bnx2x: New multi-function mode: UFP

Add support for a new multi-function mode based on the Unified Fabric Port
system specifications.
Support includes configuration of:
  1. Outer vlan tags.
  2. Bandwidth settings.
  3. Virtual link enable/disable.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1448,6 +1448,11 @@ struct bnx2x_fp_stats {
 	struct bnx2x_eth_q_stats_old eth_q_stats_old;
 };
 
+enum {
+	SUB_MF_MODE_UNKNOWN = 0,
+	SUB_MF_MODE_UFP,
+};
+
 struct bnx2x {
 	/* Fields used in the tx and intr/napi performance paths
 	 * are grouped together in the beginning of the structure
@@ -1659,6 +1664,9 @@ struct bnx2x {
 #define IS_MF_SI(bp)		(bp->mf_mode == MULTI_FUNCTION_SI)
 #define IS_MF_SD(bp)		(bp->mf_mode == MULTI_FUNCTION_SD)
 #define IS_MF_AFEX(bp)		(bp->mf_mode == MULTI_FUNCTION_AFEX)
+	u8			mf_sub_mode;
+#define IS_MF_UFP(bp)		(IS_MF_SD(bp) && \
+				 bp->mf_sub_mode == SUB_MF_MODE_UFP)
 
 	u8			wol;
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -936,6 +936,12 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
 	start_params->gre_tunnel_type	= IPGRE_TUNNEL;
 	start_params->inner_gre_rss_en	= 1;
 
+	if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
+		start_params->class_fail_ethtype = ETH_P_FIP;
+		start_params->class_fail = 1;
+		start_params->no_added_tags = 1;
+	}
+
 	return bnx2x_func_state_change(bp, &func_params);
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h

@@ -859,6 +859,7 @@ struct shared_feat_cfg {		 /* NVRAM Offset */
 		#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4          0x00000200
 		#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT  0x00000300
 		#define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE      0x00000400
+		#define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE       0x00000600
 
 	/* The interval in seconds between sending LLDP packets. Set to zero
 	   to disable the feature */
@@ -1268,6 +1269,10 @@ struct drv_func_mb {
 	#define DRV_MSG_CODE_GET_UPGRADE_KEY            0x81000000
 	#define DRV_MSG_CODE_GET_MANUF_KEY              0x82000000
 	#define DRV_MSG_CODE_LOAD_L2B_PRAM              0x90000000
+	#define DRV_MSG_CODE_OEM_OK			0x00010000
+	#define DRV_MSG_CODE_OEM_FAILURE		0x00020000
+	#define DRV_MSG_CODE_OEM_UPDATE_SVID_OK		0x00030000
+	#define DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE	0x00040000
 	/*
 	 * The optic module verification command requires bootcode
 	 * v5.0.6 or later, te specific optic module verification command
@@ -1423,6 +1428,12 @@ struct drv_func_mb {
 	#define DRV_STATUS_SET_MF_BW                    0x00000004
 	#define DRV_STATUS_LINK_EVENT                   0x00000008
 
+	#define DRV_STATUS_OEM_EVENT_MASK               0x00000070
+	#define DRV_STATUS_OEM_DISABLE_ENABLE_PF        0x00000010
+	#define DRV_STATUS_OEM_BANDWIDTH_ALLOCATION     0x00000020
+
+	#define DRV_STATUS_OEM_UPDATE_SVID              0x00000080
+
 	#define DRV_STATUS_DCC_EVENT_MASK               0x0000ff00
 	#define DRV_STATUS_DCC_DISABLE_ENABLE_PF        0x00000100
 	#define DRV_STATUS_DCC_BANDWIDTH_ALLOCATION     0x00000200

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -2905,6 +2905,57 @@ static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd)
 	}
 }
 
+static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
+{
+	struct bnx2x_func_switch_update_params *switch_update_params;
+	struct bnx2x_func_state_params func_params;
+
+	memset(&func_params, 0, sizeof(struct bnx2x_func_state_params));
+	switch_update_params = &func_params.params.switch_update;
+	func_params.f_obj = &bp->func_obj;
+	func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
+
+	if (IS_MF_UFP(bp)) {
+		int func = BP_ABS_FUNC(bp);
+		u32 val;
+
+		/* Re-learn the S-tag from shmem */
+		val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
+				FUNC_MF_CFG_E1HOV_TAG_MASK;
+		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+			bp->mf_ov = val;
+		} else {
+			BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n");
+			goto fail;
+		}
+
+		/* Configure new S-tag in LLH */
+		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8,
+		       bp->mf_ov);
+
+		/* Send Ramrod to update FW of change */
+		__set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
+			  &switch_update_params->changes);
+		switch_update_params->vlan = bp->mf_ov;
+
+		if (bnx2x_func_state_change(bp, &func_params) < 0) {
+			BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
+				  bp->mf_ov);
+			goto fail;
+		}
+
+		DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov);
+
+		bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
+
+		return;
+	}
+
+	/* not supported by SW yet */
+fail:
+	bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
+}
+
 static void bnx2x_pmf_update(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
@@ -3297,7 +3348,8 @@ static void bnx2x_e1h_enable(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
 
