diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c
index e34da13885e8c422a7fdecc153d6407c0b52999f..27fa62ce613618debb31fadb6bb50a51d9e65893 100644
--- a/drivers/phy/phy-miphy28lp.c
+++ b/drivers/phy/phy-miphy28lp.c
@@ -1050,7 +1050,8 @@ static int miphy28lp_init(struct phy *phy)
 		ret = miphy28lp_init_usb3(miphy_phy);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		break;
 	}
 
 	mutex_unlock(&miphy_dev->miphy_mutex);
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index c96e8183a8ffe061e017976daa40632ac5a22c56..efe724f97e02fbf9eba84c215628993fa3ea1274 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -29,10 +29,9 @@
 /**
  * omap_control_pcie_pcs - set the PCS delay count
  * @dev: the control module device
- * @id: index of the pcie PHY (should be 1 or 2)
  * @delay: 8 bit delay value
  */
-void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
+void omap_control_pcie_pcs(struct device *dev, u8 delay)
 {
 	u32 val;
 	struct omap_control_phy	*control_phy;
@@ -55,8 +54,8 @@ void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
 
 	val = readl(control_phy->pcie_pcs);
 	val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
-		(id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT));
-	val |= delay << (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+		OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+	val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
 	writel(val, control_phy->pcie_pcs);
 }
 EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index fb02a67c91811e5291757c8fbb330439c3d95e89..a2b08f3ccb031cbf3a484cb0afab5665c0fb3ad7 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -244,7 +244,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	else
 		data->num_phys = 3;
 
-	if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy"))
+	if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy") ||
+	    of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
 		data->disc_thresh = 3;
 	else
 		data->disc_thresh = 2;
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 1387b4d4afe376556661f49938bf71bb85572d94..465de2c800f228d7fa4961083e243349f5fbcd33 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -82,7 +82,6 @@ struct ti_pipe3 {
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
-	u8			id;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -217,8 +216,13 @@ static int ti_pipe3_init(struct phy *x)
 	u32 val;
 	int ret = 0;
 
+	/*
+	 * Set pcie_pcs register to 0x96 for proper functioning of phy
+	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
+	 * 18-1804.
+	 */
 	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
-		omap_control_pcie_pcs(phy->control_dev, phy->id, 0xF1);
+		omap_control_pcie_pcs(phy->control_dev, 0x96);
 		return 0;
 	}
 
@@ -347,8 +351,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	}
 
 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-		if (of_property_read_u8(node, "id", &phy->id) < 0)
-			phy->id = 1;
 
 		clk = devm_clk_get(phy->dev, "dpll_ref");
 		if (IS_ERR(clk)) {
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 5b9825a4538a67740a3ccf0d1ceea28d08f5d5c5..a57dc8866fc5ff938641686f7945916074723fe8 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -669,7 +669,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (!ci)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, ci);
 	ci->dev = dev;
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
@@ -783,6 +782,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		}
 	}
 
+	platform_set_drvdata(pdev, ci);
 	ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
 			ci->platdata->name, ci);
 	if (ret)
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index c1694cff1eafd287c600435a45c861a4406e6514..48731d0bab357a75232fdbd7b4063fe29af3ad4e 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -91,6 +91,7 @@ static int host_start(struct ci_hdrc *ci)
 	if (!hcd)
 		return -ENOMEM;
 
+	dev_set_drvdata(ci->dev, ci);
 	hcd->rsrc_start = ci->hw_bank.phys;
 	hcd->rsrc_len = ci->hw_bank.size;
 	hcd->regs = ci->hw_bank.abs;
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 200168ec2d7567e63ce9b8a8fa4afb0009b85831..79242008085bbed84a9e7caf142077215d89aab7 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2567,7 +2567,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
  * s3c_hsotg_ep_disable - disable given endpoint
  * @ep: The endpoint to disable.
  */
-static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force)
 {
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
@@ -2588,7 +2588,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 	/* terminate all requests with shutdown */
-	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
+	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, force);
 
 	hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
 	hs_ep->fifo_index = 0;
@@ -2609,6 +2609,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	return 0;
 }
 
