Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 5b3b1688 编写于 作者: D David Daney 提交者： Ralf Baechle
浏览文件
操作

MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon. 

These are the rest of the new files needed to add OCTEON processor
support to the Linux kernel.  Other than Makefile and Kconfig which
should be obvious, we have:

csrc-octeon.c   -- Clock source driver for OCTEON.
dma-octeon.c    -- Helper functions for mapping DMA memory.
flash_setup.c   -- Register on-board flash with the MTD subsystem.
octeon-irq.c    -- OCTEON interrupt controller managment.
octeon-memcpy.S -- Optimized memcpy() implementation.
serial.c        -- Register 8250 platform driver and early console.
setup.c         -- Early architecture initialization.
smp.c           -- OCTEON SMP support.
octeon_switch.S -- Scheduler context switch for OCTEON.
c-octeon.c      -- OCTEON cache controller support.
cex-oct.S       -- OCTEON cache exception handler.

asm/mach-cavium-octeon/*.h -- Architecture include files.
Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S
上级 58f07778
隐藏空白更改
内联 并排
Showing with 4243 addition and 0 deletion
arch/mips/cavium-octeon/Kconfig 0 → 100644
浏览文件 @ 5b3b1688
config CAVIUM_OCTEON_SPECIFIC_OPTIONS
bool "Enable Octeon specific options"
depends on CPU_CAVIUM_OCTEON
default "y"
config CAVIUM_OCTEON_2ND_KERNEL
bool "Build the kernel to be used as a 2nd kernel on the same chip"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
This option configures this kernel to be linked at a different
address and use the 2nd uart for output. This allows a kernel built
with this option to be run at the same time as one built without this
option.
config CAVIUM_OCTEON_HW_FIX_UNALIGNED
bool "Enable hardware fixups of unaligned loads and stores"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Configure the Octeon hardware to automatically fix unaligned loads
and stores. Normally unaligned accesses are fixed using a kernel
exception handler. This option enables the hardware automatic fixups,
which requires only an extra 3 cycles. Disable this option if you
are running code that relies on address exceptions on unaligned
accesses.
config CAVIUM_OCTEON_CVMSEG_SIZE
int "Number of L1 cache lines reserved for CVMSEG memory"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
range 0 54
default 1
help
CVMSEG LM is a segment that accesses portions of the dcache as a
local memory; the larger CVMSEG is, the smaller the cache is.
This selects the size of CVMSEG LM, which is in cache blocks. The
legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
between zero and 6192 bytes).
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Enable locking parts of the kernel into the L2 cache.
config CAVIUM_OCTEON_LOCK_L2_TLB
bool "Lock the TLB handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level TLB fast path into L2.
config CAVIUM_OCTEON_LOCK_L2_EXCEPTION
bool "Lock the exception handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level exception handler into L2.
config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
bool "Lock the interrupt handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level interrupt handler into L2.
config CAVIUM_OCTEON_LOCK_L2_INTERRUPT
bool "Lock the 2nd level interrupt handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the 2nd level interrupt handler in L2.
config CAVIUM_OCTEON_LOCK_L2_MEMCPY
bool "Lock memcpy() in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the kernel's implementation of memcpy() into L2.
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
arch/mips/cavium-octeon/Makefile 0 → 100644
浏览文件 @ 5b3b1688
#
# Makefile for the Cavium Octeon specific kernel interface routines
# under Linux.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2005-2008 Cavium Networks
#
obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
obj-y += dma-octeon.o flash_setup.o
obj-y += octeon-memcpy.o
obj-$(CONFIG_SMP) += smp.o
arch/mips/cavium-octeon/csrc-octeon.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 by Ralf Baechle
*/
#include <linux/clocksource.h>
#include <linux/init.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-ipd-defs.h>
/*
* Set the current core's cvmcount counter to the value of the
* IPD_CLK_COUNT. We do this on all cores as they are brought
* on-line. This allows for a read from a local cpu register to
* access a synchronized counter.
*
*/
void octeon_init_cvmcount(void)
{
unsigned long flags;
unsigned loops = 2;
/* Clobber loops so GCC will not unroll the following while loop. */
asm("" : "+r" (loops));
local_irq_save(flags);
/*
* Loop several times so we are executing from the cache,
* which should give more deterministic timing.
*/
while (loops--)
write_c0_cvmcount(cvmx_read_csr(CVMX_IPD_CLK_COUNT));
local_irq_restore(flags);
}
static cycle_t octeon_cvmcount_read(void)
{
return read_c0_cvmcount();
}
static struct clocksource clocksource_mips = {
.name = "OCTEON_CVMCOUNT",
.read = octeon_cvmcount_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
}
arch/mips/cavium-octeon/dma-octeon.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
* Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org>
* Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
* swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
* IP32 changes by Ilya.
* Cavium Networks: Create new dma setup for Cavium Networks Octeon based on
* the kernels original.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <dma-coherence.h>
dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
{
/* Without PCI/PCIe this function can be called for Octeon internal
devices such as USB. These devices all support 64bit addressing */
mb();
return virt_to_phys(ptr);
}
void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
{
/* Without PCI/PCIe this function can be called for Octeon internal
* devices such as USB. These devices all support 64bit addressing */
return;
}
arch/mips/cavium-octeon/flash_setup.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* Octeon Bootbus flash setup
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007, 2008 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/octeon/octeon.h>
static struct map_info flash_map;
static struct mtd_info *mymtd;
#ifdef CONFIG_MTD_PARTITIONS
static int nr_parts;
static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
"RedBoot",
#endif
NULL
};
#endif
/**
* Module/ driver initialization.
*
* Returns Zero on success
*/
static int __init flash_init(void)
{
/*
* Read the bootbus region 0 setup to determine the base
* address of the flash.
*/
union cvmx_mio_boot_reg_cfgx region_cfg;
region_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(0));
if (region_cfg.s.en) {
/*
* The bootloader always takes the flash and sets its
* address so the entire flash fits below
* 0x1fc00000. This way the flash aliases to
* 0x1fc00000 for booting. Software can access the
* full flash at the true address, while core boot can
* access 4MB.
*/
/* Use this name so old part lines work */
flash_map.name = "phys_mapped_flash";
flash_map.phys = region_cfg.s.base << 16;
flash_map.size = 0x1fc00000 - flash_map.phys;
flash_map.bankwidth = 1;
flash_map.virt = ioremap(flash_map.phys, flash_map.size);
pr_notice("Bootbus flash: Setting flash for %luMB flash at "
"0x%08lx\n", flash_map.size >> 20, flash_map.phys);
simple_map_init(&flash_map);
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
nr_parts = parse_mtd_partitions(mymtd,
part_probe_types,
&parts, 0);
if (nr_parts > 0)
add_mtd_partitions(mymtd, parts, nr_parts);
else
add_mtd_device(mymtd);
#else
add_mtd_device(mymtd);
#endif
} else {
pr_err("Failed to register MTD device for flash\n");
}
}
return 0;
}
late_initcall(flash_init);
arch/mips/cavium-octeon/octeon-irq.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2008 Cavium Networks
*/
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/hardirq.h>
#include <asm/octeon/octeon.h>
DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
DEFINE_SPINLOCK(octeon_irq_msi_lock);
static void octeon_irq_core_ack(unsigned int irq)
{
unsigned int bit = irq - OCTEON_IRQ_SW0;
/*
* We don't need to disable IRQs to make these atomic since
* they are already disabled earlier in the low level
* interrupt code.
*/
clear_c0_status(0x100 << bit);
/* The two user interrupts must be cleared manually. */
if (bit < 2)
clear_c0_cause(0x100 << bit);
}
static void octeon_irq_core_eoi(unsigned int irq)
{
irq_desc_t *desc = irq_desc + irq;
unsigned int bit = irq - OCTEON_IRQ_SW0;
/*
* If an IRQ is being processed while we are disabling it the
* handler will attempt to unmask the interrupt after it has
* been disabled.
*/
if (desc->status & IRQ_DISABLED)
return;
/* There is a race here. We should fix it. */
/*
* We don't need to disable IRQs to make these atomic since
* they are already disabled earlier in the low level
* interrupt code.
*/
set_c0_status(0x100 << bit);
}
static void octeon_irq_core_enable(unsigned int irq)
{
unsigned long flags;
unsigned int bit = irq - OCTEON_IRQ_SW0;
/*
* We need to disable interrupts to make sure our updates are
* atomic.
*/
local_irq_save(flags);
set_c0_status(0x100 << bit);
local_irq_restore(flags);
}
static void octeon_irq_core_disable_local(unsigned int irq)
{
unsigned long flags;
unsigned int bit = irq - OCTEON_IRQ_SW0;
/*
* We need to disable interrupts to make sure our updates are
* atomic.
*/
local_irq_save(flags);
clear_c0_status(0x100 << bit);
local_irq_restore(flags);
}
static void octeon_irq_core_disable(unsigned int irq)
{
#ifdef CONFIG_SMP
on_each_cpu((void (*)(void *)) octeon_irq_core_disable_local,
(void *) (long) irq, 1);
#else
octeon_irq_core_disable_local(irq);
#endif
}
static struct irq_chip octeon_irq_chip_core = {
.name = "Core",
.enable = octeon_irq_core_enable,
.disable = octeon_irq_core_disable,
.ack = octeon_irq_core_ack,
.eoi = octeon_irq_core_eoi,
};
static void octeon_irq_ciu0_ack(unsigned int irq)
{
/*
* In order to avoid any locking accessing the CIU, we
* acknowledge CIU interrupts by disabling all of them. This
* way we can use a per core register and avoid any out of
* core locking requirements. This has the side affect that
* CIU interrupts can't be processed recursively.
*
* We don't need to disable IRQs to make these atomic since
* they are already disabled earlier in the low level
* interrupt code.
*/
clear_c0_status(0x100 << 2);
}
static void octeon_irq_ciu0_eoi(unsigned int irq)
{
/*
* Enable all CIU interrupts again. We don't need to disable
* IRQs to make these atomic since they are already disabled
* earlier in the low level interrupt code.
*/
set_c0_status(0x100 << 2);
}
static void octeon_irq_ciu0_enable(unsigned int irq)
{
int coreid = cvmx_get_core_num();
unsigned long flags;
uint64_t en0;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
/*
* A read lock is used here to make sure only one core is ever
* updating the CIU enable bits at a time. During an enable
* the cores don't interfere with each other. During a disable
* the write lock stops any enables that might cause a
* problem.
*/
read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
en0 |= 1ull << bit;
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
}
static void octeon_irq_ciu0_disable(unsigned int irq)
{
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
unsigned long flags;
uint64_t en0;
#ifdef CONFIG_SMP
int cpu;
write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
for_each_online_cpu(cpu) {
int coreid = cpu_logical_map(cpu);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
en0 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
}
/*
* We need to do a read after the last update to make sure all
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
#else
int coreid = cvmx_get_core_num();
local_irq_save(flags);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
en0 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
local_irq_restore(flags);
#endif
}
#ifdef CONFIG_SMP
static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
write_lock(&octeon_irq_ciu0_rwlock);
for_each_online_cpu(cpu) {
int coreid = cpu_logical_map(cpu);
uint64_t en0 =
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
if (cpumask_test_cpu(cpu, dest))
en0 |= 1ull << bit;
else
en0 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
}
/*
* We need to do a read after the last update to make sure all
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
write_unlock(&octeon_irq_ciu0_rwlock);
}
#endif
static struct irq_chip octeon_irq_chip_ciu0 = {
.name = "CIU0",
.enable = octeon_irq_ciu0_enable,
.disable = octeon_irq_ciu0_disable,
.ack = octeon_irq_ciu0_ack,
.eoi = octeon_irq_ciu0_eoi,
#ifdef CONFIG_SMP
.set_affinity = octeon_irq_ciu0_set_affinity,
#endif
};
static void octeon_irq_ciu1_ack(unsigned int irq)
{
/*
* In order to avoid any locking accessing the CIU, we
* acknowledge CIU interrupts by disabling all of them. This
* way we can use a per core register and avoid any out of
* core locking requirements. This has the side affect that
* CIU interrupts can't be processed recursively. We don't
* need to disable IRQs to make these atomic since they are
* already disabled earlier in the low level interrupt code.
