform.h"
+const char *get_system_type(void)
+{
+	return "PB1550";
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+	alchemy_gpio2_enable();
+
+	/*
+	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
+
+	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
+}
+
+/******************************************************************************/
 
 static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
@@ -105,6 +135,14 @@ static int __init pb1550_dev_init(void)
 {
 	int swapped;
 
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+	/* enable both PCMCIA card irqs in the shared line */
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
+
 	/* Pb1550, like all others, also has statuschange irqs; however they're
 	* wired up on one of the Au1550's shared GPIO201_205 line, which also
 	* services the PCMCIA card interrupts.  So we ignore statuschange and
diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
deleted file mode 100644
index 9661b6ec5dd374283975395cb55e3e76a6866815..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1550/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1550 board.
-#
-
-obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
deleted file mode 100644
index 0f62d1e3df244a51afcd0754e4604144f64b1d11..0000000000000000000000000000000000000000
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1550 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1550.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-au1x00/gpio.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1550";
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-	bcsr_init(PB1550_BCSR_PHYS_ADDR,
-		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
-
-	alchemy_gpio2_enable();
-
-	/*
-	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
-	 * but it is board specific code, so put it here.
-	 */
-	pin_func = au_readl(SYS_PINFUNC);
-	au_sync();
-	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
-}
-
-static int __init pb1550_init_irq(void)
-{
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
-
-	/* enable both PCMCIA card irqs in the shared line */
-	alchemy_gpio2_enable_int(201);
-	alchemy_gpio2_enable_int(202);
-
-	return 0;
-}
-arch_initcall(pb1550_init_irq);