diff --git a/drivers/net/wireless/cw1200/Kconfig b/drivers/net/wireless/cw1200/Kconfig index 13e36119ae9f03b3f80fe407edc7fa85bc6e2ae6..7a585d4e9c8e3375390dde080cf2f4983e6e23b7 100644 --- a/drivers/net/wireless/cw1200/Kconfig +++ b/drivers/net/wireless/cw1200/Kconfig @@ -13,20 +13,19 @@ config CW1200_WLAN_SDIO depends on CW1200 && MMC help Enable support for the CW1200 connected via an SDIO bus. + By default this driver only supports the Sagrad SG901-1091/1098 EVK + and similar designs that utilize a hardware reset circuit. To + support different CW1200 SDIO designs you will need to override + the default platform data by calling cw1200_sdio_set_platform_data() + in your board setup file. config CW1200_WLAN_SPI tristate "Support SPI platforms" depends on CW1200 && SPI help - Enables support for the CW1200 connected via a SPI bus. - -config CW1200_WLAN_SAGRAD - tristate "Support Sagrad SG901-1091/1098 modules" - depends on CW1200_WLAN_SDIO - help - This provides the platform data glue to support the - Sagrad SG901-1091/1098 modules in their standard SDIO EVK. - It also includes example SPI platform data. + Enables support for the CW1200 connected via a SPI bus. You will + need to add appropriate platform data glue in your board setup + file. menu "Driver debug features" depends on CW1200 && DEBUG_FS diff --git a/drivers/net/wireless/cw1200/Makefile b/drivers/net/wireless/cw1200/Makefile index 1aa3682066e0411a0b7778f8cf4216324f065b42..bc6cbf91f26e11deedc81c4a64565483c56620c1 100644 --- a/drivers/net/wireless/cw1200/Makefile +++ b/drivers/net/wireless/cw1200/Makefile @@ -16,9 +16,7 @@ cw1200_core-$(CONFIG_PM) += pm.o cw1200_wlan_sdio-y := cw1200_sdio.o cw1200_wlan_spi-y := cw1200_spi.o -cw1200_wlan_sagrad-y := cw1200_sagrad.o obj-$(CONFIG_CW1200) += cw1200_core.o obj-$(CONFIG_CW1200_WLAN_SDIO) += cw1200_wlan_sdio.o obj-$(CONFIG_CW1200_WLAN_SPI) += cw1200_wlan_spi.o -obj-$(CONFIG_CW1200_WLAN_SAGRAD) += cw1200_wlan_sagrad.o diff --git a/drivers/net/wireless/cw1200/cw1200_sagrad.c b/drivers/net/wireless/cw1200/cw1200_sagrad.c deleted file mode 100644 index 3f884ac96ccc994711c56f7741642634372248d6..0000000000000000000000000000000000000000 --- a/drivers/net/wireless/cw1200/cw1200_sagrad.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Platform glue data for ST-Ericsson CW1200 driver - * - * Copyright (c) 2013, Sagrad, Inc - * Author: Solomon Peachy - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -MODULE_AUTHOR("Solomon Peachy "); -MODULE_DESCRIPTION("ST-Ericsson CW1200 Platform glue driver"); -MODULE_LICENSE("GPL"); - -/* Define just one of these. Feel free to customize as needed */ -#define SAGRAD_1091_1098_EVK_SDIO -/* #define SAGRAD_1091_1098_EVK_SPI */ - -#ifdef SAGRAD_1091_1098_EVK_SDIO -static int cw1200_power_ctrl(const struct cw1200_platform_data_sdio *pdata, - bool enable) -{ - /* Control 3v3 and 1v8 to hardware as appropriate */ - /* Note this is not needed if it's controlled elsewhere or always on */ - - /* May require delay for power to stabilize */ - return 0; -} - -static int cw1200_clk_ctrl(const struct cw1200_platform_data_sdio *pdata, - bool enable) -{ - /* Turn CLK_32K off and on as appropriate. */ - /* Note this is not needed if it's always on */ - - /* May require delay for clock to stabilize */ - return 0; -} - -static struct cw1200_platform_data_sdio cw1200_platform_data = { - .ref_clk = 38400, - .have_5ghz = false, -#if 0 - .reset = GPIO_RF_RESET, /* Replace as appropriate */ - .powerup = GPIO_RF_POWERUP, /* Replace as appropriate */ - .irq = GPIO_TO_IRQ(GPIO_RF_IRQ), /* Replace as appropriate */ -#endif - .power_ctrl = cw1200_power_ctrl, - .clk_ctrl = cw1200_clk_ctrl, -/* .macaddr = ??? */ - .sdd_file = "sdd_sagrad_1091_1098.bin", -}; -#endif - -#ifdef SAGRAD_1091_1098_EVK_SPI -static int cw1200_power_ctrl(const