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+	return s3c_hsotg_ep_disable_force(ep, false);
+}
 /**
  * on_list - check request is on the given endpoint
  * @ep: The endpoint to check.
@@ -2924,7 +2928,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget)
 
 	/* all endpoints should be shutdown */
 	for (ep = 1; ep < hsotg->num_of_eps; ep++)
-		s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+		s3c_hsotg_ep_disable_force(&hsotg->eps[ep].ep, true);
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 7c4faf738747bdab2bf5a73e39297f8ae437aeb7..b642a2f998f9eaf8079b36e1b22612042e353288 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -33,6 +33,8 @@
 #define PCI_DEVICE_ID_INTEL_BYT		0x0f37
 #define PCI_DEVICE_ID_INTEL_MRFLD	0x119e
 #define PCI_DEVICE_ID_INTEL_BSW		0x22B7
+#define PCI_DEVICE_ID_INTEL_SPTLP	0x9d30
+#define PCI_DEVICE_ID_INTEL_SPTH	0xa130
 
 struct dwc3_pci {
 	struct device		*dev;
@@ -219,6 +221,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
 	{  }	/* Terminating Entry */
 };
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f03b136ecfce33b3b6936314d1fdebabb4ce936d..8f65ab3a3b928f3872dcc42b1ddfef38d4ba5d26 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -882,8 +882,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 
 				if (i == (request->num_mapped_sgs - 1) ||
 						sg_is_last(s)) {
-					if (list_is_last(&req->list,
-							&dep->request_list))
+					if (list_empty(&dep->request_list))
 						last_one = true;
 					chain = false;
 				}
@@ -901,6 +900,9 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 				if (last_one)
 					break;
 			}
+
+			if (last_one)
+				break;
 		} else {
 			dma = req->request.dma;
 			length = req->request.length;
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 6e04e302dc3a85b0dba95cc90c12e97323fa635c..a1bc3e3a0b09f740342e949024db337e030e9ed9 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -399,8 +399,9 @@ static int hidg_setup(struct usb_function *f,
 	value	= __le16_to_cpu(ctrl->wValue);
 	length	= __le16_to_cpu(ctrl->wLength);
 
-	VDBG(cdev, "hid_setup crtl_request : bRequestType:0x%x bRequest:0x%x "
-		"Value:0x%x\n", ctrl->bRequestType, ctrl->bRequest, value);
+	VDBG(cdev,
+	     "%s crtl_request : bRequestType:0x%x bRequest:0x%x Value:0x%x\n",
+	     __func__, ctrl->bRequestType, ctrl->bRequest, value);
 
 	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
 	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index a90440300735fecaa9502c0234e7abbb81db860b..259b656c0b3ec7bde9e119488f46ded351bb7300 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -520,7 +520,7 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
 		req = midi_alloc_ep_req(ep, midi->buflen);
 
 	if (!req) {
-		ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n");
+		ERROR(midi, "%s: alloc_ep_request failed\n", __func__);
 		return;
 	}
 	req->length = 0;
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index f7b20329320583d05c096882d8e04cec7d905097..e9715845f82e1dc825690c05f8cc08c2d8e41df7 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -897,7 +897,6 @@ static void f_audio_free_inst(struct usb_function_instance *f)
 	struct f_uac1_opts *opts;
 
 	opts = container_of(f, struct f_uac1_opts, func_inst);
-	gaudio_cleanup(opts->card);
 	if (opts->fn_play_alloc)
 		kfree(opts->fn_play);
 	if (opts->fn_cap_alloc)
@@ -935,6 +934,7 @@ static void f_audio_free(struct usb_function *f)
 	struct f_audio *audio = func_to_audio(f);
 	struct f_uac1_opts *opts;
 
+	gaudio_cleanup(&audio->card);
 	opts = container_of(f->fi, struct f_uac1_opts, func_inst);
 	kfree(audio);
 	mutex_lock(&opts->lock);
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index c744e4975d744c4fb710a429ec055616fffd4833..db49ec4c748e9469bd694645c8cfc22df7c829fa 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -441,6 +441,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	kbuf = memdup_user(buf, len);
 	if (IS_ERR(kbuf)) {
 		value = PTR_ERR(kbuf);
+		kbuf = NULL;
 		goto free1;
 	}
 