*/
clear_c0_status(0x100 << 3);
}
static void octeon_irq_ciu1_eoi(unsigned int irq)
{
/*
* Enable all CIU interrupts again. We don't need to disable
* IRQs to make these atomic since they are already disabled
* earlier in the low level interrupt code.
*/
set_c0_status(0x100 << 3);
}
static void octeon_irq_ciu1_enable(unsigned int irq)
{
int coreid = cvmx_get_core_num();
unsigned long flags;
uint64_t en1;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
/*
* A read lock is used here to make sure only one core is ever
* updating the CIU enable bits at a time. During an enable
* the cores don't interfere with each other. During a disable
* the write lock stops any enables that might cause a
* problem.
*/
read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
en1 |= 1ull << bit;
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
}
static void octeon_irq_ciu1_disable(unsigned int irq)
{
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
unsigned long flags;
uint64_t en1;
#ifdef CONFIG_SMP
int cpu;
write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
for_each_online_cpu(cpu) {
int coreid = cpu_logical_map(cpu);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
en1 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
}
/*
* We need to do a read after the last update to make sure all
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
#else
int coreid = cvmx_get_core_num();
local_irq_save(flags);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
en1 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
local_irq_restore(flags);
#endif
}
#ifdef CONFIG_SMP
static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
write_lock(&octeon_irq_ciu1_rwlock);
for_each_online_cpu(cpu) {
int coreid = cpu_logical_map(cpu);
uint64_t en1 =
cvmx_read_csr(CVMX_CIU_INTX_EN1
(coreid * 2 + 1));
if (cpumask_test_cpu(cpu, dest))
en1 |= 1ull << bit;
else
en1 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
}
/*
* We need to do a read after the last update to make sure all
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
write_unlock(&octeon_irq_ciu1_rwlock);
}
#endif
static struct irq_chip octeon_irq_chip_ciu1 = {
.name = "CIU1",
.enable = octeon_irq_ciu1_enable,
.disable = octeon_irq_ciu1_disable,
.ack = octeon_irq_ciu1_ack,
.eoi = octeon_irq_ciu1_eoi,
#ifdef CONFIG_SMP
.set_affinity = octeon_irq_ciu1_set_affinity,
#endif
};
#ifdef CONFIG_PCI_MSI
static void octeon_irq_msi_ack(unsigned int irq)
{
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
/* These chips have PCI */
cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
1ull << (irq - OCTEON_IRQ_MSI_BIT0));
} else {
/*
* These chips have PCIe. Thankfully the ACK doesn't
* need any locking.
*/
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
1ull << (irq - OCTEON_IRQ_MSI_BIT0));
}
}
static void octeon_irq_msi_eoi(unsigned int irq)
{
/* Nothing needed */
}
static void octeon_irq_msi_enable(unsigned int irq)
{
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
/*
* Octeon PCI doesn't have the ability to mask/unmask
* MSI interrupts individually. Instead of
* masking/unmasking them in groups of 16, we simple
* assume MSI devices are well behaved. MSI
* interrupts are always enable and the ACK is assumed
* to be enough.
*/
} else {
/* These chips have PCIe. Note that we only support
* the first 64 MSI interrupts. Unfortunately all the
* MSI enables are in the same register. We use
* MSI0's lock to control access to them all.
*/
uint64_t en;
unsigned long flags;
spin_lock_irqsave(&octeon_irq_msi_lock, flags);
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}
}
static void octeon_irq_msi_disable(unsigned int irq)
{
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
/* See comment in enable */
} else {
/*
* These chips have PCIe. Note that we only support
* the first 64 MSI interrupts. Unfortunately all the
* MSI enables are in the same register. We use
* MSI0's lock to control access to them all.
*/
uint64_t en;
unsigned long flags;
spin_lock_irqsave(&octeon_irq_msi_lock, flags);
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}
}
static struct irq_chip octeon_irq_chip_msi = {
.name = "MSI",
.enable = octeon_irq_msi_enable,
.disable = octeon_irq_msi_disable,
.ack = octeon_irq_msi_ack,
.eoi = octeon_irq_msi_eoi,
};
#endif
void __init arch_init_irq(void)
{
int irq;
#ifdef CONFIG_SMP
/* Set the default affinity to the boot cpu. */
cpumask_clear(irq_default_affinity);
cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
#endif
if (NR_IRQS < OCTEON_IRQ_LAST)
pr_err("octeon_irq_init: NR_IRQS is set too low\n");
/* 0 - 15 reserved for i8259 master and slave controller. */
/* 17 - 23 Mips internal */
for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++) {
set_irq_chip_and_handler(irq, &octeon_irq_chip_core,
handle_percpu_irq);
}
/* 24 - 87 CIU_INT_SUM0 */
for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0,
handle_percpu_irq);
}
/* 88 - 151 CIU_INT_SUM1 */
for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) {
set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1,
handle_percpu_irq);
}
#ifdef CONFIG_PCI_MSI
/* 152 - 215 PCI/PCIe MSI interrupts */
for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_BIT63; irq++) {
set_irq_chip_and_handler(irq, &octeon_irq_chip_msi,
handle_percpu_irq);
}
#endif
set_c0_status(0x300 << 2);
}
asmlinkage void plat_irq_dispatch(void)
{
const unsigned long core_id = cvmx_get_core_num();
const uint64_t ciu_sum0_address = CVMX_CIU_INTX_SUM0(core_id * 2);
const uint64_t ciu_en0_address = CVMX_CIU_INTX_EN0(core_id * 2);
const uint64_t ciu_sum1_address = CVMX_CIU_INT_SUM1;
const uint64_t ciu_en1_address = CVMX_CIU_INTX_EN1(core_id * 2 + 1);
unsigned long cop0_cause;
unsigned long cop0_status;
uint64_t ciu_en;
uint64_t ciu_sum;
while (1) {
cop0_cause = read_c0_cause();
cop0_status = read_c0_status();
cop0_cause &= cop0_status;
cop0_cause &= ST0_IM;
if (unlikely(cop0_cause & STATUSF_IP2)) {
ciu_sum = cvmx_read_csr(ciu_sum0_address);
ciu_en = cvmx_read_csr(ciu_en0_address);
ciu_sum &= ciu_en;
if (likely(ciu_sum))
do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WORKQ0 - 1);
else
spurious_interrupt();
} else if (unlikely(cop0_cause & STATUSF_IP3)) {
ciu_sum = cvmx_read_csr(ciu_sum1_address);
ciu_en = cvmx_read_csr(ciu_en1_address);
ciu_sum &= ciu_en;
if (likely(ciu_sum))
do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WDOG0 - 1);
else
spurious_interrupt();
} else if (likely(cop0_cause)) {
do_IRQ(fls(cop0_cause) - 9 + MIPS_CPU_IRQ_BASE);
} else {
break;
}
}
}
arch/mips/cavium-octeon/octeon-memcpy.S 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Unified implementation of memcpy, memmove and the __copy_user backend.
*
* Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
* Copyright (C) 2002 Broadcom, Inc.
* memcpy/copy_user author: Mark Vandevoorde
*
* Mnemonic names for arguments to memcpy/__copy_user
*/
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#define dst a0
#define src a1
#define len a2
/*
* Spec
*
* memcpy copies len bytes from src to dst and sets v0 to dst.
* It assumes that
* - src and dst don't overlap
* - src is readable
* - dst is writable
* memcpy uses the standard calling convention
*
* __copy_user copies up to len bytes from src to dst and sets a2 (len) to
* the number of uncopied bytes due to an exception caused by a read or write.
* __copy_user assumes that src and dst don't overlap, and that the call is
* implementing one of the following:
* copy_to_user
* - src is readable (no exceptions when reading src)
* copy_from_user
* - dst is writable (no exceptions when writing dst)
* __copy_user uses a non-standard calling convention; see
* arch/mips/include/asm/uaccess.h
*
* When an exception happens on a load, the handler must
# ensure that all of the destination buffer is overwritten to prevent
* leaking information to user mode programs.
*/
/*
* Implementation
*/
/*
* The exception handler for loads requires that:
* 1- AT contain the address of the byte just past the end of the source
* of the copy,
* 2- src_entry <= src < AT, and
* 3- (dst - src) == (dst_entry - src_entry),
* The _entry suffix denotes values when __copy_user was called.
*
* (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
* (2) is met by incrementing src by the number of bytes copied
* (3) is met by not doing loads between a pair of increments of dst and src
*
* The exception handlers for stores adjust len (if necessary) and return.
* These handlers do not need to overwrite any data.
*
* For __rmemcpy and memmove an exception is always a kernel bug, therefore
* they're not protected.
*/
#define EXC(inst_reg,addr,handler) \
9: inst_reg, addr; \
.section __ex_table,"a"; \
PTR 9b, handler; \
.previous
/*
* Only on the 64-bit kernel we can made use of 64-bit registers.
*/
#ifdef CONFIG_64BIT
#define USE_DOUBLE
#endif
#ifdef USE_DOUBLE
#define LOAD ld
#define LOADL ldl
#define LOADR ldr
#define STOREL sdl
#define STORER sdr
#define STORE sd
#define ADD daddu
#define SUB dsubu
#define SRL dsrl
#define SRA dsra
#define SLL dsll
#define SLLV dsllv
#define SRLV dsrlv
#define NBYTES 8
#define LOG_NBYTES 3
/*
* As we are sharing code base with the mips32 tree (which use the o32 ABI
* register definitions). We need to redefine the register definitions from
* the n64 ABI register naming to the o32 ABI register naming.
*/
#undef t0
#undef t1
#undef t2
#undef t3
#define t0 $8
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#else
#define LOAD lw
#define LOADL lwl
#define LOADR lwr
#define STOREL swl
#define STORER swr
#define STORE sw
#define ADD addu
#define SUB subu
#define SRL srl
#define SLL sll
#define SRA sra
#define SLLV sllv
#define SRLV srlv
#define NBYTES 4
#define LOG_NBYTES 2
#endif /* USE_DOUBLE */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define LDFIRST LOADR
#define LDREST LOADL
#define STFIRST STORER
#define STREST STOREL
#define SHIFT_DISCARD SLLV
#else
#define LDFIRST LOADL
#define LDREST LOADR
#define STFIRST STOREL
#define STREST STORER
#define SHIFT_DISCARD SRLV
#endif
#define FIRST(unit) ((unit)*NBYTES)
#define REST(unit) (FIRST(unit)+NBYTES-1)
#define UNIT(unit) FIRST(unit)
#define ADDRMASK (NBYTES-1)
.text
.set noreorder
.set noat
/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
* the number of uncopied bytes.
* memcpy sets v0 to dst.
