Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1050,14 +1050,28 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_MIPS32
-	bool "MIPS32"
+config CPU_MIPS32_R1
+	bool "MIPS32 Release 1"
 	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_HAS_PREFETCH
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
-config CPU_MIPS64
-	bool "MIPS64"
+config CPU_MIPS64_R1
+	bool "MIPS64 Release 1"
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_HAS_PREFETCH
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
 config CPU_R3000
 	bool "R3000"
@@ -1253,7 +1267,7 @@ config SB1_PASS_2_1_WORKAROUNDS
 
 config 64BIT_PHYS_ADDR
 	bool "Support for 64-bit physical address space"
-	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
 
 config CPU_ADVANCED
 	bool "Override CPU Options"
@@ -1276,7 +1290,7 @@ config CPU_HAS_LLSC
 
 config CPU_HAS_LLDSCD
 	bool "lld/scd Instructions available" if CPU_ADVANCED
-	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
 	help
 	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
 	  equivalents of ll and sc.  Say Y here for better performance, N if

arch/mips/Makefile

@@ -182,11 +182,11 @@ cflags-$(CONFIG_CPU_TX49XX)	+= \
 			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS32)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
 			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS64)	+= \
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
 			-Wa,--trap
 

arch/mips/kernel/Makefile

@@ -28,8 +28,8 @@ obj-$(CONFIG_CPU_RM9000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_NEVADA)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R10000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_SB1)		+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS32)	+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS64)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS32_R1)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS64_R1)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o

arch/mips/kernel/r4k_switch.S

@@ -165,7 +165,7 @@ LEAF(_init_fpu)
 1:
 #endif
 
-#ifdef CONFIG_CPU_MIPS32
+#ifdef CONFIG_CPU_MIPS32_R1
 	mtc1	t1, $f0
 	mtc1	t1, $f1
 	mtc1	t1, $f2

arch/mips/kernel/traps.c

@@ -864,7 +864,7 @@ asmlinkage void cache_parity_error(void)
 	       reg_val & (1<<22) ? "E0 " : "");
 	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
 
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32_R1) || defined(CONFIG_CPU_MIPS64_R1)
 	if (reg_val & (1<<22))
 		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
 

arch/mips/lib-32/Makefile

@@ -4,8 +4,8 @@
 
 lib-y	+= csum_partial.o memset.o watch.o
 
-obj-$(CONFIG_CPU_MIPS32)	+= dump_tlb.o
-obj-$(CONFIG_CPU_MIPS64)	+= dump_tlb.o
+obj-$(CONFIG_CPU_MIPS32_R1)	+= dump_tlb.o
+obj-$(CONFIG_CPU_MIPS64_R1)	+= dump_tlb.o
 obj-$(CONFIG_CPU_NEVADA)	+= dump_tlb.o
 obj-$(CONFIG_CPU_R10000)	+= dump_tlb.o
 obj-$(CONFIG_CPU_R3000)		+= r3k_dump_tlb.o

arch/mips/lib-64/Makefile

@@ -4,8 +4,8 @@
 
 lib-y	+= csum_partial.o memset.o watch.o
 
-obj-$(CONFIG_CPU_MIPS32)	+= dump_tlb.o
-obj-$(CONFIG_CPU_MIPS64)	+= dump_tlb.o
+obj-$(CONFIG_CPU_MIPS32_R1)	+= dump_tlb.o
+obj-$(CONFIG_CPU_MIPS64_R1)	+= dump_tlb.o
 obj-$(CONFIG_CPU_NEVADA)	+= dump_tlb.o
 obj-$(CONFIG_CPU_R10000)	+= dump_tlb.o
 obj-$(CONFIG_CPU_R3000)		+= r3k_dump_tlb.o

arch/mips/mm/Makefile

@@ -9,8 +9,8 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
-obj-$(CONFIG_CPU_MIPS32)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_MIPS64)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS32_R1)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS64_R1)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_NEVADA)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_R10000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-andes.o
 obj-$(CONFIG_CPU_R3000)		+= c-r3k.o tlb-r3k.o pg-r4k.o

arch/mips/mm/cache.c

@@ -118,8 +118,8 @@ void __init cpu_cache_init(void)
 #if defined(CONFIG_CPU_R4X00)  || defined(CONFIG_CPU_VR41XX) || \
     defined(CONFIG_CPU_R4300)  || defined(CONFIG_CPU_R5000)  || \
     defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432)  || \
-    defined(CONFIG_CPU_R5500)  || defined(CONFIG_CPU_MIPS32) || \
-    defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
+    defined(CONFIG_CPU_R5500)  || defined(CONFIG_CPU_MIPS32_R1) || \
+    defined(CONFIG_CPU_MIPS64_R1) || defined(CONFIG_CPU_TX49XX) || \
     defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
 		ld_mmu_r4xx0();
 #endif

arch/mips/mm/tlb-r4k.c

@@ -263,7 +263,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 	write_c0_entrylo0(ptep->pte_high);
 	ptep++;
 	write_c0_entrylo1(ptep->pte_high);

arch/mips/mm/tlb-sb1.c

@@ -320,7 +320,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 	write_c0_entrylo0(ptep->pte_high);
 	ptep++;
 	write_c0_entrylo1(ptep->pte_high);

arch/mips/oprofile/Makefile

@@ -10,6 +10,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 
 oprofile-y				:= $(DRIVER_OBJS) common.o
 