@@ -449,6 +450,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		data->name, len, (int) value);
 free1:
 	mutex_unlock(&data->lock);
+	kfree (kbuf);
 	return value;
 }
 
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index ce882371786b184d7b02f4a451d6c8c1b7a80efa..9f93bed42052cb5c910d5f34218287e58a558c6b 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -716,10 +716,10 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
 	req->using_dma = 1;
 	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
 			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
-			| USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
+			| USBA_DMA_END_BUF_EN;
 
-	if (ep->is_in)
-		req->ctrl |= USBA_DMA_END_BUF_EN;
+	if (!ep->is_in)
+		req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
 
 	/*
 	 * Add this request to the queue and submit for DMA if
@@ -828,7 +828,7 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
 	struct usba_ep *ep = to_usba_ep(_ep);
 	struct usba_udc *udc = ep->udc;
-	struct usba_request *req = to_usba_req(_req);
+	struct usba_request *req;
 	unsigned long flags;
 	u32 status;
 
@@ -837,6 +837,16 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 	spin_lock_irqsave(&udc->lock, flags);
 
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
 	if (req->using_dma) {
 		/*
 		 * If this request is currently being transferred,
@@ -1563,7 +1573,6 @@ static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
 	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
 		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
 		receive_data(ep);
-		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
 	}
 }
 
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index ff67ceac77c410a8f6a9ab27fc63f63afd9dc01b..d4fe8d769bd673c384707fae714944885061911d 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -718,10 +718,11 @@ static int ep_queue(struct bdc_ep *ep, struct bdc_req *req)
 	struct bdc *bdc;
 	int ret = 0;
 
-	bdc = ep->bdc;
 	if (!req || !ep || !ep->usb_ep.desc)
 		return -EINVAL;
 
+	bdc = ep->bdc;
+
 	req->usb_req.actual = 0;
 	req->usb_req.status = -EINPROGRESS;
 	req->epnum = ep->ep_num;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index e113fd73aeae7148b0cbcd0d424aebb16d84a694..f9a332775c4781e57faf7bd584d5d58cbf5397e3 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1581,6 +1581,10 @@ iso_stream_schedule (
 	else
 		next = (now + 2 + 7) & ~0x07;	/* full frame cache */
 
+	/* If needed, initialize last_iso_frame so that this URB will be seen */
+	if (ehci->isoc_count == 0)
+		ehci->last_iso_frame = now >> 3;
+
 	/*
 	 * Use ehci->last_iso_frame as the base.  There can't be any
 	 * TDs scheduled for earlier than that.
@@ -1600,11 +1604,11 @@ iso_stream_schedule (
 	 */
 	now2 = (now - base) & (mod - 1);
 
-	/* Is the schedule already full? */
+	/* Is the schedule about to wrap around? */
 	if (unlikely(!empty && start < period)) {
-		ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
+		ehci_dbg(ehci, "request %p would overflow (%u-%u < %u mod %u)\n",
 				urb, stream->next_uframe, base, period, mod);
-		status = -ENOSPC;
+		status = -EFBIG;
 		goto fail;
 	}
 
@@ -1671,10 +1675,6 @@ iso_stream_schedule (
 	urb->start_frame = start & (mod - 1);
 	if (!stream->highspeed)
 		urb->start_frame >>= 3;
-
-	/* Make sure scan_isoc() sees these */
-	if (ehci->isoc_count == 0)
-		ehci->last_iso_frame = now >> 3;
 	return status;
 
  fail:
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 19a9af1b4d749cd577e1215a200679f9a1c8b37d..ff9af29b4e9f6b0ea4bfa1decd8050fcbede061d 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -451,7 +451,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 
 	u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
 	if (IS_ERR(u_phy)) {
-		err = PTR_ERR(u_phy);
+		err = -EPROBE_DEFER;
 		goto cleanup_clk_en;
 	}
 	hcd->usb_phy = u_phy;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index dd483c13565bb7bbedc561d6e39fccee1477c279..ce636466edb7a390efb346d3b0f511b9d4eb5404 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -567,7 +567,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
 	u32 control;
-	u32 fminterval;
+	u32 fminterval = 0;
+	bool no_fminterval = false;
 	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
@@ -577,6 +578,13 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	if (base == NULL)
 		return;
 
