Merge tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:

1. Set chosen serial bitrate which allows proper serial output when
   bootloader does pass all the data in command line.
2. Cleanup.

* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
  ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt

@@ -9,7 +9,7 @@ Required properties:
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
-- hpd-gpio: following information about the hotplug gpio pin.
+- hpd-gpios: following information about the hotplug gpio pin.
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
@@ -56,7 +56,7 @@ Example:
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x100000>;
 		interrupts = <0 95 0>;
-		hpd-gpio = <&gpx3 7 1>;
+		hpd-gpios = <&gpx3 7 1>;
 		ddc = <&hdmi_ddc_node>;
 		phy = <&hdmi_phy_node>;
 		samsung,syscon-phandle = <&pmu_system_controller>;

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -269,7 +269,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	hdmi-en-supply = <&hdmi_en>;

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -227,7 +227,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -152,7 +152,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -116,7 +116,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
 
 &i2c_0 {

arch/arm/boot/dts/exynos5250-snow-common.dtsi

@@ -260,7 +260,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;

arch/arm/boot/dts/exynos5250-spring.dts

@@ -91,7 +91,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;

arch/arm/boot/dts/exynos5410-odroidxu.dts

@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	emmc_pwrseq: pwrseq {

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -179,7 +179,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -130,7 +130,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };

arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi

@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@02073000 {
@@ -250,7 +250,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -179,7 +179,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;