-	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
+	if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
 
 	/* Tx queue should be only re-enabled */
 	netif_tx_wake_all_queues(bp->dev);
@@ -3652,14 +3704,30 @@ void bnx2x_update_mng_version(struct bnx2x *bp)
 	   ethver, iscsiver, fcoever);
 }
 
-static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
+static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
 {
-	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
+	u32 cmd_ok, cmd_fail;
+
+	/* sanity */
+	if (event & DRV_STATUS_DCC_EVENT_MASK &&
+	    event & DRV_STATUS_OEM_EVENT_MASK) {
+		BNX2X_ERR("Received simultaneous events %08x\n", event);
+		return;
+	}
+
+	if (event & DRV_STATUS_DCC_EVENT_MASK) {
+		cmd_fail = DRV_MSG_CODE_DCC_FAILURE;
+		cmd_ok = DRV_MSG_CODE_DCC_OK;
+	} else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ {
+		cmd_fail = DRV_MSG_CODE_OEM_FAILURE;
+		cmd_ok = DRV_MSG_CODE_OEM_OK;
+	}
 
-	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
+	DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event);
 
-		/*
-		 * This is the only place besides the function initialization
+	if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF |
+		     DRV_STATUS_OEM_DISABLE_ENABLE_PF)) {
+		/* This is the only place besides the function initialization
 		 * where the bp->flags can change so it is done without any
 		 * locks
 		 */
@@ -3674,18 +3742,22 @@ static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
 
 			bnx2x_e1h_enable(bp);
 		}
-		dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
+		event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF |
+			   DRV_STATUS_OEM_DISABLE_ENABLE_PF);
 	}
-	if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
+
+	if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
+		     DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) {
 		bnx2x_config_mf_bw(bp);
-		dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
+		event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION |
+			   DRV_STATUS_OEM_BANDWIDTH_ALLOCATION);
 	}
 
 	/* Report results to MCP */
-	if (dcc_event)
-		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE, 0);
+	if (event)
+		bnx2x_fw_command(bp, cmd_fail, 0);
 	else
-		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK, 0);
+		bnx2x_fw_command(bp, cmd_ok, 0);
 }
 
 /* must be called under the spq lock */
@@ -4167,9 +4239,12 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 					func_mf_config[BP_ABS_FUNC(bp)].config);
 			val = SHMEM_RD(bp,
 				       func_mb[BP_FW_MB_IDX(bp)].drv_status);
-			if (val & DRV_STATUS_DCC_EVENT_MASK)
-				bnx2x_dcc_event(bp,
-					    (val & DRV_STATUS_DCC_EVENT_MASK));
+
+			if (val & (DRV_STATUS_DCC_EVENT_MASK |
+				   DRV_STATUS_OEM_EVENT_MASK))
+				bnx2x_oem_event(bp,
+					(val & (DRV_STATUS_DCC_EVENT_MASK |
+						DRV_STATUS_OEM_EVENT_MASK)));
 
 			if (val & DRV_STATUS_SET_MF_BW)
 				bnx2x_set_mf_bw(bp);
@@ -4195,6 +4270,10 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 					val & DRV_STATUS_AFEX_EVENT_MASK);
 			if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
 				bnx2x_handle_eee_event(bp);
+
+			if (val & DRV_STATUS_OEM_UPDATE_SVID)
+				bnx2x_handle_update_svid_cmd(bp);
+
 			if (bp->link_vars.periodic_flags &
 			    PERIODIC_FLAGS_LINK_EVENT) {
 				/*  sync with link */
@@ -7930,8 +8009,11 @@ static int bnx2x_init_hw_func(struct bnx2x *bp)
 		REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1);
 
 	if (IS_MF(bp)) {
-		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
-		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->mf_ov);
+		if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) {
+			REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
+			REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8,
+			       bp->mf_ov);
+		}
 	}
 
 	bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase);
@@ -11626,6 +11708,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 
 	bp->mf_ov = 0;
 	bp->mf_mode = 0;
+	bp->mf_sub_mode = 0;
 	vn = BP_VN(bp);
 
