From 5eb32bd059379530fc3809a7fcf183feca75f601 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 24 May 2010 00:36:13 -0700 Subject: [PATCH] fec: add support for PHY interface platform data The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the ability to configure RMII, based on platform data. Signed-off-by: Baruch Siach Acked-by: Greg Ungerer Signed-off-by: David S. Miller --- drivers/net/fec.c | 22 ++++++++++++++++++++++ drivers/net/fec.h | 2 ++ include/linux/fec.h | 21 +++++++++++++++++++++ 3 files changed, 45 insertions(+) create mode 100644 include/linux/fec.h diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 42d9ac9ba395..326465ffbb23 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -182,6 +183,7 @@ struct fec_enet_private { struct phy_device *phy_dev; int mii_timeout; uint phy_speed; + phy_interface_t phy_interface; int index; int link; int full_duplex; @@ -1191,6 +1193,21 @@ fec_restart(struct net_device *dev, int duplex) /* Set MII speed */ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); +#ifdef FEC_MIIGSK_ENR + if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { + /* disable the gasket and wait */ + writel(0, fep->hwp + FEC_MIIGSK_ENR); + while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) + udelay(1); + + /* configure the gasket: RMII, 50 MHz, no loopback, no echo */ + writel(1, fep->hwp + FEC_MIIGSK_CFGR); + + /* re-enable the gasket */ + writel(2, fep->hwp + FEC_MIIGSK_ENR); + } +#endif + /* And last, enable the transmit and receive processing */ writel(2, fep->hwp + FEC_ECNTRL); writel(0, fep->hwp + FEC_R_DES_ACTIVE); @@ -1226,6 +1243,7 @@ static int __devinit fec_probe(struct platform_device *pdev) { struct fec_enet_private *fep; + struct fec_platform_data *pdata; struct net_device *ndev; int i, irq, ret = 0; struct resource *r; @@ -1259,6 +1277,10 @@ fec_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ndev); + pdata = pdev->dev.platform_data; + if (pdata) + fep->phy_interface = pdata->phy; + /* This device has up to three irqs on some platforms */ for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); diff --git a/drivers/net/fec.h b/drivers/net/fec.h index cc47f3f057c7..2c48b25668d5 100644 --- a/drivers/net/fec.h +++ b/drivers/net/fec.h @@ -43,6 +43,8 @@ #define FEC_R_DES_START 0x180 /* Receive descriptor ring */ #define FEC_X_DES_START 0x184 /* Transmit descriptor ring */ #define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */ +#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ +#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ #else diff --git a/include/linux/fec.h b/include/linux/fec.h new file mode 100644 index 000000000000..5d3523d8dd0c --- /dev/null +++ b/include/linux/fec.h @@ -0,0 +1,21 @@ +/* include/linux/fec.h + * + * Copyright (c) 2009 Orex Computed Radiography + * Baruch Siach + * + * Header file for the FEC platform data + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_FEC_H__ +#define __LINUX_FEC_H__ + +#include + +struct fec_platform_data { + phy_interface_t phy; +}; + +#endif -- GitLab