struct cw1200_platform_data_spi *pdata, - bool enable) -{ - /* Control 3v3 and 1v8 to hardware as appropriate */ - /* Note this is not needed if it's controlled elsewhere or always on */ - - /* May require delay for power to stabilize */ - return 0; -} -static int cw1200_clk_ctrl(const struct cw1200_platform_data_spi *pdata, - bool enable) -{ - /* Turn CLK_32K off and on as appropriate. */ - /* Note this is not needed if it's always on */ - - /* May require delay for clock to stabilize */ - return 0; -} - -static struct cw1200_platform_data_spi cw1200_platform_data = { - .ref_clk = 38400, - .spi_bits_per_word = 16, - .reset = GPIO_RF_RESET, /* Replace as appropriate */ - .powerup = GPIO_RF_POWERUP, /* Replace as appropriate */ - .power_ctrl = cw1200_power_ctrl, - .clk_ctrl = cw1200_clk_ctrl, -/* .macaddr = ??? */ - .sdd_file = "sdd_sagrad_1091_1098.bin", -}; -static struct spi_board_info myboard_spi_devices[] __initdata = { - { - .modalias = "cw1200_wlan_spi", - .max_speed_hz = 10000000, /* 52MHz Max */ - .bus_num = 0, - .irq = WIFI_IRQ, - .platform_data = &cw1200_platform_data, - .chip_select = 0, - }, -}; -#endif - - -const void *cw1200_get_platform_data(void) -{ - return &cw1200_platform_data; -} -EXPORT_SYMBOL_GPL(cw1200_get_platform_data); diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c index 574cf727567c1b1d0da7ccc2ea949c868007ffd1..4b3148e47ee7d8cfc379335a20c36f0202b5af8b 100644 --- a/drivers/net/wireless/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/cw1200/cw1200_sdio.c @@ -29,6 +29,21 @@ MODULE_LICENSE("GPL"); #define SDIO_BLOCK_SIZE (512) +/* Default platform data for Sagrad modules */ +static struct cw1200_platform_data_sdio sagrad_109x_evk_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_sagrad_1091_1098.bin", +}; + +/* Allow platform data to be overridden */ +static struct cw1200_platform_data_sdio *global_plat_data = &sagrad_109x_evk_platform_data; + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata) +{ + global_plat_data = pdata; +} + struct hwbus_priv { struct sdio_func *func; struct cw1200_common *core; @@ -261,7 +276,7 @@ static struct hwbus_ops cw1200_sdio_hwbus_ops = { /* Probe Function to be called by SDIO stack when device is discovered */ static int cw1200_sdio_probe(struct sdio_func *func, - const struct sdio_device_id *id) + const struct sdio_device_id *id) { struct hwbus_priv *self; int status; @@ -280,7 +295,7 @@ static int cw1200_sdio_probe(struct sdio_func *func, func->card->quirks |= MMC_QUIRK_LENIENT_FN0; - self->pdata = cw1200_get_platform_data(); + self->pdata = global_plat_data; /* FIXME */ self->func = func; sdio_set_drvdata(func, self); sdio_claim_host(func); @@ -374,7 +389,8 @@ static int __init cw1200_sdio_init(void) const struct cw1200_platform_data_sdio *pdata; int ret; - pdata = cw1200_get_platform_data(); + /* FIXME -- this won't support multiple devices */ + pdata = global_plat_data; if (cw1200_sdio_on(pdata)) { ret = -1; @@ -396,7 +412,9 @@ static int __init cw1200_sdio_init(void) static void __exit cw1200_sdio_exit(void) { const struct cw1200_platform_data_sdio *pdata; - pdata = cw1200_get_platform_data(); + + /* FIXME -- this won't support multiple devices */ + pdata = global_plat_data; sdio_unregister_driver(&sdio_driver); cw1200_sdio_off(pdata); } diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h index 4454c16ea3e5eef85348fd96efd359db3209af32..c6fbc3ce4ab0012e6c8a83d9422fe519a3b79bdc 100644 --- a/include/linux/platform_data/cw1200_platform.h +++ b/include/linux/platform_data/cw1200_platform.h @@ -41,6 +41,41 @@ struct cw1200_platform_data_sdio { const char *sdd_file; /* if NULL, will use default for detected hw type */ }; -const void *cw1200_get_platform_data(void); + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); #endif /* CW1200_PLAT_H_INCLUDED */