*/
.align 5
LEAF(memcpy) /* a0=dst a1=src a2=len */
move v0, dst /* return value */
__memcpy:
FEXPORT(__copy_user)
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
*/
#
# Octeon doesn't care if the destination is unaligned. The hardware
# can fix it faster than we can special case the assembly.
#
pref 0, 0(src)
sltu t0, len, NBYTES # Check if < 1 word
bnez t0, copy_bytes_checklen
and t0, src, ADDRMASK # Check if src unaligned
bnez t0, src_unaligned
sltu t0, len, 4*NBYTES # Check if < 4 words
bnez t0, less_than_4units
sltu t0, len, 8*NBYTES # Check if < 8 words
bnez t0, less_than_8units
sltu t0, len, 16*NBYTES # Check if < 16 words
bnez t0, cleanup_both_aligned
sltu t0, len, 128+1 # Check if len < 129
bnez t0, 1f # Skip prefetch if len is too short
sltu t0, len, 256+1 # Check if len < 257
bnez t0, 1f # Skip prefetch if len is too short
pref 0, 128(src) # We must not prefetch invalid addresses
#
# This is where we loop if there is more than 128 bytes left
2: pref 0, 256(src) # We must not prefetch invalid addresses
#
# This is where we loop if we can't prefetch anymore
1:
EXC( LOAD t0, UNIT(0)(src), l_exc)
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
SUB len, len, 16*NBYTES
EXC( STORE t0, UNIT(0)(dst), s_exc_p16u)
EXC( STORE t1, UNIT(1)(dst), s_exc_p15u)
EXC( STORE t2, UNIT(2)(dst), s_exc_p14u)
EXC( STORE t3, UNIT(3)(dst), s_exc_p13u)
EXC( LOAD t0, UNIT(4)(src), l_exc_copy)
EXC( LOAD t1, UNIT(5)(src), l_exc_copy)
EXC( LOAD t2, UNIT(6)(src), l_exc_copy)
EXC( LOAD t3, UNIT(7)(src), l_exc_copy)
EXC( STORE t0, UNIT(4)(dst), s_exc_p12u)
EXC( STORE t1, UNIT(5)(dst), s_exc_p11u)
EXC( STORE t2, UNIT(6)(dst), s_exc_p10u)
ADD src, src, 16*NBYTES
EXC( STORE t3, UNIT(7)(dst), s_exc_p9u)
ADD dst, dst, 16*NBYTES
EXC( LOAD t0, UNIT(-8)(src), l_exc_copy)
EXC( LOAD t1, UNIT(-7)(src), l_exc_copy)
EXC( LOAD t2, UNIT(-6)(src), l_exc_copy)
EXC( LOAD t3, UNIT(-5)(src), l_exc_copy)
EXC( STORE t0, UNIT(-8)(dst), s_exc_p8u)
EXC( STORE t1, UNIT(-7)(dst), s_exc_p7u)
EXC( STORE t2, UNIT(-6)(dst), s_exc_p6u)
EXC( STORE t3, UNIT(-5)(dst), s_exc_p5u)
EXC( LOAD t0, UNIT(-4)(src), l_exc_copy)
EXC( LOAD t1, UNIT(-3)(src), l_exc_copy)
EXC( LOAD t2, UNIT(-2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(-1)(src), l_exc_copy)
EXC( STORE t0, UNIT(-4)(dst), s_exc_p4u)
EXC( STORE t1, UNIT(-3)(dst), s_exc_p3u)
EXC( STORE t2, UNIT(-2)(dst), s_exc_p2u)
EXC( STORE t3, UNIT(-1)(dst), s_exc_p1u)
sltu t0, len, 256+1 # See if we can prefetch more
beqz t0, 2b
sltu t0, len, 128 # See if we can loop more time
beqz t0, 1b
nop
#
# Jump here if there are less than 16*NBYTES left.
#
cleanup_both_aligned:
beqz len, done
sltu t0, len, 8*NBYTES
bnez t0, less_than_8units
nop
EXC( LOAD t0, UNIT(0)(src), l_exc)
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
SUB len, len, 8*NBYTES
EXC( STORE t0, UNIT(0)(dst), s_exc_p8u)
EXC( STORE t1, UNIT(1)(dst), s_exc_p7u)
EXC( STORE t2, UNIT(2)(dst), s_exc_p6u)
EXC( STORE t3, UNIT(3)(dst), s_exc_p5u)
EXC( LOAD t0, UNIT(4)(src), l_exc_copy)
EXC( LOAD t1, UNIT(5)(src), l_exc_copy)
EXC( LOAD t2, UNIT(6)(src), l_exc_copy)
EXC( LOAD t3, UNIT(7)(src), l_exc_copy)
EXC( STORE t0, UNIT(4)(dst), s_exc_p4u)
EXC( STORE t1, UNIT(5)(dst), s_exc_p3u)
EXC( STORE t2, UNIT(6)(dst), s_exc_p2u)
EXC( STORE t3, UNIT(7)(dst), s_exc_p1u)
ADD src, src, 8*NBYTES
beqz len, done
ADD dst, dst, 8*NBYTES
#
# Jump here if there are less than 8*NBYTES left.
#
less_than_8units:
sltu t0, len, 4*NBYTES
bnez t0, less_than_4units
nop
EXC( LOAD t0, UNIT(0)(src), l_exc)
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
SUB len, len, 4*NBYTES
EXC( STORE t0, UNIT(0)(dst), s_exc_p4u)
EXC( STORE t1, UNIT(1)(dst), s_exc_p3u)
EXC( STORE t2, UNIT(2)(dst), s_exc_p2u)
EXC( STORE t3, UNIT(3)(dst), s_exc_p1u)
ADD src, src, 4*NBYTES
beqz len, done
ADD dst, dst, 4*NBYTES
#
# Jump here if there are less than 4*NBYTES left. This means
# we may need to copy up to 3 NBYTES words.
#
less_than_4units:
sltu t0, len, 1*NBYTES
bnez t0, copy_bytes_checklen
nop
#
# 1) Copy NBYTES, then check length again
#
EXC( LOAD t0, 0(src), l_exc)
SUB len, len, NBYTES
sltu t1, len, 8
EXC( STORE t0, 0(dst), s_exc_p1u)
ADD src, src, NBYTES
bnez t1, copy_bytes_checklen
ADD dst, dst, NBYTES
#
# 2) Copy NBYTES, then check length again
#
EXC( LOAD t0, 0(src), l_exc)
SUB len, len, NBYTES
sltu t1, len, 8
EXC( STORE t0, 0(dst), s_exc_p1u)
ADD src, src, NBYTES
bnez t1, copy_bytes_checklen
ADD dst, dst, NBYTES
#
# 3) Copy NBYTES, then check length again
#
EXC( LOAD t0, 0(src), l_exc)
SUB len, len, NBYTES
ADD src, src, NBYTES
ADD dst, dst, NBYTES
b copy_bytes_checklen
EXC( STORE t0, -8(dst), s_exc_p1u)
src_unaligned:
#define rem t8
SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
beqz t0, cleanup_src_unaligned
and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
1:
/*
* Avoid consecutive LD*'s to the same register since some mips
* implementations can't issue them in the same cycle.
* It's OK to load FIRST(N+1) before REST(N) because the two addresses
* are to the same unit (unless src is aligned, but it's not).
*/
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy)
SUB len, len, 4*NBYTES
EXC( LDREST t0, REST(0)(src), l_exc_copy)
EXC( LDREST t1, REST(1)(src), l_exc_copy)
EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy)
EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy)
EXC( LDREST t2, REST(2)(src), l_exc_copy)
EXC( LDREST t3, REST(3)(src), l_exc_copy)
ADD src, src, 4*NBYTES
EXC( STORE t0, UNIT(0)(dst), s_exc_p4u)
EXC( STORE t1, UNIT(1)(dst), s_exc_p3u)
EXC( STORE t2, UNIT(2)(dst), s_exc_p2u)
EXC( STORE t3, UNIT(3)(dst), s_exc_p1u)
bne len, rem, 1b
ADD dst, dst, 4*NBYTES
cleanup_src_unaligned:
beqz len, done
and rem, len, NBYTES-1 # rem = len % NBYTES
beq rem, len, copy_bytes
nop
1:
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
EXC( LDREST t0, REST(0)(src), l_exc_copy)
SUB len, len, NBYTES
EXC( STORE t0, 0(dst), s_exc_p1u)
ADD src, src, NBYTES
bne len, rem, 1b
ADD dst, dst, NBYTES
copy_bytes_checklen:
beqz len, done
nop
copy_bytes:
/* 0 < len < NBYTES */
#define COPY_BYTE(N) \
EXC( lb t0, N(src), l_exc); \
SUB len, len, 1; \
beqz len, done; \
EXC( sb t0, N(dst), s_exc_p1)
COPY_BYTE(0)
COPY_BYTE(1)
#ifdef USE_DOUBLE
COPY_BYTE(2)
COPY_BYTE(3)
COPY_BYTE(4)
COPY_BYTE(5)
#endif
EXC( lb t0, NBYTES-2(src), l_exc)
SUB len, len, 1
jr ra
EXC( sb t0, NBYTES-2(dst), s_exc_p1)
done:
jr ra
nop
END(memcpy)
l_exc_copy:
/*
* Copy bytes from src until faulting load address (or until a
* lb faults)
*
* When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
* may be more than a byte beyond the last address.
* Hence, the lb below may get an exception.
*
* Assumes src < THREAD_BUADDR($28)
*/
LOAD t0, TI_TASK($28)
nop
LOAD t0, THREAD_BUADDR(t0)
1:
EXC( lb t1, 0(src), l_exc)
ADD src, src, 1
sb t1, 0(dst) # can't fault -- we're copy_from_user
bne src, t0, 1b
ADD dst, dst, 1
l_exc:
LOAD t0, TI_TASK($28)
nop
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
nop
SUB len, AT, t0 # len number of uncopied bytes
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
* dst += (fault addr - src) to put dst at first byte to clear
*/
ADD dst, t0 # compute start address in a1
SUB dst, src
/*
* Clear len bytes starting at dst. Can't call __bzero because it
* might modify len. An inefficient loop for these rare times...
*/
beqz len, done
SUB src, len, 1
1: sb zero, 0(dst)
ADD dst, dst, 1
bnez src, 1b
SUB src, src, 1
jr ra
nop
#define SEXC(n) \
s_exc_p ## n ## u: \
jr ra; \
ADD len, len, n*NBYTES
SEXC(16)
SEXC(15)
SEXC(14)
SEXC(13)
SEXC(12)
SEXC(11)
SEXC(10)
SEXC(9)
SEXC(8)
SEXC(7)
SEXC(6)
SEXC(5)
SEXC(4)
SEXC(3)
SEXC(2)
SEXC(1)
s_exc_p1:
jr ra
ADD len, len, 1
s_exc:
jr ra
nop
.align 5
LEAF(memmove)
ADD t0, a0, a2
ADD t1, a1, a2
sltu t0, a1, t0 # dst + len <= src -> memcpy
sltu t1, a0, t1 # dst >= src + len -> memcpy
and t0, t1
beqz t0, __memcpy
move v0, a0 /* return value */
beqz a2, r_out
END(memmove)
/* fall through to __rmemcpy */
LEAF(__rmemcpy) /* a0=dst a1=src a2=len */
sltu t0, a1, a0
beqz t0, r_end_bytes_up # src >= dst
nop
ADD a0, a2 # dst = dst + len
ADD a1, a2 # src = src + len
r_end_bytes:
lb t0, -1(a1)
SUB a2, a2, 0x1
sb t0, -1(a0)
SUB a1, a1, 0x1
bnez a2, r_end_bytes
SUB a0, a0, 0x1
r_out:
jr ra
move a2, zero
r_end_bytes_up:
lb t0, (a1)
SUB a2, a2, 0x1
sb t0, (a0)
ADD a1, a1, 0x1
bnez a2, r_end_bytes_up
ADD a0, a0, 0x1
jr ra
move a2, zero
END(__rmemcpy)
arch/mips/cavium-octeon/serial.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2007 Cavium Networks
*/
#include <linux/console.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/tty.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
#ifdef CONFIG_GDB_CONSOLE
#define DEBUG_UART 0
#else
#define DEBUG_UART 1
#endif
unsigned int octeon_serial_in(struct uart_port *up, int offset)
{
int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
if (offset == UART_IIR && (rv & 0xf) == 7) {
/* Busy interrupt, read the USR (39) and try again. */
cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
}
return rv;
}
void octeon_serial_out(struct uart_port *up, int offset, int value)
{
/*
* If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
* working.