+	/*
+	 * ULi M5237 OHCI controller locks the whole system when accessing
+	 * the OHCI_FMINTERVAL offset.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
+		no_fminterval = true;
+
 	control = readl(base + OHCI_CONTROL);
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
@@ -615,7 +623,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	}
 
 	/* software reset of the controller, preserving HcFmInterval */
-	fminterval = readl(base + OHCI_FMINTERVAL);
+	if (!no_fminterval)
+		fminterval = readl(base + OHCI_FMINTERVAL);
+
 	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
 	/* reset requires max 10 us delay */
@@ -624,7 +634,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 			break;
 		udelay(1);
 	}
-	writel(fminterval, base + OHCI_FMINTERVAL);
+
+	if (!no_fminterval)
+		writel(fminterval, base + OHCI_FMINTERVAL);
 
 	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 142b601f95636fdff622bca8c4fb1a9aef87093b..7f76c8a12f89db425e19c4f3a2a5200de542dbd7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -82,6 +82,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"must be suspended extra slowly",
 				pdev->revision);
 		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
+			xhci->quirks |= XHCI_BROKEN_STREAMS;
 		/* Fresco Logic confirms: all revisions of this chip do not
 		 * support MSI, even though some of them claim to in their PCI
 		 * capabilities.
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 01fcbb5eb06e7ec3d03bcd81d90941f889c5654a..c50d8d202618521793b37a8bd57d7b343cd757fd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3803,6 +3803,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		return -EINVAL;
 	}
 
+	if (setup == SETUP_CONTEXT_ONLY) {
+		slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+		if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+		    SLOT_STATE_DEFAULT) {
+			xhci_dbg(xhci, "Slot already in default state\n");
+			return 0;
+		}
+	}
+
 	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
 	if (!command)
 		return -ENOMEM;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 9d68372dd9aaa01d72b3a192959b3bccc2b2de93..b005010240e5b30df0823d220664f5829855ac81 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -72,6 +72,8 @@ config USB_MUSB_DA8XX
 
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
@@ -85,6 +87,7 @@ config USB_MUSB_AM35X
 config USB_MUSB_DSPS
 	tristate "TI DSPS platforms"
 	select USB_MUSB_AM335X_CHILD
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on OF_IRQ
 
 config USB_MUSB_BLACKFIN
@@ -93,6 +96,7 @@ config USB_MUSB_BLACKFIN
 
 config USB_MUSB_UX500
 	tristate "Ux500 platforms"
+	depends on ARCH_U8500 || COMPILE_TEST
 
 config USB_MUSB_JZ4740
 	tristate "JZ4740"
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index a441a2de8619e51d5f639e47332f3ec120d2a4f2..1782501456139aeb8f970fa51311a215a909d555 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -63,7 +63,7 @@ static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
 	bfin_write16(addr + offset, data);
 }
 