 	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
@@ -11691,6 +11774,13 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 				} else
 					BNX2X_DEV_INFO("illegal OV for SD\n");
 				break;
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
+				bp->mf_mode = MULTI_FUNCTION_SD;
+				bp->mf_sub_mode = SUB_MF_MODE_UFP;
+				bp->mf_config[vn] =
+					MF_CFG_RD(bp,
+						  func_mf_config[func].config);
+				break;
 			case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
 				bp->mf_config[vn] = 0;
 				break;
@@ -11714,6 +11804,11 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 
 				BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
 					       func, bp->mf_ov, bp->mf_ov);
+			} else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) {
+				dev_err(&bp->pdev->dev,
+					"Unexpected - no valid MF OV for func %d in UFP mode\n",
+					func);
+				bp->path_has_ovlan = true;
 			} else {
 				dev_err(&bp->pdev->dev,
 					"No valid MF OV for func %d, aborting\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -5673,8 +5673,23 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 	rdata->gre_tunnel_type	= start_params->gre_tunnel_type;
 	rdata->inner_gre_rss_en = start_params->inner_gre_rss_en;
 	rdata->vxlan_dst_port	= cpu_to_le16(4789);
-	rdata->sd_vlan_eth_type = cpu_to_le16(0x8100);
+	rdata->sd_accept_mf_clss_fail = start_params->class_fail;
+	if (start_params->class_fail_ethtype) {
+		rdata->sd_accept_mf_clss_fail_match_ethtype = 1;
+		rdata->sd_accept_mf_clss_fail_ethtype =
+			cpu_to_le16(start_params->class_fail_ethtype);
+	}
+
+	rdata->sd_vlan_force_pri_flg = start_params->sd_vlan_force_pri;
+	rdata->sd_vlan_force_pri_val = start_params->sd_vlan_force_pri_val;
+	if (start_params->sd_vlan_eth_type)
+		rdata->sd_vlan_eth_type =
+			cpu_to_le16(start_params->sd_vlan_eth_type);
+	else
+		rdata->sd_vlan_eth_type =
+			cpu_to_le16(0x8100);
 
+	rdata->no_added_tags = start_params->no_added_tags;
 	/* No need for an explicit memory barrier here as long we would
 	 * need to ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
@@ -5708,6 +5723,30 @@ static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
 				 &switch_update_params->changes);
 	}
 
+	if (test_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
+		     &switch_update_params->changes)) {
+		rdata->sd_vlan_tag_change_flg = 1;
+		rdata->sd_vlan_tag =
+			cpu_to_le16(switch_update_params->vlan);
+	}
+
+	if (test_bit(BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG,
+		     &switch_update_params->changes)) {
+		rdata->sd_vlan_eth_type_change_flg = 1;
+		rdata->sd_vlan_eth_type =
+			cpu_to_le16(switch_update_params->vlan_eth_type);
+	}
+
+	if (test_bit(BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
+		     &switch_update_params->changes)) {
+		rdata->sd_vlan_force_pri_change_flg = 1;
+		if (test_bit(BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
+			     &switch_update_params->changes))
+			rdata->sd_vlan_force_pri_flg = 1;
+		rdata->sd_vlan_force_pri_flg =
+			switch_update_params->vlan_force_prio;
+	}
+
 	if (test_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
 		     &switch_update_params->changes)) {
 		rdata->update_tunn_cfg_flg = 1;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h

@@ -1098,6 +1098,10 @@ struct bnx2x_queue_sp_obj {
 enum {
 	BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG,
 	BNX2X_F_UPDATE_TX_SWITCH_SUSPEND,
+	BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
+	BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG,
+	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
+	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
 	BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
 	BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
 	BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
@@ -1178,10 +1182,29 @@ struct bnx2x_func_start_params {
 	 * capailities
 	 */
 	u8 inner_gre_rss_en;
+
+	/* Allows accepting of packets failing MF classification, possibly
+	 * only matching a given ethertype
+	 */
+	u8 class_fail;
+	u16 class_fail_ethtype;
+
+	/* Override priority of output packets */
+	u8 sd_vlan_force_pri;
+	u8 sd_vlan_force_pri_val;
+
+	/* Replace vlan's ethertype */
+	u16 sd_vlan_eth_type;
+
+	/* Prevent inner vlans from being added by FW */
+	u8 no_added_tags;
 };
 
 struct bnx2x_func_switch_update_params {
 	unsigned long changes; /* BNX2X_F_UPDATE_XX bits */
+	u16 vlan;
+	u16 vlan_eth_type;
+	u8 vlan_force_prio;
 	u8 tunnel_mode;
 	u8 gre_tunnel_type;
 };