*/
if (offset == UART_LCR)
value &= 0x9f;
cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
}
/*
* Allocated in .bss, so it is all zeroed.
*/
#define OCTEON_MAX_UARTS 3
static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
static struct platform_device octeon_uart8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = octeon_uart8250_data,
},
};
static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
{
p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
p->type = PORT_OCTEON;
p->iotype = UPIO_MEM;
p->regshift = 3; /* I/O addresses are every 8 bytes */
p->uartclk = mips_hpt_frequency;
p->serial_in = octeon_serial_in;
p->serial_out = octeon_serial_out;
}
static int __init octeon_serial_init(void)
{
int enable_uart0;
int enable_uart1;
int enable_uart2;
struct plat_serial8250_port *p;
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
/*
* If we are configured to run as the second of two kernels,
* disable uart0 and enable uart1. Uart0 is owned by the first
* kernel
*/
enable_uart0 = 0;
enable_uart1 = 1;
#else
/*
* We are configured for the first kernel. We'll enable uart0
* if the bootloader told us to use 0, otherwise will enable
* uart 1.
*/
enable_uart0 = (octeon_get_boot_uart() == 0);
enable_uart1 = (octeon_get_boot_uart() == 1);
#ifdef CONFIG_KGDB
enable_uart1 = 1;
#endif
#endif
/* Right now CN52XX is the only chip with a third uart */
enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
p = octeon_uart8250_data;
if (enable_uart0) {
/* Add a ttyS device for hardware uart 0 */
octeon_uart_set_common(p);
p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
p->irq = OCTEON_IRQ_UART0;
p++;
}
if (enable_uart1) {
/* Add a ttyS device for hardware uart 1 */
octeon_uart_set_common(p);
p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
p->irq = OCTEON_IRQ_UART1;
p++;
}
if (enable_uart2) {
/* Add a ttyS device for hardware uart 2 */
octeon_uart_set_common(p);
p->membase = (void *) CVMX_MIO_UART2_RBR;
p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
p->irq = OCTEON_IRQ_UART2;
p++;
}
BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
return platform_device_register(&octeon_uart8250_device);
}
device_initcall(octeon_serial_init);
arch/mips/cavium-octeon/setup.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2007 Cavium Networks
* Copyright (C) 2008 Wind River Systems
*/
#include <linux/init.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/types.h>
#include <linux/string.h> /* for memset */
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/time.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/string.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/smp-ops.h>
#include <asm/system.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/bootinfo.h>
#include <asm/sections.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
#ifdef CONFIG_CAVIUM_DECODE_RSL
extern void cvmx_interrupt_rsl_decode(void);
extern int __cvmx_interrupt_ecc_report_single_bit_errors;
extern void cvmx_interrupt_rsl_enable(void);
#endif
extern struct plat_smp_ops octeon_smp_ops;
#ifdef CONFIG_PCI
extern void pci_console_init(const char *arg);
#endif
#ifdef CONFIG_CAVIUM_RESERVE32
extern uint64_t octeon_reserve32_memory;
#endif
static unsigned long long MAX_MEMORY = 512ull << 20;
struct octeon_boot_descriptor *octeon_boot_desc_ptr;
struct cvmx_bootinfo *octeon_bootinfo;
EXPORT_SYMBOL(octeon_bootinfo);
#ifdef CONFIG_CAVIUM_RESERVE32
uint64_t octeon_reserve32_memory;
EXPORT_SYMBOL(octeon_reserve32_memory);
#endif
static int octeon_uart;
extern asmlinkage void handle_int(void);
extern asmlinkage void plat_irq_dispatch(void);
/**
* Return non zero if we are currently running in the Octeon simulator
*
* Returns
*/
int octeon_is_simulation(void)
{
return octeon_bootinfo->board_type == CVMX_BOARD_TYPE_SIM;
}
EXPORT_SYMBOL(octeon_is_simulation);
/**
* Return true if Octeon is in PCI Host mode. This means
* Linux can control the PCI bus.
*
* Returns Non zero if Octeon in host mode.
*/
int octeon_is_pci_host(void)
{
#ifdef CONFIG_PCI
return octeon_bootinfo->config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST;
#else
return 0;
#endif
}
/**
* Get the clock rate of Octeon
*
* Returns Clock rate in HZ
*/
uint64_t octeon_get_clock_rate(void)
{
if (octeon_is_simulation())
octeon_bootinfo->eclock_hz = 6000000;
return octeon_bootinfo->eclock_hz;
}
EXPORT_SYMBOL(octeon_get_clock_rate);
/**
* Write to the LCD display connected to the bootbus. This display
* exists on most Cavium evaluation boards. If it doesn't exist, then
* this function doesn't do anything.
*
* @s: String to write
*/
void octeon_write_lcd(const char *s)
{
if (octeon_bootinfo->led_display_base_addr) {
void __iomem *lcd_address =
ioremap_nocache(octeon_bootinfo->led_display_base_addr,
8);
int i;
for (i = 0; i < 8; i++, s++) {
if (*s)
iowrite8(*s, lcd_address + i);
else
iowrite8(' ', lcd_address + i);
}
iounmap(lcd_address);
}
}
/**
* Return the console uart passed by the bootloader
*
* Returns uart (0 or 1)
*/
int octeon_get_boot_uart(void)
{
int uart;
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
uart = 1;
#else
uart = (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ?
1 : 0;
#endif
return uart;
}
/**
* Get the coremask Linux was booted on.
*
* Returns Core mask
*/
int octeon_get_boot_coremask(void)
{
return octeon_boot_desc_ptr->core_mask;
}
/**
* Check the hardware BIST results for a CPU
*/
void octeon_check_cpu_bist(void)
{
const int coreid = cvmx_get_core_num();
unsigned long long mask;
unsigned long long bist_val;
/* Check BIST results for COP0 registers */
mask = 0x1f00000000ull;
bist_val = read_octeon_c0_icacheerr();
if (bist_val & mask)
pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",
coreid, bist_val);
bist_val = read_octeon_c0_dcacheerr();
if (bist_val & 1)
pr_err("Core%d L1 Dcache parity error: "
"CacheErr(dcache) = 0x%llx\n",
coreid, bist_val);
mask = 0xfc00000000000000ull;
bist_val = read_c0_cvmmemctl();
if (bist_val & mask)
pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",
coreid, bist_val);
write_octeon_c0_dcacheerr(0);
}
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
/**
* Called on every core to setup the wired tlb entry needed
* if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
*
*/
static void octeon_hal_setup_per_cpu_reserved32(void *unused)
{
/*
* The config has selected to wire the reserve32 memory for all
* userspace applications. We need to put a wired TLB entry in for each
* 512MB of reserve32 memory. We only handle double 256MB pages here,
* so reserve32 must be multiple of 512MB.
*/
uint32_t size = CONFIG_CAVIUM_RESERVE32;
uint32_t entrylo0 =
0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
uint32_t entrylo1 = entrylo0 + (256 << 14);
uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
while (size >= 512) {
#if 0
pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
smp_processor_id(), entryhi);
#endif
add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
entrylo0 += 512 << 14;
entrylo1 += 512 << 14;
entryhi += 512 << 20;
size -= 512;
}
}
#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
/**
* Called to release the named block which was used to made sure
* that nobody used the memory for something else during
* init. Now we'll free it so userspace apps can use this
* memory region with bootmem_alloc.
*
* This function is called only once from prom_free_prom_memory().
*/
void octeon_hal_setup_reserved32(void)
{
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
#endif
}
/**
* Reboot Octeon
*
* @command: Command to pass to the bootloader. Currently ignored.
*/
static void octeon_restart(char *command)
{
/* Disable all watchdogs before soft reset. They don't get cleared */
#ifdef CONFIG_SMP
int cpu;
for_each_online_cpu(cpu)
cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0);
#else
cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
#endif
mb();
while (1)
cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
}
/**
* Permanently stop a core.
*
* @arg: Ignored.
*/
static void octeon_kill_core(void *arg)
{
mb();
if (octeon_is_simulation()) {
/* The simulator needs the watchdog to stop for dead cores */
cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
/* A break instruction causes the simulator stop a core */
asm volatile ("sync\nbreak");
}
}
/**
* Halt the system
*/
static void octeon_halt(void)
{
smp_call_function(octeon_kill_core, NULL, 0);
switch (octeon_bootinfo->board_type) {
case CVMX_BOARD_TYPE_NAO38:
/* Driving a 1 to GPIO 12 shuts off this board */
cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1);
cvmx_write_csr(CVMX_GPIO_TX_SET, 0x1000);
break;
default:
octeon_write_lcd("PowerOff");
break;
}
octeon_kill_core(NULL);
}
#if 0
/**
* Platform time init specifics.
* Returns
*/
void __init plat_time_init(void)
{
/* Nothing special here, but we are required to have one */
}
#endif
/**
* Handle all the error condition interrupts that might occur.