-static void binf_writel(void __iomem *addr, unsigned offset, u32 data)
+static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
 {
 	bfin_write16(addr + offset, (u16)data);
 }
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index f64fd964dc6d544b0fecee86a1fd9bd85993862a..c39a16ad78329194e78135464283dea4e760a4cc 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -628,9 +628,9 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		ret = of_property_read_string_index(np, "dma-names", i, &str);
 		if (ret)
 			goto err;
-		if (!strncmp(str, "tx", 2))
+		if (strstarts(str, "tx"))
 			is_tx = 1;
-		else if (!strncmp(str, "rx", 2))
+		else if (strstarts(str, "rx"))
 			is_tx = 0;
 		else {
 			dev_err(dev, "Wrong dmatype %s\n", str);
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index ad3701a9738964d5f7846e76ec69a31660badda1..48131aa8472cfef70b19d6a2a72db0a8d6b2db85 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -59,20 +59,12 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "RxMaxPp",	MUSB_RXMAXP,	16 },
 	{ "RxCSR",	MUSB_RXCSR,	16 },
 	{ "RxCount",	MUSB_RXCOUNT,	16 },
-	{ "ConfigData",	MUSB_CONFIGDATA,8 },
 	{ "IntrRxE",	MUSB_INTRRXE,	16 },
 	{ "IntrTxE",	MUSB_INTRTXE,	16 },
 	{ "IntrUsbE",	MUSB_INTRUSBE,	8 },
 	{ "DevCtl",	MUSB_DEVCTL,	8 },
-	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
-	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
-	{ "RxFIFOsz",	MUSB_RXFIFOSZ,	8 },
-	{ "TxFIFOadd",	MUSB_TXFIFOADD,	16 },
-	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
 	{ "VControl",	0x68,		32 },
 	{ "HWVers",	0x69,		16 },
-	{ "EPInfo",	MUSB_EPINFO,	8 },
-	{ "RAMInfo",	MUSB_RAMINFO,	8 },
 	{ "LinkInfo",	MUSB_LINKINFO,	8 },
 	{ "VPLen",	MUSB_VPLEN,	8 },
 	{ "HS_EOF1",	MUSB_HS_EOF1,	8 },
@@ -103,6 +95,16 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "DMA_CNTLch7",	0x274,	16 },
 	{ "DMA_ADDRch7",	0x278,	32 },
 	{ "DMA_COUNTch7",	0x27C,	32 },
+#ifndef CONFIG_BLACKFIN
+	{ "ConfigData",	MUSB_CONFIGDATA,8 },
+	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
+	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
+	{ "RxFIFOsz",	MUSB_RXFIFOSZ,	8 },
+	{ "TxFIFOadd",	MUSB_TXFIFOADD,	16 },
+	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
+	{ "EPInfo",	MUSB_EPINFO,	8 },
+	{ "RAMInfo",	MUSB_RAMINFO,	8 },
+#endif
 	{  }	/* Terminating Entry */
 };
 
@@ -197,30 +199,30 @@ static ssize_t musb_test_mode_write(struct file *file,
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (!strncmp(buf, "force host", 9))
+	if (strstarts(buf, "force host"))
 		test = MUSB_TEST_FORCE_HOST;
 
-	if (!strncmp(buf, "fifo access", 11))
+	if (strstarts(buf, "fifo access"))
 		test = MUSB_TEST_FIFO_ACCESS;
 
-	if (!strncmp(buf, "force full-speed", 15))
+	if (strstarts(buf, "force full-speed"))
 		test = MUSB_TEST_FORCE_FS;
 
-	if (!strncmp(buf, "force high-speed", 15))
+	if (strstarts(buf, "force high-speed"))
 		test = MUSB_TEST_FORCE_HS;
 
-	if (!strncmp(buf, "test packet", 10)) {
+	if (strstarts(buf, "test packet")) {
 		test = MUSB_TEST_PACKET;
 		musb_load_testpacket(musb);
 	}
 
-	if (!strncmp(buf, "test K", 6))
+	if (strstarts(buf, "test K"))
 		test = MUSB_TEST_K;
 
-	if (!strncmp(buf, "test J", 6))
+	if (strstarts(buf, "test J"))
 		test = MUSB_TEST_J;
 
-	if (!strncmp(buf, "test SE0 NAK", 12))
+	if (strstarts(buf, "test SE0 NAK"))
 		test = MUSB_TEST_SE0_NAK;
 
 	musb_writeb(musb->mregs, MUSB_TESTMODE, test);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 23d474d3d7f466188bcf4cee8c8f974e4274d22f..883a9adfdfff5f0c1643036e0be7d7d22d1e73a8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2663,7 +2663,6 @@ void musb_host_cleanup(struct musb *musb)
 	if (musb->port_mode == MUSB_PORT_MODE_GADGET)
 		return;
 	usb_remove_hcd(musb->hcd);
-	musb->hcd = NULL;
 }
 
 void musb_host_free(struct musb *musb)
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index 699e38c73d82c2ae76feddfe07f85a54ca76dd73..697a741a0cb1ed36ff336af31d8c3cd7d2fd32a5 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -338,7 +338,6 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
 static void mv_otg_update_state(struct mv_otg *mvotg)
 {
 	struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
-	struct usb_phy *phy = &mvotg->phy;
 	int old_state = mvotg->phy.otg->state;
 
 	switch (old_state) {
@@ -858,10 +857,10 @@ static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct mv_otg *mvotg = platform_get_drvdata(pdev);
 
