From 6e16d9409e1f08594587855d2a280c391ba985ff Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 7 Jan 2007 16:07:48 +0100 Subject: [PATCH] [PARISC] Convert soft power switch driver to kthread And remove it's reference in time.c. Allow lcd_print() to take a const char *. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/time.c | 4 - drivers/parisc/led.c | 2 +- drivers/parisc/power.c | 201 +++++++++++++++++--------------------- include/asm-parisc/led.h | 2 +- 4 files changed, 91 insertions(+), 118 deletions(-) diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index c33b6e0f7c47..ccdce6ef67cc 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -148,10 +148,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) write_sequnlock(&xtime_lock); } - /* check soft power switch status */ - if (cpu == 0 && !atomic_read(&power_tasklet.count)) - tasklet_schedule(&power_tasklet); - return IRQ_HANDLED; } diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index 6818c10c0c46..a415d9b1c715 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -631,7 +631,7 @@ void __init register_led_regions(void) ** avoid a race condition while writing the CMD/DATA register pair. ** */ -int lcd_print( char *str ) +int lcd_print( const char *str ) { int i; diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c index 9228e210c3bb..6dedbdef7106 100644 --- a/drivers/parisc/power.c +++ b/drivers/parisc/power.c @@ -2,7 +2,7 @@ * linux/drivers/parisc/power.c * HP PARISC soft power switch support driver * - * Copyright (c) 2001-2005 Helge Deller + * Copyright (c) 2001-2007 Helge Deller * All rights reserved. * * @@ -29,7 +29,6 @@ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * * - * * HINT: * Support of the soft power switch button may be enabled or disabled at * runtime through the "/proc/sys/kernel/power" procfs entry. @@ -38,34 +37,28 @@ #include #include #include -#include #include #include #include -#include -#include +#include #include #include #include -#include +#define DRIVER_NAME "powersw" +#define KTHREAD_NAME "kpowerswd" -#ifdef DEBUG -# define DPRINTK(x...) printk(x) -#else -# define DPRINTK(x...) -#endif - - -/* filename in /proc which can be used to enable/disable the power switch */ -#define SYSCTL_FILENAME "sys/kernel/power" +/* how often should the power button be polled ? */ +#define POWERSWITCH_POLL_PER_SEC 2 +/* how long does the power button needs to be down until we react ? */ +#define POWERSWITCH_DOWN_SEC 2 +/* assembly code to access special registers */ +/* taken from PCXL ERS page 82 */ #define DIAG_CODE(code) (0x14000000 + ((code)<<5)) -/* this will go to processor.h or any other place... */ -/* taken from PCXL ERS page 82 */ #define MFCPU_X(rDiagReg, t_ch, t_th, code) \ (DIAG_CODE(code) + ((rDiagReg)<<21) + ((t_ch)<<16) + ((t_th)<<0) ) @@ -76,111 +69,95 @@ #define __getDIAG(dr) ( { \ register unsigned long __res asm("r28");\ __asm__ __volatile__ ( \ - ".word %1\n nop\n" : "=&r" (__res) : "i" (MFCPU_T(dr,28)) \ + ".word %1" : "=&r" (__res) : "i" (MFCPU_T(dr,28) ) \ ); \ __res; \ } ) - -static void deferred_poweroff(struct work_struct *unused) -{ - if (kill_cad_pid(SIGINT, 1)) { - /* just in case killing init process failed */ - machine_power_off(); - } -} - -/* - * This function gets called from interrupt context. - * As it's called within an interrupt, it wouldn't sync if we don't - * use schedule_work(). - */ - -static DECLARE_WORK(poweroff_work, deferred_poweroff); - -static void poweroff(void) -{ - static int powering_off __read_mostly; - - if (powering_off) - return; - - powering_off++; - schedule_work(&poweroff_work); -} - - -/* local time-counter for shutdown */ +/* local shutdown counter */ static int shutdown_timer __read_mostly; /* check, give feedback and start shutdown after one second */ static void process_shutdown(void) { if (shutdown_timer == 0) - DPRINTK(KERN_INFO "Shutdown requested...\n"); + printk(KERN_ALERT KTHREAD_NAME ": Shutdown requested...\n"); shutdown_timer++; /* wait until the button was pressed for 1 second */ - if (shutdown_timer == HZ) { -#if defined (DEBUG) || defined(CONFIG_CHASSIS_LCD_LED) - static char msg[] = "Shutting down..."; -#endif - DPRINTK(KERN_INFO "%s\n", msg); + if (shutdown_timer == (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC)) { + static const char msg[] = "Shutting down..."; + printk(KERN_INFO KTHREAD_NAME ": %s\n", msg); lcd_print(msg); - poweroff(); + + /* send kill signal */ + if (kill_cad_pid(SIGINT, 1)) { + /* just in case killing init process failed */ + if (pm_power_off) + pm_power_off(); + } } } -/* main power switch tasklet struct (scheduled from time.c) */ -DECLARE_TASKLET_DISABLED(power_tasklet, NULL, 0); +/* main power switch task struct */ +static struct task_struct *power_task; + +/* filename in /proc which can be used to enable/disable the power switch */ +#define SYSCTL_FILENAME "sys/kernel/power" /* soft power switch enabled/disabled */ int pwrsw_enabled __read_mostly = 1; -/* - * On gecko style machines (e.g. 712/xx and 715/xx) - * the power switch status is stored in Bit 0 ("the highest bit") - * of CPU diagnose register 25. - * - */ -static void gecko_tasklet_func(unsigned long unused) +/* main kernel thread worker. It polls the button state */ +static int kpowerswd(void *param) { - if (unlikely(!pwrsw_enabled)) - return; - - if (__getDIAG(25) & 0x80000000) { - /* power switch button not pressed or released again */ - /* Warning: Some machines do never reset this DIAG flag! */ - shutdown_timer = 0; - } else { - process_shutdown(); - } -} - + __set_current_state(TASK_RUNNING); + + do { + int button_not_pressed; + unsigned long soft_power_reg = (unsigned long) param; + + schedule_timeout_interruptible(pwrsw_enabled ? HZ : HZ/POWERSWITCH_POLL_PER_SEC); + __set_current_state(TASK_RUNNING); + + if (unlikely(!pwrsw_enabled)) + continue; + + if (soft_power_reg) { + /* + * Non-Gecko-style machines: + * Check the power switch status which is read from the + * real I/O location at soft_power_reg. + * Bit 31 ("the lowest bit) is the status of the power switch. + * This bit is "1" if the button is NOT pressed. + */ + button_not_pressed = (gsc_readl(soft_power_reg) & 0x1); + } else { + /* + * On gecko style machines (e.g. 712/xx and 715/xx) + * the power switch status is stored in Bit 0 ("the highest bit") + * of CPU diagnose register 25. + * Warning: Some machines never reset the DIAG flag, even if + * the button has been released again. + */ + button_not_pressed = (__getDIAG(25) & 0x80000000); + } + + if (likely(button_not_pressed)) { + if (unlikely(shutdown_timer && /* avoid writing if not necessary */ + shutdown_timer < (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC))) { + shutdown_timer = 0; + printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n"); + } + } else + process_shutdown(); + + + } while (!kthread_should_stop()); - -/* - * Check the power switch status which is read from the - * real I/O location at soft_power_reg. - * Bit 31 ("the lowest bit) is the status of the power switch. - */ - -static void polling_tasklet_func(unsigned long soft_power_reg) -{ - unsigned long current_status; - - if (unlikely(!pwrsw_enabled)) - return; - - current_status = gsc_readl(soft_power_reg); - if (current_status & 0x1) { - /* power switch button not pressed */ - shutdown_timer = 0; - } else { - process_shutdown(); - } + return 0; } @@ -220,7 +197,7 @@ static struct notifier_block parisc_panic_block = { static int __init power_init(void) { unsigned long ret; - unsigned long soft_power_reg = 0; + unsigned long soft_power_reg; #if 0 request_irq( IRQ_FROM_REGION(CPU_IRQ_REGION)+2, &powerfail_interrupt, @@ -235,44 +212,44 @@ static int __init power_init(void) soft_power_reg = -1UL; switch (soft_power_reg) { - case 0: printk(KERN_INFO "Gecko-style soft power switch enabled.\n"); - power_tasklet.func = gecko_tasklet_func; + case 0: printk(KERN_INFO DRIVER_NAME ": Gecko-style soft power switch enabled.\n"); break; - case -1UL: printk(KERN_INFO "Soft power switch support not available.\n"); + case -1UL: printk(KERN_INFO DRIVER_NAME ": Soft power switch support not available.\n"); return -ENODEV; - default: printk(KERN_INFO "Soft power switch enabled, polling @ 0x%08lx.\n", + default: printk(KERN_INFO DRIVER_NAME ": Soft power switch at 0x%08lx enabled.\n", soft_power_reg); - power_tasklet.data = soft_power_reg; - power_tasklet.func = polling_tasklet_func; + } + + power_task = kthread_run(kpowerswd, (void*)soft_power_reg, KTHREAD_NAME); + if (IS_ERR(power_task)) { + printk(KERN_ERR DRIVER_NAME ": thread creation failed. Driver not loaded.\n"); + pdc_soft_power_button(0); + return -EIO; } /* Register a call for panic conditions. */ atomic_notifier_chain_register(&panic_notifier_list, &parisc_panic_block); - tasklet_enable(&power_tasklet); - return 0; } static void __exit power_exit(void) { - if (!power_tasklet.func) - return; + kthread_stop(power_task); - tasklet_disable(&power_tasklet); atomic_notifier_chain_unregister(&panic_notifier_list, &parisc_panic_block); - power_tasklet.func = NULL; + pdc_soft_power_button(0); } -module_init(power_init); +arch_initcall(power_init); module_exit(power_exit); -MODULE_AUTHOR("Helge Deller"); +MODULE_AUTHOR("Helge Deller "); MODULE_DESCRIPTION("Soft power switch driver"); MODULE_LICENSE("Dual BSD/GPL"); diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h index efadfd543ec6..c3405ab9d60a 100644 --- a/include/asm-parisc/led.h +++ b/include/asm-parisc/led.h @@ -31,7 +31,7 @@ void __init register_led_regions(void); #ifdef CONFIG_CHASSIS_LCD_LED /* writes a string to the LCD display (if possible on this h/w) */ -int lcd_print(char *str); +int lcd_print(const char *str); #else #define lcd_print(str) #endif -- GitLab