*
*/
#ifdef CONFIG_CAVIUM_DECODE_RSL
static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
{
cvmx_interrupt_rsl_decode();
return IRQ_HANDLED;
}
#endif
/**
* Return a string representing the system type
*
* Returns
*/
const char *octeon_board_type_string(void)
{
static char name[80];
sprintf(name, "%s (%s)",
cvmx_board_type_to_string(octeon_bootinfo->board_type),
octeon_model_get_string(read_c0_prid()));
return name;
}
const char *get_system_type(void)
__attribute__ ((alias("octeon_board_type_string")));
void octeon_user_io_init(void)
{
union octeon_cvmemctl cvmmemctl;
union cvmx_iob_fau_timeout fau_timeout;
union cvmx_pow_nw_tim nm_tim;
uint64_t cvmctl;
/* Get the current settings for CP0_CVMMEMCTL_REG */
cvmmemctl.u64 = read_c0_cvmmemctl();
/* R/W If set, marked write-buffer entries time out the same
* as as other entries; if clear, marked write-buffer entries
* use the maximum timeout. */
cvmmemctl.s.dismarkwblongto = 1;
/* R/W If set, a merged store does not clear the write-buffer
* entry timeout state. */
cvmmemctl.s.dismrgclrwbto = 0;
/* R/W Two bits that are the MSBs of the resultant CVMSEG LM
* word location for an IOBDMA. The other 8 bits come from the
* SCRADDR field of the IOBDMA. */
cvmmemctl.s.iobdmascrmsb = 0;
/* R/W If set, SYNCWS and SYNCS only order marked stores; if
* clear, SYNCWS and SYNCS only order unmarked
* stores. SYNCWSMARKED has no effect when DISSYNCWS is
* set. */
cvmmemctl.s.syncwsmarked = 0;
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */
cvmmemctl.s.dissyncws = 0;
/* R/W If set, no stall happens on write buffer full. */
if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2))
cvmmemctl.s.diswbfst = 1;
else
cvmmemctl.s.diswbfst = 0;
/* R/W If set (and SX set), supervisor-level loads/stores can
* use XKPHYS addresses with <48>==0 */
cvmmemctl.s.xkmemenas = 0;
/* R/W If set (and UX set), user-level loads/stores can use
* XKPHYS addresses with VA<48>==0 */
cvmmemctl.s.xkmemenau = 0;
/* R/W If set (and SX set), supervisor-level loads/stores can
* use XKPHYS addresses with VA<48>==1 */
cvmmemctl.s.xkioenas = 0;
/* R/W If set (and UX set), user-level loads/stores can use
* XKPHYS addresses with VA<48>==1 */
cvmmemctl.s.xkioenau = 0;
/* R/W If set, all stores act as SYNCW (NOMERGE must be set
* when this is set) RW, reset to 0. */
cvmmemctl.s.allsyncw = 0;
/* R/W If set, no stores merge, and all stores reach the
* coherent bus in order. */
cvmmemctl.s.nomerge = 0;
/* R/W Selects the bit in the counter used for DID time-outs 0
* = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is
* between 1x and 2x this interval. For example, with
* DIDTTO=3, expiration interval is between 16K and 32K. */
cvmmemctl.s.didtto = 0;
/* R/W If set, the (mem) CSR clock never turns off. */
cvmmemctl.s.csrckalwys = 0;
/* R/W If set, mclk never turns off. */
cvmmemctl.s.mclkalwys = 0;
/* R/W Selects the bit in the counter used for write buffer
* flush time-outs (WBFLT+11) is the bit position in an
* internal counter used to determine expiration. The write
* buffer expires between 1x and 2x this interval. For
* example, with WBFLT = 0, a write buffer expires between 2K
* and 4K cycles after the write buffer entry is allocated. */
cvmmemctl.s.wbfltime = 0;
/* R/W If set, do not put Istream in the L2 cache. */
cvmmemctl.s.istrnol2 = 0;
/* R/W The write buffer threshold. */
cvmmemctl.s.wbthresh = 10;
/* R/W If set, CVMSEG is available for loads/stores in
* kernel/debug mode. */
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
cvmmemctl.s.cvmsegenak = 1;
#else
cvmmemctl.s.cvmsegenak = 0;
#endif
/* R/W If set, CVMSEG is available for loads/stores in
* supervisor mode. */
cvmmemctl.s.cvmsegenas = 0;
/* R/W If set, CVMSEG is available for loads/stores in user
* mode. */
cvmmemctl.s.cvmsegenau = 0;
/* R/W Size of local memory in cache blocks, 54 (6912 bytes)
* is max legal value. */
cvmmemctl.s.lmemsz = CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE;
if (smp_processor_id() == 0)
pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
write_c0_cvmmemctl(cvmmemctl.u64);
/* Move the performance counter interrupts to IRQ 6 */
cvmctl = read_c0_cvmctl();
cvmctl &= ~(7 << 7);
cvmctl |= 6 << 7;
write_c0_cvmctl(cvmctl);
/* Set a default for the hardware timeouts */
fau_timeout.u64 = 0;
fau_timeout.s.tout_val = 0xfff;
/* Disable tagwait FAU timeout */
fau_timeout.s.tout_enb = 0;
cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64);
nm_tim.u64 = 0;
/* 4096 cycles */
nm_tim.s.nw_tim = 3;
cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64);
write_octeon_c0_icacheerr(0);
write_c0_derraddr1(0);
}
/**
* Early entry point for arch setup
*/
void __init prom_init(void)
{
struct cvmx_sysinfo *sysinfo;
const int coreid = cvmx_get_core_num();
int i;
int argc;
struct uart_port octeon_port;
#ifdef CONFIG_CAVIUM_RESERVE32
int64_t addr = -1;
#endif
/*
* The bootloader passes a pointer to the boot descriptor in
* $a3, this is available as fw_arg3.
*/
octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
octeon_bootinfo =
cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr));
/*
* Only enable the LED controller if we're running on a CN38XX, CN58XX,
* or CN56XX. The CN30XX and CN31XX don't have an LED controller.
*/
if (!octeon_is_simulation() &&
octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER)) {
cvmx_write_csr(CVMX_LED_EN, 0);
cvmx_write_csr(CVMX_LED_PRT, 0);
cvmx_write_csr(CVMX_LED_DBG, 0);
cvmx_write_csr(CVMX_LED_PRT_FMT, 0);
cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32);
cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32);
cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0);
cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0);
cvmx_write_csr(CVMX_LED_EN, 1);
}
#ifdef CONFIG_CAVIUM_RESERVE32
/*
* We need to temporarily allocate all memory in the reserve32
* region. This makes sure the kernel doesn't allocate this
* memory when it is getting memory from the
* bootloader. Later, after the memory allocations are
* complete, the reserve32 will be freed.
*/
#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
"This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
"is set\n");
else
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
0, 0, 512 << 20,
"CAVIUM_RESERVE32", 0);
#else
/*
* Allocate memory for RESERVED32 aligned on 2MB boundary. This
* is in case we later use hugetlb entries with it.
*/
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
0, 0, 2 << 20,
"CAVIUM_RESERVE32", 0);
#endif
if (addr < 0)
pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
else
octeon_reserve32_memory = addr;
#endif
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2
if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) {
pr_info("Skipping L2 locking due to reduced L2 cache size\n");
} else {
uint32_t ebase = read_c0_ebase() & 0x3ffff000;
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
/* TLB refill */
cvmx_l2c_lock_mem_region(ebase, 0x100);
#endif
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION
/* General exception */
cvmx_l2c_lock_mem_region(ebase + 0x180, 0x80);
#endif
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
/* Interrupt handler */
cvmx_l2c_lock_mem_region(ebase + 0x200, 0x80);
#endif
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT
cvmx_l2c_lock_mem_region(__pa_symbol(handle_int), 0x100);
cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch), 0x80);
#endif
#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY
cvmx_l2c_lock_mem_region(__pa_symbol(memcpy), 0x480);
#endif
}
#endif
sysinfo = cvmx_sysinfo_get();
memset(sysinfo, 0, sizeof(*sysinfo));
sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20;
sysinfo->phy_mem_desc_ptr =
cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr);
sysinfo->core_mask = octeon_bootinfo->core_mask;
sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr;
sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz;
sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2;
sysinfo->board_type = octeon_bootinfo->board_type;
sysinfo->board_rev_major = octeon_bootinfo->board_rev_major;
sysinfo->board_rev_minor = octeon_bootinfo->board_rev_minor;
memcpy(sysinfo->mac_addr_base, octeon_bootinfo->mac_addr_base,
sizeof(sysinfo->mac_addr_base));
sysinfo->mac_addr_count = octeon_bootinfo->mac_addr_count;
memcpy(sysinfo->board_serial_number,
octeon_bootinfo->board_serial_number,
sizeof(sysinfo->board_serial_number));
sysinfo->compact_flash_common_base_addr =
octeon_bootinfo->compact_flash_common_base_addr;
sysinfo->compact_flash_attribute_base_addr =
octeon_bootinfo->compact_flash_attribute_base_addr;
sysinfo->led_display_base_addr = octeon_bootinfo->led_display_base_addr;
sysinfo->dfa_ref_clock_hz = octeon_bootinfo->dfa_ref_clock_hz;
sysinfo->bootloader_config_flags = octeon_bootinfo->config_flags;
octeon_check_cpu_bist();
octeon_uart = octeon_get_boot_uart();
/*
* Disable All CIU Interrupts. The ones we need will be
* enabled later. Read the SUM register so we know the write
* completed.
*/
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid * 2)));
#ifdef CONFIG_SMP
octeon_write_lcd("LinuxSMP");
#else
octeon_write_lcd("Linux");
#endif
#ifdef CONFIG_CAVIUM_GDB
/*
* When debugging the linux kernel, force the cores to enter
* the debug exception handler to break in.
*/
if (octeon_get_boot_debug_flag()) {
cvmx_write_csr(CVMX_CIU_DINT, 1 << cvmx_get_core_num());
cvmx_read_csr(CVMX_CIU_DINT);
}
#endif
/*
* BIST should always be enabled when doing a soft reset. L2
* Cache locking for instance is not cleared unless BIST is
* enabled. Unfortunately due to a chip errata G-200 for
* Cn38XX and CN31XX, BIST msut be disabled on these parts.
*/
if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
OCTEON_IS_MODEL(OCTEON_CN31XX))
cvmx_write_csr(CVMX_CIU_SOFT_BIST, 0);
else
cvmx_write_csr(CVMX_CIU_SOFT_BIST, 1);
/* Default to 64MB in the simulator to speed things up */
if (octeon_is_simulation())
MAX_MEMORY = 64ull << 20;
arcs_cmdline[0] = 0;
argc = octeon_boot_desc_ptr->argc;
for (i = 0; i < argc; i++) {
const char *arg =
cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
if ((strncmp(arg, "MEM=", 4) == 0) ||
(strncmp(arg, "mem=", 4) == 0)) {
sscanf(arg + 4, "%llu", &MAX_MEMORY);
MAX_MEMORY <<= 20;
if (MAX_MEMORY == 0)
MAX_MEMORY = 32ull << 30;
} else if (strcmp(arg, "ecc_verbose") == 0) {
#ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
__cvmx_interrupt_ecc_report_single_bit_errors = 1;
pr_notice("Reporting of single bit ECC errors is "
"turned on\n");
#endif
} else if (strlen(arcs_cmdline) + strlen(arg) + 1 <
sizeof(arcs_cmdline) - 1) {
strcat(arcs_cmdline, " ");
strcat(arcs_cmdline, arg);
}
}
if (strstr(arcs_cmdline, "console=") == NULL) {
#ifdef CONFIG_GDB_CONSOLE
strcat(arcs_cmdline, " console=gdb");
#else
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
strcat(arcs_cmdline, " console=ttyS0,115200");
#else
if (octeon_uart == 1)
strcat(arcs_cmdline, " console=ttyS1,115200");
else
strcat(arcs_cmdline, " console=ttyS0,115200");
#endif
#endif
}
if (octeon_is_simulation()) {
/*
* The simulator uses a mtdram device pre filled with
* the filesystem. Also specify the calibration delay
* to avoid calculating it every time.
*/
strcat(arcs_cmdline, " rw root=1f00"
" lpj=60176 slram=root,0x40000000,+1073741824");
}
mips_hpt_frequency = octeon_get_clock_rate();
octeon_init_cvmcount();
_machine_restart = octeon_restart;
_machine_halt = octeon_halt;
memset(&octeon_port, 0, sizeof(octeon_port));
/*
* For early_serial_setup we don't set the port type or
* UPF_FIXED_TYPE.
*/
octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
octeon_port.iotype = UPIO_MEM;
/* I/O addresses are every 8 bytes */
octeon_port.regshift = 3;
/* Clock rate of the chip */
octeon_port.uartclk = mips_hpt_frequency;
octeon_port.fifosize = 64;
octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
octeon_port.serial_in = octeon_serial_in;
octeon_port.serial_out = octeon_serial_out;
#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
octeon_port.line = 0;
#else
octeon_port.line = octeon_uart;
#endif
octeon_port.irq = 42 + octeon_uart;
early_serial_setup(&octeon_port);
octeon_user_io_init();
register_smp_ops(&octeon_smp_ops);
}
void __init plat_mem_setup(void)
{
uint64_t mem_alloc_size;
uint64_t total;
int64_t memory;
total = 0;
/* First add the init memory we will be returning. */
memory = __pa_symbol(&__init_begin) & PAGE_MASK;
mem_alloc_size = (__pa_symbol(&__init_end) & PAGE_MASK) - memory;
if (mem_alloc_size > 0) {
add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
total += mem_alloc_size;
}
/*
* The Mips memory init uses the first memory location for
* some memory vectors. When SPARSEMEM is in use, it doesn't
* verify that the size is big enough for the final
* vectors. Making the smallest chuck 4MB seems to be enough
* to consistantly work.
*/
mem_alloc_size = 4 << 20;
if (mem_alloc_size > MAX_MEMORY)
mem_alloc_size = MAX_MEMORY;
/*
* When allocating memory, we want incrementing addresses from
* bootmem_alloc so the code in add_memory_region can merge
* regions next to each other.