-	if (mvotg->phy.state != OTG_STATE_B_IDLE) {
+	if (mvotg->phy.otg->state != OTG_STATE_B_IDLE) {
 		dev_info(&pdev->dev,
 			 "OTG state is not B_IDLE, it is %d!\n",
-			 mvotg->phy.state);
+			 mvotg->phy.otg->state);
 		return -EAGAIN;
 	}
 
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index b4066a001ba01573f9546749b7d4978180c48dc5..ccfdfb24b24017e8eda929fb30fb8363311ab7d2 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -34,7 +34,7 @@ static struct usb_phy *__usb_find_phy(struct list_head *list,
 		return phy;
 	}
 
-	return ERR_PTR(-ENODEV);
+	return ERR_PTR(-EPROBE_DEFER);
 }
 
 static struct usb_phy *__usb_find_phy_dev(struct device *dev,
@@ -59,6 +59,9 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node)
 {
 	struct usb_phy  *phy;
 
+	if (!of_device_is_available(node))
+		return ERR_PTR(-ENODEV);
+
 	list_for_each_entry(phy, &phy_list, head) {
 		if (node != phy->dev->of_node)
 			continue;
@@ -66,7 +69,7 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node)
 		return phy;
 	}
 
-	return ERR_PTR(-ENODEV);
+	return ERR_PTR(-EPROBE_DEFER);
 }
 
 static void devm_usb_phy_release(struct device *dev, void *res)
@@ -190,10 +193,13 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __of_usb_find_phy(node);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		if (!IS_ERR(phy))
-			phy = ERR_PTR(-EPROBE_DEFER);
+	if (IS_ERR(phy)) {
+		devres_free(ptr);
+		goto err1;
+	}
 
+	if (!try_module_get(phy->dev->driver->owner)) {
+		phy = ERR_PTR(-ENODEV);
 		devres_free(ptr);
 		goto err1;
 	}
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 8d7fc48b1f307efffa1e5ec40a6e3250b852a54c..29fa1c3d0089bee738ed4f54a8b65d4f82dd0c03 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -46,6 +46,8 @@ static struct console usbcons;
  * ------------------------------------------------------------
  */
 
+static const struct tty_operations usb_console_fake_tty_ops = {
+};
 
 /*
  * The parsing of the command line works exactly like the
@@ -137,13 +139,17 @@ static int usb_console_setup(struct console *co, char *options)
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
-			tty_port_tty_set(&port->port, tty);
 			tty->driver = usb_serial_tty_driver;
 			tty->index = co->index;
+			init_ldsem(&tty->ldisc_sem);
+			INIT_LIST_HEAD(&tty->tty_files);
+			kref_get(&tty->driver->kref);
+			tty->ops = &usb_console_fake_tty_ops;
 			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
-				goto free_tty;
+				goto put_tty;
 			}
+			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -161,7 +167,7 @@ static int usb_console_setup(struct console *co, char *options)
 			serial->type->set_termios(tty, port, &dummy);
 
 			tty_port_tty_set(&port->port, NULL);
-			kfree(tty);
+			tty_kref_put(tty);
 		}
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
@@ -177,8 +183,8 @@ static int usb_console_setup(struct console *co, char *options)
 
  fail:
 	tty_port_tty_set(&port->port, NULL);
- free_tty:
-	kfree(tty);
+ put_tty:
+	tty_kref_put(tty);
  reset_open_count:
 	port->port.count = 0;
 	usb_autopm_put_interface(serial->interface);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6c4eb3cf5efd599653641e5d96d20b05610a6ed5..f4c56fc1a9f64dd32fae247c351c1b34e0d6400e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -120,10 +120,12 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
-	{ USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
+	{ USB_DEVICE(0x10C4, 0x8856) },	/* CEL EM357 ZigBee USB Stick - LR */
+	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 1bd192290b08df0fb697fa91f2517b6756680012..ccf1df7c4b80f3f7a596fa3d1d8904eb64a78db6 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -286,7 +286,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
 