-oprofile-$(CONFIG_CPU_MIPS32)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_MIPS32_R1)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_MIPS64_R1)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_RM9000)		+= op_model_rm9000.o

include/asm-mips/addrspace.h

@@ -131,7 +131,7 @@
     || defined (CONFIG_CPU_R5000)					\
     || defined (CONFIG_CPU_NEVADA)					\
     || defined (CONFIG_CPU_TX49XX)					\
-    || defined (CONFIG_CPU_MIPS64)
+    || defined (CONFIG_CPU_MIPS64_R1)
 #define KUSIZE		_LLCONST_(0x0000010000000000)	/* 2^^40 */
 #define KUSIZE_64	_LLCONST_(0x0000010000000000)	/* 2^^40 */
 #define K0SIZE		_LLCONST_(0x0000001000000000)	/* 2^^36 */

include/asm-mips/mach-mips/cpu-feature-overrides.h

@@ -14,7 +14,7 @@
 /*
  * CPU feature overrides for MIPS boards
  */
-#ifdef CONFIG_CPU_MIPS32
+#ifdef CONFIG_CPU_MIPS32_R1
 #define cpu_has_tlb		1
 #define cpu_has_4kex		1
 #define cpu_has_4ktlb		1
@@ -39,7 +39,7 @@
 /* #define cpu_has_subset_pcaches ? */
 #endif
 
-#ifdef CONFIG_CPU_MIPS64
+#ifdef CONFIG_CPU_MIPS64_R1
 #define cpu_has_tlb		1
 #define cpu_has_4kex		1
 #define cpu_has_4ktlb		1

include/asm-mips/page.h

@@ -76,7 +76,7 @@ static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
  * These are used to make use of C type-checking..
  */
 #ifdef CONFIG_64BIT_PHYS_ADDR
-  #ifdef CONFIG_CPU_MIPS32
+  #ifdef CONFIG_CPU_MIPS32_R1
     typedef struct { unsigned long pte_low, pte_high; } pte_t;
     #define pte_val(x)    ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
   #else

include/asm-mips/pgtable-32.h

@@ -116,7 +116,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
 }
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 static inline pte_t
@@ -139,7 +139,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 #define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 #endif
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */
 
 #define __pgd_offset(address)	pgd_index(address)
 #define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
@@ -202,7 +202,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
  */
 #define PTE_FILE_MAX_BITS	27
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 	/* fixme */
 #define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
 #define pgoff_to_pte(off) \

include/asm-mips/pgtable-bits.h

@@ -33,7 +33,7 @@
  * unpredictable things.  The code (when it is written) to deal with
  * this problem will be in the update_mmu_cache() code for the r4k.
  */
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
 
 #define _PAGE_PRESENT               (1<<6)  /* implemented in software */
 #define _PAGE_READ                  (1<<7)  /* implemented in software */
@@ -123,7 +123,7 @@
 
 #endif
 #endif
-#endif /* defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR) */
+#endif /* defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) */
 
 #define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
 #define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
@@ -140,7 +140,7 @@
 #define PAGE_CACHABLE_DEFAULT	_CACHE_CACHABLE_COW
 #endif
 
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
 #define CONF_CM_DEFAULT		(PAGE_CACHABLE_DEFAULT >> 3)
 #else
 #define CONF_CM_DEFAULT		(PAGE_CACHABLE_DEFAULT >> 9)

include/asm-mips/pgtable.h

@@ -82,7 +82,7 @@ extern void paging_init(void);
 #define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 static inline void set_pte(pte_t *ptep, pte_t pte)
 {
 	ptep->pte_high = pte.pte_high;
@@ -170,7 +170,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  * Undefined behaviour if not..
  */
 static inline int pte_user(pte_t pte)	{ BUG(); return 0; }
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 static inline int pte_read(pte_t pte)	{ return (pte).pte_low & _PAGE_READ; }
 static inline int pte_write(pte_t pte)	{ return (pte).pte_low & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return (pte).pte_low & _PAGE_MODIFIED; }
@@ -329,7 +329,7 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot)
  */
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte.pte_low &= _PAGE_CHG_MASK;