*/
cvmx_bootmem_lock();
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) {
#if defined(CONFIG_64BIT) || defined(CONFIG_64BIT_PHYS_ADDR)
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&__init_end), -1,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
#elif defined(CONFIG_HIGHMEM)
memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 1ull << 31,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
#else
memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 512 << 20,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
#endif
if (memory >= 0) {
/*
* This function automatically merges address
* regions next to each other if they are
* received in incrementing order.
*/
add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
total += mem_alloc_size;
} else {
break;
}
}
cvmx_bootmem_unlock();
#ifdef CONFIG_CAVIUM_RESERVE32
/*
* Now that we've allocated the kernel memory it is safe to
* free the reserved region. We free it here so that builtin
* drivers can use the memory.
*/
if (octeon_reserve32_memory)
cvmx_bootmem_free_named("CAVIUM_RESERVE32");
#endif /* CONFIG_CAVIUM_RESERVE32 */
if (total == 0)
panic("Unable to allocate memory from "
"cvmx_bootmem_phy_alloc\n");
}
int prom_putchar(char c)
{
uint64_t lsrval;
/* Spin until there is room */
do {
lsrval = cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart));
} while ((lsrval & 0x20) == 0);
/* Write the byte */
cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
return 1;
}
void prom_free_prom_memory(void)
{
#ifdef CONFIG_CAVIUM_DECODE_RSL
cvmx_interrupt_rsl_enable();
/* Add an interrupt handler for general failures. */
if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED,
"RML/RSL", octeon_rlm_interrupt)) {
panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
}
#endif
/* This call is here so that it is performed after any TLB
initializations. It needs to be after these in case the
CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
octeon_hal_setup_reserved32();
}
static struct octeon_cf_data octeon_cf_data;
static int __init octeon_cf_device_init(void)
{
union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
unsigned long base_ptr, region_base, region_size;
struct platform_device *pd;
struct resource cf_resources[3];
unsigned int num_resources;
int i;
int ret = 0;
/* Setup octeon-cf platform device if present. */
base_ptr = 0;
if (octeon_bootinfo->major_version == 1
&& octeon_bootinfo->minor_version >= 1) {
if (octeon_bootinfo->compact_flash_common_base_addr)
base_ptr =
octeon_bootinfo->compact_flash_common_base_addr;
} else {
base_ptr = 0x1d000800;
}
if (!base_ptr)
return ret;
/* Find CS0 region. */
for (i = 0; i < 8; i++) {
mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
region_base = mio_boot_reg_cfg.s.base << 16;
region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
&& base_ptr < region_base + region_size)
break;
}
if (i >= 7) {
/* i and i + 1 are CS0 and CS1, both must be less than 8. */
goto out;
}
octeon_cf_data.base_region = i;
octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
octeon_cf_data.base_region_bias = base_ptr - region_base;
memset(cf_resources, 0, sizeof(cf_resources));
num_resources = 0;
cf_resources[num_resources].flags = IORESOURCE_MEM;
cf_resources[num_resources].start = region_base;
cf_resources[num_resources].end = region_base + region_size - 1;
num_resources++;
if (!(base_ptr & 0xfffful)) {
/*
* Boot loader signals availability of DMA (true_ide
* mode) by setting low order bits of base_ptr to
* zero.
*/
/* Asume that CS1 immediately follows. */
mio_boot_reg_cfg.u64 =
cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
region_base = mio_boot_reg_cfg.s.base << 16;
region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
if (!mio_boot_reg_cfg.s.en)
goto out;
cf_resources[num_resources].flags = IORESOURCE_MEM;
cf_resources[num_resources].start = region_base;
cf_resources[num_resources].end = region_base + region_size - 1;
num_resources++;
octeon_cf_data.dma_engine = 0;
cf_resources[num_resources].flags = IORESOURCE_IRQ;
cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA;
cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA;
num_resources++;
} else {
octeon_cf_data.dma_engine = -1;
}
pd = platform_device_alloc("pata_octeon_cf", -1);
if (!pd) {
ret = -ENOMEM;
goto out;
}
pd->dev.platform_data = &octeon_cf_data;
ret = platform_device_add_resources(pd, cf_resources, num_resources);
if (ret)
goto fail;
ret = platform_device_add(pd);
if (ret)
goto fail;
return ret;
fail:
platform_device_put(pd);
out:
return ret;
}
device_initcall(octeon_cf_device_init);
arch/mips/cavium-octeon/smp.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2008 Cavium Networks
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <asm/mmu_context.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
volatile unsigned long octeon_processor_boot = 0xff;
volatile unsigned long octeon_processor_sp;
volatile unsigned long octeon_processor_gp;
static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
{
const int coreid = cvmx_get_core_num();
uint64_t action;
/* Load the mailbox register to figure out what we're supposed to do */
action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
/* Clear the mailbox to clear the interrupt */
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
/* Check if we've been told to flush the icache */
if (action & SMP_ICACHE_FLUSH)
asm volatile ("synci 0($0)\n");
return IRQ_HANDLED;
}
/**
* Cause the function described by call_data to be executed on the passed
* cpu. When the function has finished, increment the finished field of
* call_data.
*/
void octeon_send_ipi_single(int cpu, unsigned int action)
{
int coreid = cpu_logical_map(cpu);
/*
pr_info("SMP: Mailbox send cpu=%d, coreid=%d, action=%u\n", cpu,
coreid, action);
*/
cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action);
}
static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action)
{
unsigned int i;
for_each_cpu_mask(i, mask)
octeon_send_ipi_single(i, action);
}
/**
* Detect available CPUs, populate phys_cpu_present_map
*/
static void octeon_smp_setup(void)
{
const int coreid = cvmx_get_core_num();
int cpus;
int id;
int core_mask = octeon_get_boot_coremask();
cpus_clear(cpu_possible_map);
__cpu_number_map[coreid] = 0;
__cpu_logical_map[0] = coreid;
cpu_set(0, cpu_possible_map);
cpus = 1;
for (id = 0; id < 16; id++) {
if ((id != coreid) && (core_mask & (1 << id))) {
cpu_set(cpus, cpu_possible_map);
__cpu_number_map[id] = cpus;
__cpu_logical_map[cpus] = id;
cpus++;
}
}
}
/**
* Firmware CPU startup hook
*
*/
static void octeon_boot_secondary(int cpu, struct task_struct *idle)
{
int count;
pr_info("SMP: Booting CPU%02d (CoreId %2d)...\n", cpu,
cpu_logical_map(cpu));
octeon_processor_sp = __KSTK_TOS(idle);
octeon_processor_gp = (unsigned long)(task_thread_info(idle));
octeon_processor_boot = cpu_logical_map(cpu);
mb();
count = 10000;
while (octeon_processor_sp && count) {
/* Waiting for processor to get the SP and GP */
udelay(1);
count--;
}
if (count == 0)
pr_err("Secondary boot timeout\n");
}
/**
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
static void octeon_init_secondary(void)
{
const int coreid = cvmx_get_core_num();
union cvmx_ciu_intx_sum0 interrupt_enable;
octeon_check_cpu_bist();
octeon_init_cvmcount();
/*
pr_info("SMP: CPU%d (CoreId %lu) started\n", cpu, coreid);
*/
/* Enable Mailbox interrupts to this core. These are the only
interrupts allowed on line 3 */
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), 0xffffffff);
interrupt_enable.u64 = 0;
interrupt_enable.s.mbox = 0x3;
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), interrupt_enable.u64);
cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
/* Enable core interrupt processing for 2,3 and 7 */
set_c0_status(0x8c01);
}
/**
* Callout to firmware before smp_init
*
*/
void octeon_prepare_cpus(unsigned int max_cpus)
{
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
"mailbox0", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
"mailbox1", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
}
}
/**
* Last chance for the board code to finish SMP initialization before
* the CPU is "online".
*/
static void octeon_smp_finish(void)
{
#ifdef CONFIG_CAVIUM_GDB
unsigned long tmp;
/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
to be not masked by this core so we know the signal is received by
someone */
asm volatile ("dmfc0 %0, $22\n"
"ori %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
#endif
octeon_user_io_init();
/* to generate the first CPU timer interrupt */
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
}
/**
* Hook for after all CPUs are online
*/
static void octeon_cpus_done(void)
{
#ifdef CONFIG_CAVIUM_GDB
unsigned long tmp;
/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
to be not masked by this core so we know the signal is received by
someone */
asm volatile ("dmfc0 %0, $22\n"
"ori %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
#endif
}
struct plat_smp_ops octeon_smp_ops = {
.send_ipi_single = octeon_send_ipi_single,
.send_ipi_mask = octeon_send_ipi_mask,
.init_secondary = octeon_init_secondary,
.smp_finish = octeon_smp_finish,
.cpus_done = octeon_cpus_done,
.boot_secondary = octeon_boot_secondary,
.smp_setup = octeon_smp_setup,
.prepare_cpus = octeon_prepare_cpus,
};
arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004 Cavium Networks
*/
#ifndef __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
#include <linux/types.h>
#include <asm/mipsregs.h>
/*
* Cavium Octeons are MIPS64v2 processors
*/
#define cpu_dcache_line_size() 128
#define cpu_icache_line_size() 128
#define cpu_has_4kex 1
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 0
#define cpu_has_tx39_cache 0
#define cpu_has_fpu 0
#define cpu_has_counter 1
#define cpu_has_watch 1
#define cpu_has_divec 1
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_prefetch 1
/*
* We should disable LL/SC on non SMP systems as it is faster to
* disable interrupts for atomic access than a LL/SC. Unfortunatly we
* cannot as this breaks asm/futex.h
*/
#define cpu_has_llsc 1
#define cpu_has_vtag_icache 1
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_64bits 1
#define cpu_has_octeon_cache 1
#define cpu_has_saa octeon_has_saa()
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 1
#define cpu_has_dsp 0
#define cpu_has_mipsmt 0
#define cpu_has_userlocal 0
#define cpu_has_vint 0
#define cpu_has_veic 0
#define ARCH_HAS_READ_CURRENT_TIMER 1
#define ARCH_HAS_IRQ_PER_CPU 1
#define ARCH_HAS_SPINLOCK_PREFETCH 1
#define spin_lock_prefetch(x) prefetch(x)
#define PREFETCH_STRIDE 128
static inline int read_current_timer(unsigned long *result)
{
asm volatile ("rdhwr %0,$31\n"
#ifndef CONFIG_64BIT
"\tsll %0, 0"
#endif
: "=r" (*result));
return 0;
}
static inline int octeon_has_saa(void)
{
int id;
asm volatile ("mfc0 %0, $15,0" : "=r" (id));
return id >= 0x000d0300;
}
#endif
arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
*
*
* Similar to mach-generic/dma-coherence.h except
* plat_device_is_coherent hard coded to return 1.
