From 72d66afd1461effb143784a0f6cde2a9f9908b70 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Fri, 30 Mar 2012 19:46:39 +0800 Subject: [PATCH] drm/i915/intel_i2c: use WAIT cycle, not STOP The i915 is only able to generate a STOP cycle (i.e. finalize an i2c transaction) during a DATA or WAIT phase. In other words, the controller rejects a STOP requested as part of the first transaction in a sequence. Thus, for the first transaction we must always use a WAIT cycle, detect when the device has finished (and is in a WAIT phase), and then either start the next transaction, or, if there are no more transactions, generate a STOP cycle. Note: Theoretically, the last transaction of a multi-transaction sequence could initiate a STOP cycle. However, this slight optimization is left for another patch. We return -ETIMEDOUT if the hardware doesn't deactivate after the STOP cycle. Signed-off-by: Daniel Kurtz [danvet: added comment to the code that gmbus can't generate STOP on the very first cycle.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 33 +++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 9707868881ec..291e51ec309b 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -204,8 +204,7 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) } static int -gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg, - bool last) +gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg) { int reg_offset = dev_priv->gpio_mmio_base; u16 len = msg->len; @@ -213,7 +212,6 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg, I915_WRITE(GMBUS1 + reg_offset, GMBUS_CYCLE_WAIT | - (last ? GMBUS_CYCLE_STOP : 0) | (len << GMBUS_BYTE_COUNT_SHIFT) | (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_READ | GMBUS_SW_RDY); @@ -239,8 +237,7 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg, } static int -gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg, - bool last) +gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg) { int reg_offset = dev_priv->gpio_mmio_base; u16 len = msg->len; @@ -256,7 +253,6 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg, I915_WRITE(GMBUS3 + reg_offset, val); I915_WRITE(GMBUS1 + reg_offset, GMBUS_CYCLE_WAIT | - (last ? GMBUS_CYCLE_STOP : 0) | (msg->len << GMBUS_BYTE_COUNT_SHIFT) | (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_WRITE | GMBUS_SW_RDY); @@ -289,7 +285,8 @@ gmbus_xfer(struct i2c_adapter *adapter, struct intel_gmbus, adapter); struct drm_i915_private *dev_priv = bus->dev_priv; - int i, reg_offset, ret; + int i, reg_offset; + int ret = 0; mutex_lock(&dev_priv->gmbus_mutex); @@ -303,20 +300,17 @@ gmbus_xfer(struct i2c_adapter *adapter, I915_WRITE(GMBUS0 + reg_offset, bus->reg0); for (i = 0; i < num; i++) { - bool last = i + 1 == num; - if (msgs[i].flags & I2C_M_RD) - ret = gmbus_xfer_read(dev_priv, &msgs[i], last); + ret = gmbus_xfer_read(dev_priv, &msgs[i]); else - ret = gmbus_xfer_write(dev_priv, &msgs[i], last); + ret = gmbus_xfer_write(dev_priv, &msgs[i]); if (ret == -ETIMEDOUT) goto timeout; if (ret == -ENXIO) goto clear_err; - if (!last && - wait_for(I915_READ(GMBUS2 + reg_offset) & + if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50)) goto timeout; @@ -324,15 +318,24 @@ gmbus_xfer(struct i2c_adapter *adapter, goto clear_err; } + /* Generate a STOP condition on the bus. Note that gmbus can't generata + * a STOP on the very first cycle. To simplify the code we + * unconditionally generate the STOP condition with an additional gmbus + * cycle. */ + I915_WRITE(GMBUS1 + reg_offset, GMBUS_CYCLE_STOP | GMBUS_SW_RDY); + /* Mark the GMBUS interface as disabled after waiting for idle. * We will re-enable it at the start of the next xfer, * till then let it sleep. */ - if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10)) + if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, + 10)) { DRM_INFO("GMBUS [%s] timed out waiting for idle\n", adapter->name); + ret = -ETIMEDOUT; + } I915_WRITE(GMBUS0 + reg_offset, 0); - ret = i; + ret = ret ?: i; goto out; clear_err: -- GitLab