 	res = usb_submit_urb(port->read_urbs[index], mem_flags);
 	if (res) {
-		if (res != -EPERM) {
+		if (res != -EPERM && res != -ENODEV) {
 			dev_err(&port->dev,
 					"%s - usb_submit_urb failed: %d\n",
 					__func__, res);
@@ -373,7 +373,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 							__func__, urb->status);
 		return;
 	default:
-		dev_err(&port->dev, "%s - nonzero urb status: %d\n",
+		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
 							__func__, urb->status);
 		goto resubmit;
 	}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 077c714f1285171ee3b9e4c418e0df42f60cd42c..e07b15ed58148698d939370ac8bf73b20141669a 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -410,6 +410,8 @@ static void	usa26_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -420,7 +422,7 @@ static void	usa26_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -527,6 +529,8 @@ static void	usa28_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -537,7 +541,7 @@ static void	usa28_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 		/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -607,6 +611,8 @@ static void	usa49_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->portNumber];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -617,7 +623,7 @@ static void	usa49_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -855,6 +861,8 @@ static void	usa90_instat_callback(struct urb *urb)
 
 	port = serial->port[0];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -865,7 +873,7 @@ static void	usa90_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -926,6 +934,8 @@ static void	usa67_instat_callback(struct urb *urb)
 
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -934,7 +944,7 @@ static void	usa67_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7a4c21b4f67613f7bf64839b4cf4faf09804355e..efdcee15b52030e455ce3c6e17d401d4a5e2660d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -234,6 +234,8 @@ static void option_instat_callback(struct urb *urb);
 
 #define QUALCOMM_VENDOR_ID			0x05C6
 
+#define SIERRA_VENDOR_ID			0x1199
+
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001
 #define CMOTECH_PRODUCT_CMU_300			0x6002
@@ -512,7 +514,7 @@ enum option_blacklist_reason {
 		OPTION_BLACKLIST_RESERVED_IF = 2
 };
 
-#define MAX_BL_NUM  8
+#define MAX_BL_NUM  11
 struct option_blacklist_info {
 	/* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */
 	const unsigned long sendsetup;
@@ -601,6 +603,11 @@ static const struct option_blacklist_info telit_le920_blacklist = {
 	.reserved = BIT(1) | BIT(5),
 };
 
+static const struct option_blacklist_info sierra_mc73xx_blacklist = {
+	.sendsetup = BIT(0) | BIT(2),
+	.reserved = BIT(8) | BIT(10) | BIT(11),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1098,6 +1105,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
+	{ USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
+	  .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index cb3e14780a7e0c6182e5f9bf3ad505b61fa75684..9c63897b3a564012ea63f99b9e5e73bc48b93d36 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -142,7 +142,6 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x0f3d, 0x68a2)},	/* Sierra Wireless MC7700 */
 	{DEVICE_SWI(0x114f, 0x68a2)},	/* Sierra Wireless MC7750 */
 	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
-	{DEVICE_SWI(0x1199, 0x68c0)},	/* Sierra Wireless MC73xx */
 	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
 	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
 	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 8a6f371ed6e77e3ccdc99632c3cd41ebeb155213..9893d696fc973e9e4183b57b56b3ceb22570942f 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -69,16 +69,39 @@ static int uas_use_uas_driver(struct usb_interface *intf,
 		return 0;
 