*
*/
#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
struct device;
dma_addr_t octeon_map_dma_mem(struct device *, void *, size_t);
void octeon_unmap_dma_mem(struct device *, dma_addr_t);
static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
return octeon_map_dma_mem(dev, addr, size);
}
static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
return octeon_map_dma_mem(dev, page_address(page), PAGE_SIZE);
}
static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
{
return dma_addr;
}
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
{
octeon_unmap_dma_mem(dev, dma_addr);
}
static inline int plat_dma_supported(struct device *dev, u64 mask)
{
return 1;
}
static inline void plat_extra_sync_for_device(struct device *dev)
{
mb();
}
static inline int plat_device_is_coherent(struct device *dev)
{
return 1;
}
static inline int plat_dma_mapping_error(struct device *dev,
dma_addr_t dma_addr)
{
return dma_addr == -1;
}
#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
arch/mips/include/asm/mach-cavium-octeon/irq.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2008 Cavium Networks
*/
#ifndef __OCTEON_IRQ_H__
#define __OCTEON_IRQ_H__
#define NR_IRQS OCTEON_IRQ_LAST
#define MIPS_CPU_IRQ_BASE OCTEON_IRQ_SW0
/* 0 - 7 represent the i8259 master */
#define OCTEON_IRQ_I8259M0 0
#define OCTEON_IRQ_I8259M1 1
#define OCTEON_IRQ_I8259M2 2
#define OCTEON_IRQ_I8259M3 3
#define OCTEON_IRQ_I8259M4 4
#define OCTEON_IRQ_I8259M5 5
#define OCTEON_IRQ_I8259M6 6
#define OCTEON_IRQ_I8259M7 7
/* 8 - 15 represent the i8259 slave */
#define OCTEON_IRQ_I8259S0 8
#define OCTEON_IRQ_I8259S1 9
#define OCTEON_IRQ_I8259S2 10
#define OCTEON_IRQ_I8259S3 11
#define OCTEON_IRQ_I8259S4 12
#define OCTEON_IRQ_I8259S5 13
#define OCTEON_IRQ_I8259S6 14
#define OCTEON_IRQ_I8259S7 15
/* 16 - 23 represent the 8 MIPS standard interrupt sources */
#define OCTEON_IRQ_SW0 16
#define OCTEON_IRQ_SW1 17
#define OCTEON_IRQ_CIU0 18
#define OCTEON_IRQ_CIU1 19
#define OCTEON_IRQ_CIU4 20
#define OCTEON_IRQ_5 21
#define OCTEON_IRQ_PERF 22
#define OCTEON_IRQ_TIMER 23
/* 24 - 87 represent the sources in CIU_INTX_EN0 */
#define OCTEON_IRQ_WORKQ0 24
#define OCTEON_IRQ_WORKQ1 25
#define OCTEON_IRQ_WORKQ2 26
#define OCTEON_IRQ_WORKQ3 27
#define OCTEON_IRQ_WORKQ4 28
#define OCTEON_IRQ_WORKQ5 29
#define OCTEON_IRQ_WORKQ6 30
#define OCTEON_IRQ_WORKQ7 31
#define OCTEON_IRQ_WORKQ8 32
#define OCTEON_IRQ_WORKQ9 33
#define OCTEON_IRQ_WORKQ10 34
#define OCTEON_IRQ_WORKQ11 35
#define OCTEON_IRQ_WORKQ12 36
#define OCTEON_IRQ_WORKQ13 37
#define OCTEON_IRQ_WORKQ14 38
#define OCTEON_IRQ_WORKQ15 39
#define OCTEON_IRQ_GPIO0 40
#define OCTEON_IRQ_GPIO1 41
#define OCTEON_IRQ_GPIO2 42
#define OCTEON_IRQ_GPIO3 43
#define OCTEON_IRQ_GPIO4 44
#define OCTEON_IRQ_GPIO5 45
#define OCTEON_IRQ_GPIO6 46
#define OCTEON_IRQ_GPIO7 47
#define OCTEON_IRQ_GPIO8 48
#define OCTEON_IRQ_GPIO9 49
#define OCTEON_IRQ_GPIO10 50
#define OCTEON_IRQ_GPIO11 51
#define OCTEON_IRQ_GPIO12 52
#define OCTEON_IRQ_GPIO13 53
#define OCTEON_IRQ_GPIO14 54
#define OCTEON_IRQ_GPIO15 55
#define OCTEON_IRQ_MBOX0 56
#define OCTEON_IRQ_MBOX1 57
#define OCTEON_IRQ_UART0 58
#define OCTEON_IRQ_UART1 59
#define OCTEON_IRQ_PCI_INT0 60
#define OCTEON_IRQ_PCI_INT1 61
#define OCTEON_IRQ_PCI_INT2 62
#define OCTEON_IRQ_PCI_INT3 63
#define OCTEON_IRQ_PCI_MSI0 64
#define OCTEON_IRQ_PCI_MSI1 65
#define OCTEON_IRQ_PCI_MSI2 66
#define OCTEON_IRQ_PCI_MSI3 67
#define OCTEON_IRQ_RESERVED68 68 /* Summary of CIU_INT_SUM1 */
#define OCTEON_IRQ_TWSI 69
#define OCTEON_IRQ_RML 70
#define OCTEON_IRQ_TRACE 71
#define OCTEON_IRQ_GMX_DRP0 72
#define OCTEON_IRQ_GMX_DRP1 73
#define OCTEON_IRQ_IPD_DRP 74
#define OCTEON_IRQ_KEY_ZERO 75
#define OCTEON_IRQ_TIMER0 76
#define OCTEON_IRQ_TIMER1 77
#define OCTEON_IRQ_TIMER2 78
#define OCTEON_IRQ_TIMER3 79
#define OCTEON_IRQ_USB0 80
#define OCTEON_IRQ_PCM 81
#define OCTEON_IRQ_MPI 82
#define OCTEON_IRQ_TWSI2 83
#define OCTEON_IRQ_POWIQ 84
#define OCTEON_IRQ_IPDPPTHR 85
#define OCTEON_IRQ_MII0 86
#define OCTEON_IRQ_BOOTDMA 87
/* 88 - 151 represent the sources in CIU_INTX_EN1 */
#define OCTEON_IRQ_WDOG0 88
#define OCTEON_IRQ_WDOG1 89
#define OCTEON_IRQ_WDOG2 90
#define OCTEON_IRQ_WDOG3 91
#define OCTEON_IRQ_WDOG4 92
#define OCTEON_IRQ_WDOG5 93
#define OCTEON_IRQ_WDOG6 94
#define OCTEON_IRQ_WDOG7 95
#define OCTEON_IRQ_WDOG8 96
#define OCTEON_IRQ_WDOG9 97
#define OCTEON_IRQ_WDOG10 98
#define OCTEON_IRQ_WDOG11 99
#define OCTEON_IRQ_WDOG12 100
#define OCTEON_IRQ_WDOG13 101
#define OCTEON_IRQ_WDOG14 102
#define OCTEON_IRQ_WDOG15 103
#define OCTEON_IRQ_UART2 104
#define OCTEON_IRQ_USB1 105
#define OCTEON_IRQ_MII1 106
#define OCTEON_IRQ_RESERVED107 107
#define OCTEON_IRQ_RESERVED108 108
#define OCTEON_IRQ_RESERVED109 109
#define OCTEON_IRQ_RESERVED110 110
#define OCTEON_IRQ_RESERVED111 111
#define OCTEON_IRQ_RESERVED112 112
#define OCTEON_IRQ_RESERVED113 113
#define OCTEON_IRQ_RESERVED114 114
#define OCTEON_IRQ_RESERVED115 115
#define OCTEON_IRQ_RESERVED116 116
#define OCTEON_IRQ_RESERVED117 117
#define OCTEON_IRQ_RESERVED118 118
#define OCTEON_IRQ_RESERVED119 119
#define OCTEON_IRQ_RESERVED120 120
#define OCTEON_IRQ_RESERVED121 121
#define OCTEON_IRQ_RESERVED122 122
#define OCTEON_IRQ_RESERVED123 123
#define OCTEON_IRQ_RESERVED124 124
#define OCTEON_IRQ_RESERVED125 125
#define OCTEON_IRQ_RESERVED126 126
#define OCTEON_IRQ_RESERVED127 127
#define OCTEON_IRQ_RESERVED128 128
#define OCTEON_IRQ_RESERVED129 129
#define OCTEON_IRQ_RESERVED130 130
#define OCTEON_IRQ_RESERVED131 131
#define OCTEON_IRQ_RESERVED132 132
#define OCTEON_IRQ_RESERVED133 133
#define OCTEON_IRQ_RESERVED134 134
#define OCTEON_IRQ_RESERVED135 135
#define OCTEON_IRQ_RESERVED136 136
#define OCTEON_IRQ_RESERVED137 137
#define OCTEON_IRQ_RESERVED138 138
#define OCTEON_IRQ_RESERVED139 139
#define OCTEON_IRQ_RESERVED140 140
#define OCTEON_IRQ_RESERVED141 141
#define OCTEON_IRQ_RESERVED142 142
#define OCTEON_IRQ_RESERVED143 143
#define OCTEON_IRQ_RESERVED144 144
#define OCTEON_IRQ_RESERVED145 145
#define OCTEON_IRQ_RESERVED146 146
#define OCTEON_IRQ_RESERVED147 147
#define OCTEON_IRQ_RESERVED148 148
#define OCTEON_IRQ_RESERVED149 149
#define OCTEON_IRQ_RESERVED150 150
#define OCTEON_IRQ_RESERVED151 151
#ifdef CONFIG_PCI_MSI
/* 152 - 215 represent the MSI interrupts 0-63 */
#define OCTEON_IRQ_MSI_BIT0 152
#define OCTEON_IRQ_MSI_BIT1 153
#define OCTEON_IRQ_MSI_BIT2 154
#define OCTEON_IRQ_MSI_BIT3 155
#define OCTEON_IRQ_MSI_BIT4 156
#define OCTEON_IRQ_MSI_BIT5 157
#define OCTEON_IRQ_MSI_BIT6 158
#define OCTEON_IRQ_MSI_BIT7 159
#define OCTEON_IRQ_MSI_BIT8 160
#define OCTEON_IRQ_MSI_BIT9 161
#define OCTEON_IRQ_MSI_BIT10 162
#define OCTEON_IRQ_MSI_BIT11 163
#define OCTEON_IRQ_MSI_BIT12 164
#define OCTEON_IRQ_MSI_BIT13 165
#define OCTEON_IRQ_MSI_BIT14 166
#define OCTEON_IRQ_MSI_BIT15 167
#define OCTEON_IRQ_MSI_BIT16 168
#define OCTEON_IRQ_MSI_BIT17 169
#define OCTEON_IRQ_MSI_BIT18 170
#define OCTEON_IRQ_MSI_BIT19 171
#define OCTEON_IRQ_MSI_BIT20 172
#define OCTEON_IRQ_MSI_BIT21 173
#define OCTEON_IRQ_MSI_BIT22 174
#define OCTEON_IRQ_MSI_BIT23 175
#define OCTEON_IRQ_MSI_BIT24 176
#define OCTEON_IRQ_MSI_BIT25 177
#define OCTEON_IRQ_MSI_BIT26 178
#define OCTEON_IRQ_MSI_BIT27 179
#define OCTEON_IRQ_MSI_BIT28 180
#define OCTEON_IRQ_MSI_BIT29 181
#define OCTEON_IRQ_MSI_BIT30 182
#define OCTEON_IRQ_MSI_BIT31 183
#define OCTEON_IRQ_MSI_BIT32 184
#define OCTEON_IRQ_MSI_BIT33 185
#define OCTEON_IRQ_MSI_BIT34 186
#define OCTEON_IRQ_MSI_BIT35 187
#define OCTEON_IRQ_MSI_BIT36 188
#define OCTEON_IRQ_MSI_BIT37 189
#define OCTEON_IRQ_MSI_BIT38 190
#define OCTEON_IRQ_MSI_BIT39 191
#define OCTEON_IRQ_MSI_BIT40 192
#define OCTEON_IRQ_MSI_BIT41 193
#define OCTEON_IRQ_MSI_BIT42 194
#define OCTEON_IRQ_MSI_BIT43 195
#define OCTEON_IRQ_MSI_BIT44 196
#define OCTEON_IRQ_MSI_BIT45 197
#define OCTEON_IRQ_MSI_BIT46 198
#define OCTEON_IRQ_MSI_BIT47 199
#define OCTEON_IRQ_MSI_BIT48 200
#define OCTEON_IRQ_MSI_BIT49 201
#define OCTEON_IRQ_MSI_BIT50 202
#define OCTEON_IRQ_MSI_BIT51 203
#define OCTEON_IRQ_MSI_BIT52 204
#define OCTEON_IRQ_MSI_BIT53 205
#define OCTEON_IRQ_MSI_BIT54 206
#define OCTEON_IRQ_MSI_BIT55 207
#define OCTEON_IRQ_MSI_BIT56 208
#define OCTEON_IRQ_MSI_BIT57 209
#define OCTEON_IRQ_MSI_BIT58 210
#define OCTEON_IRQ_MSI_BIT59 211
#define OCTEON_IRQ_MSI_BIT60 212
#define OCTEON_IRQ_MSI_BIT61 213
#define OCTEON_IRQ_MSI_BIT62 214
#define OCTEON_IRQ_MSI_BIT63 215
#define OCTEON_IRQ_LAST 216
#else
#define OCTEON_IRQ_LAST 152
#endif
#endif
arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2005-2008 Cavium Networks, Inc
*/
#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
#define CP0_CYCLE_COUNTER $9, 6
#define CP0_CVMCTL_REG $9, 7
#define CP0_CVMMEMCTL_REG $11,7
#define CP0_PRID_REG $15, 0
#define CP0_PRID_OCTEON_PASS1 0x000d0000
#define CP0_PRID_OCTEON_CN30XX 0x000d0200
.macro kernel_entry_setup
# Registers set by bootloader:
# (only 32 bits set by bootloader, all addresses are physical
# addresses, and need to have the appropriate memory region set
# by the kernel
# a0 = argc
# a1 = argv (kseg0 compat addr)
# a2 = 1 if init core, zero otherwise
# a3 = address of boot descriptor block
.set push
.set arch=octeon
# Read the cavium mem control register
dmfc0 v0, CP0_CVMMEMCTL_REG
# Clear the lower 6 bits, the CVMSEG size
dins v0, $0, 0, 6
ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register
dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register
#ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED
