提交 76befb8c 编写于 作者: B Ben Skeggs

drm/nv50: fix instmem binding on IGPs to point at stolen system memory

This also modifies the unused PRAMIN PT entries to be all zeroes, can't
really recall why I used 9/0 initially, just that it didn't work for
some reason.  It was likely masking a bug elsewhere that's since been
fixed.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
上级 531e7713
......@@ -583,6 +583,7 @@ struct drm_nouveau_private {
uint64_t vm_end;
struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
int vm_vram_pt_nr;
uint64_t vram_sys_base;
/* the mtrr covering the FB */
int fb_mtrr;
......
......@@ -76,6 +76,11 @@ nv50_instmem_init(struct drm_device *dev)
for (i = 0x1700; i <= 0x1710; i += 4)
priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i);
if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
else
dev_priv->vram_sys_base = 0;
/* Reserve the last MiB of VRAM, we should probably try to avoid
* setting up the below tables over the top of the VBIOS image at
* some point.
......@@ -176,12 +181,24 @@ nv50_instmem_init(struct drm_device *dev)
if (ret)
return ret;
for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) {
if (v < (c_offset + c_size))
BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1);
else
BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009);
v = c_offset | 1;
if (dev_priv->vram_sys_base) {
v += dev_priv->vram_sys_base;
v |= 0x30;
}
i = 0;
while (v < dev_priv->vram_sys_base + c_offset + c_size) {
BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v);
BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
v += 0x1000;
i += 8;
}
while (i < pt_size) {
BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000);
BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
i += 8;
}
BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63);
......@@ -416,7 +433,9 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
uint32_t pte, pte_end, vram;
struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj;
uint32_t pte, pte_end;
uint64_t vram;
if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
return -EINVAL;
......@@ -424,20 +443,24 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n",
gpuobj->im_pramin->start, gpuobj->im_pramin->size);
pte = (gpuobj->im_pramin->start >> 12) << 3;
pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
pte = (gpuobj->im_pramin->start >> 12) << 1;
pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
vram = gpuobj->im_backing_start;
NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n",
gpuobj->im_pramin->start, pte, pte_end);
NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
vram |= 1;
if (dev_priv->vram_sys_base) {
vram += dev_priv->vram_sys_base;
vram |= 0x30;
}
dev_priv->engine.instmem.prepare_access(dev, true);
while (pte < pte_end) {
nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1);
nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
pte += 8;
nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram));
nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram));
vram += NV50_INSTMEM_PAGE_SIZE;
}
dev_priv->engine.instmem.finish_access(dev);
......@@ -470,14 +493,13 @@ nv50_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
if (gpuobj->im_bound == 0)
return -EINVAL;
pte = (gpuobj->im_pramin->start >> 12) << 3;
pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
pte = (gpuobj->im_pramin->start >> 12) << 1;
pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
dev_priv->engine.instmem.prepare_access(dev, true);
while (pte < pte_end) {
nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009);
nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
pte += 8;
nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
}
dev_priv->engine.instmem.finish_access(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册