 	/*
-	 * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is
-	 * broken on the ASM1051, use the number of streams to differentiate.
-	 * New ASM1053-s also support 32 streams, but have a different prod-id.
+	 * ASMedia has a number of usb3 to sata bridge chips, at the time of
+	 * this writing the following versions exist:
+	 * ASM1051 - no uas support version
+	 * ASM1051 - with broken (*) uas support
+	 * ASM1053 - with working uas support
+	 * ASM1153 - with working uas support
+	 *
+	 * Devices with these chips re-use a number of device-ids over the
+	 * entire line, so the device-id is useless to determine if we're
+	 * dealing with an ASM1051 (which we want to avoid).
+	 *
+	 * The ASM1153 can be identified by config.MaxPower == 0,
+	 * where as the ASM105x models have config.MaxPower == 36.
+	 *
+	 * Differentiating between the ASM1053 and ASM1051 is trickier, when
+	 * connected over USB-3 we can look at the number of streams supported,
+	 * ASM1051 supports 32 streams, where as early ASM1053 versions support
+	 * 16 streams, newer ASM1053-s also support 32 streams, but have a
+	 * different prod-id.
+	 *
+	 * (*) ASM1051 chips do work with UAS with some disks (with the
+	 *     US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
 	 */
 	if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
-			le16_to_cpu(udev->descriptor.idProduct) == 0x55aa) {
-		if (udev->speed < USB_SPEED_SUPER) {
+			(le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
+			 le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
+		if (udev->actconfig->desc.bMaxPower == 0) {
+			/* ASM1153, do nothing */
+		} else if (udev->speed < USB_SPEED_SUPER) {
 			/* No streams info, assume ASM1051 */
 			flags |= US_FL_IGNORE_UAS;
 		} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+			/* Possibly an ASM1051, disable uas */
 			flags |= US_FL_IGNORE_UAS;
 		}
 	}
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 18a283d6de1c8bd18663b57bbf7499510c49fa2d..6df4357d9ee358b36d33961507e8677bd346d432 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -40,6 +40,16 @@
  * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>
  */
 
+/*
+ * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
+ * commands in UAS mode.  Observed with the 1.28 firmware; are there others?
+ */
+UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128,
+		"Apricorn",
+		"",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
 UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999,
 		"Seagate",
@@ -68,6 +78,20 @@ UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: Marcin Zajączkowski <mszpak@wp.pl> */
+UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999,
+		"Seagate",
+		"Backup Plus",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0xa0a4, 0x0000, 0x9999,
+		"Seagate",
+		"Backup Plus Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* https://bbs.archlinux.org/viewtopic.php?id=183190 */
 UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
 		"Seagate",
@@ -82,6 +106,13 @@ UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com> */
+UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
+		"Seagate",
+		"BUP Fast HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
 UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		"JMicron",
@@ -89,14 +120,6 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES),
 
-/* Most ASM1051 based devices have issues with uas, blacklist them all */
-/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999,
-		"ASMedia",
-		"ASM1051",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_IGNORE_UAS),
-
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
 		"VIA",
@@ -104,6 +127,13 @@ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: Takeo Nakayama <javhera@gmx.com> */
+UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
+		"JMicron",
+		"JMS566",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
 		"Hitachi",
diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h
index e9e6cfbfbb589d0393060e2fed0422ec402dd612..eb7d4a135a9ea71364105c0bade762b5f06b67da 100644
--- a/include/linux/phy/omap_control_phy.h
+++ b/include/linux/phy/omap_control_phy.h
@@ -66,7 +66,7 @@ enum omap_control_usb_mode {
 #define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF	0x0
 
 #define	OMAP_CTRL_PCIE_PCS_MASK			0xff
-#define	OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT	0x8
+#define	OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT	16
 
 #define OMAP_CTRL_USB2_PHY_PD		BIT(28)
 
@@ -79,7 +79,7 @@ enum omap_control_usb_mode {
 void omap_control_phy_power(struct device *dev, int on);
 void omap_control_usb_set_mode(struct device *dev,
 			       enum omap_control_usb_mode mode);
-void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay);
+void omap_control_pcie_pcs(struct device *dev, u8 delay);
 #else
 
 static inline void omap_control_phy_power(struct device *dev, int on)
@@ -91,7 +91,7 @@ static inline void omap_control_usb_set_mode(struct device *dev,
 {
 }
 
-static inline void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
+static inline void omap_control_pcie_pcs(struct device *dev, u8 delay)
 {
 }
 #endif