# Disable unaligned load/store support but leave HW fixup enabled
or v0, v0, 0x5001
xor v0, v0, 0x1001
#else
# Disable unaligned load/store and HW fixup support
or v0, v0, 0x5001
xor v0, v0, 0x5001
#endif
# Read the processor ID register
mfc0 v1, CP0_PRID_REG
# Disable instruction prefetching (Octeon Pass1 errata)
or v0, v0, 0x2000
# Skip reenable of prefetching for Octeon Pass1
beq v1, CP0_PRID_OCTEON_PASS1, skip
nop
# Reenable instruction prefetching, not on Pass1
xor v0, v0, 0x2000
# Strip off pass number off of processor id
srl v1, 8
sll v1, 8
# CN30XX needs some extra stuff turned off for better performance
bne v1, CP0_PRID_OCTEON_CN30XX, skip
nop
# CN30XX Use random Icache replacement
or v0, v0, 0x400
# CN30XX Disable instruction prefetching
or v0, v0, 0x2000
skip:
# Write the cavium control register
dmtc0 v0, CP0_CVMCTL_REG
sync
# Flush dcache after config change
cache 9, 0($0)
# Get my core id
rdhwr v0, $0
# Jump the master to kernel_entry
bne a2, zero, octeon_main_processor
nop
#ifdef CONFIG_SMP
#
# All cores other than the master need to wait here for SMP bootstrap
# to begin
#
# This is the variable where the next core to boot os stored
PTR_LA t0, octeon_processor_boot
octeon_spin_wait_boot:
# Get the core id of the next to be booted
LONG_L t1, (t0)
# Keep looping if it isn't me
bne t1, v0, octeon_spin_wait_boot
nop
# Get my GP from the global variable
PTR_LA t0, octeon_processor_gp
LONG_L gp, (t0)
# Get my SP from the global variable
PTR_LA t0, octeon_processor_sp
LONG_L sp, (t0)
# Set the SP global variable to zero so the master knows we've started
LONG_S zero, (t0)
#ifdef __OCTEON__
syncw
syncw
#else
sync
#endif
# Jump to the normal Linux SMP entry point
j smp_bootstrap
nop
#else /* CONFIG_SMP */
#
# Someone tried to boot SMP with a non SMP kernel. All extra cores
# will halt here.
#
octeon_wait_forever:
wait
b octeon_wait_forever
nop
#endif /* CONFIG_SMP */
octeon_main_processor:
.set pop
.endm
/*
* Do SMP slave processor setup necessary before we can savely execute C code.
*/
.macro smp_slave_setup
.endm
#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */
arch/mips/include/asm/mach-cavium-octeon/war.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) 2008 Cavium Networks <support@caviumnetworks.com>
*/
#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H */
arch/mips/include/asm/octeon/octeon.h 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2008 Cavium Networks
*/
#ifndef __ASM_OCTEON_OCTEON_H
#define __ASM_OCTEON_OCTEON_H
#include "cvmx.h"
extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
uint64_t alignment,
uint64_t min_addr,
uint64_t max_addr,
int do_locking);
extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
int do_locking);
extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
uint64_t min_addr, uint64_t max_addr,
int do_locking);
extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
char *name);
extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
uint64_t max_addr, uint64_t align,
char *name);
extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
char *name);
extern int octeon_bootmem_free_named(char *name);
extern void octeon_bootmem_lock(void);
extern void octeon_bootmem_unlock(void);
extern int octeon_is_simulation(void);
extern int octeon_is_pci_host(void);
extern int octeon_usb_is_ref_clk(void);
extern uint64_t octeon_get_clock_rate(void);
extern const char *octeon_board_type_string(void);
extern const char *octeon_get_pci_interrupts(void);
extern int octeon_get_southbridge_interrupt(void);
extern int octeon_get_boot_coremask(void);
extern int octeon_get_boot_num_arguments(void);
extern const char *octeon_get_boot_argument(int arg);
extern void octeon_hal_setup_reserved32(void);
extern void octeon_user_io_init(void);
struct octeon_cop2_state;
extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state);
extern void octeon_crypto_disable(struct octeon_cop2_state *state,
unsigned long flags);
extern void octeon_init_cvmcount(void);
#define OCTEON_ARGV_MAX_ARGS 64
#define OCTOEN_SERIAL_LEN 20
struct octeon_boot_descriptor {
/* Start of block referenced by assembly code - do not change! */
uint32_t desc_version;
uint32_t desc_size;
uint64_t stack_top;
uint64_t heap_base;
uint64_t heap_end;
/* Only used by bootloader */
uint64_t entry_point;
uint64_t desc_vaddr;
/* End of This block referenced by assembly code - do not change! */
uint32_t exception_base_addr;
uint32_t stack_size;
uint32_t heap_size;
/* Argc count for application. */
uint32_t argc;
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
#define BOOT_FLAG_INIT_CORE (1 << 0)
#define OCTEON_BL_FLAG_DEBUG (1 << 1)
#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2)
/* If set, use uart1 for console */
#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3)
/* If set, use PCI console */
#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4)
/* Call exit on break on serial port */
#define OCTEON_BL_FLAG_BREAK (1 << 5)
uint32_t flags;
uint32_t core_mask;
/* DRAM size in megabyes. */
uint32_t dram_size;
/* physical address of free memory descriptor block. */
uint32_t phy_mem_desc_addr;
/* used to pass flags from app to debugger. */
uint32_t debugger_flags_base_addr;
/* CPU clock speed, in hz. */
uint32_t eclock_hz;
/* DRAM clock speed, in hz. */
uint32_t dclock_hz;
/* SPI4 clock in hz. */
uint32_t spi_clock_hz;
uint16_t board_type;
uint8_t board_rev_major;
uint8_t board_rev_minor;
uint16_t chip_type;
uint8_t chip_rev_major;
uint8_t chip_rev_minor;
char board_serial_number[OCTOEN_SERIAL_LEN];
uint8_t mac_addr_base[6];
uint8_t mac_addr_count;
uint64_t cvmx_desc_vaddr;
};
union octeon_cvmemctl {
uint64_t u64;
struct {
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t tlbbist:1;
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t l1cbist:1;
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t l1dbist:1;
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t dcmbist:1;
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t ptgbist:1;
/* RO 1 = BIST fail, 0 = BIST pass */
uint64_t wbfbist:1;
/* Reserved */
uint64_t reserved:22;
/* R/W If set, marked write-buffer entries time out
* the same as as other entries; if clear, marked
* write-buffer entries use the maximum timeout. */
uint64_t dismarkwblongto:1;
/* R/W If set, a merged store does not clear the
* write-buffer entry timeout state. */
uint64_t dismrgclrwbto:1;
/* R/W Two bits that are the MSBs of the resultant
* CVMSEG LM word location for an IOBDMA. The other 8
* bits come from the SCRADDR field of the IOBDMA. */
uint64_t iobdmascrmsb:2;
/* R/W If set, SYNCWS and SYNCS only order marked
* stores; if clear, SYNCWS and SYNCS only order
* unmarked stores. SYNCWSMARKED has no effect when
* DISSYNCWS is set. */
uint64_t syncwsmarked:1;
/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
* SYNC. */
uint64_t dissyncws:1;
/* R/W If set, no stall happens on write buffer
* full. */
uint64_t diswbfst:1;
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==0 */
uint64_t xkmemenas:1;
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==0 */
uint64_t xkmemenau:1;
/* R/W If set (and SX set), supervisor-level
* loads/stores can use XKPHYS addresses with
* VA<48>==1 */
uint64_t xkioenas:1;
/* R/W If set (and UX set), user-level loads/stores
* can use XKPHYS addresses with VA<48>==1 */
uint64_t xkioenau:1;
/* R/W If set, all stores act as SYNCW (NOMERGE must
* be set when this is set) RW, reset to 0. */
uint64_t allsyncw:1;
/* R/W If set, no stores merge, and all stores reach
* the coherent bus in order. */
uint64_t nomerge:1;
/* R/W Selects the bit in the counter used for DID
* time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
* 214. Actual time-out is between 1x and 2x this
* interval. For example, with DIDTTO=3, expiration
* interval is between 16K and 32K. */
uint64_t didtto:2;
/* R/W If set, the (mem) CSR clock never turns off. */
uint64_t csrckalwys:1;
/* R/W If set, mclk never turns off. */
uint64_t mclkalwys:1;
/* R/W Selects the bit in the counter used for write
* buffer flush time-outs (WBFLT+11) is the bit
* position in an internal counter used to determine
* expiration. The write buffer expires between 1x and
* 2x this interval. For example, with WBFLT = 0, a
* write buffer expires between 2K and 4K cycles after
* the write buffer entry is allocated. */
uint64_t wbfltime:3;
/* R/W If set, do not put Istream in the L2 cache. */
uint64_t istrnol2:1;
/* R/W The write buffer threshold. */
uint64_t wbthresh:4;
/* Reserved */
uint64_t reserved2:2;
/* R/W If set, CVMSEG is available for loads/stores in
* kernel/debug mode. */
uint64_t cvmsegenak:1;
/* R/W If set, CVMSEG is available for loads/stores in
* supervisor mode. */
uint64_t cvmsegenas:1;
/* R/W If set, CVMSEG is available for loads/stores in
* user mode. */
uint64_t cvmsegenau:1;
/* R/W Size of local memory in cache blocks, 54 (6912
* bytes) is max legal value. */
uint64_t lmemsz:6;
} s;
};
struct octeon_cf_data {
unsigned long base_region_bias;
unsigned int base_region; /* The chip select region used by CF */
int is16bit; /* 0 - 8bit, !0 - 16bit */
int dma_engine; /* -1 for no DMA */
};
extern void octeon_write_lcd(const char *s);
extern void octeon_check_cpu_bist(void);
extern int octeon_get_boot_debug_flag(void);
extern int octeon_get_boot_uart(void);
struct uart_port;
extern unsigned int octeon_serial_in(struct uart_port *, int);
extern void octeon_serial_out(struct uart_port *, int, int);
/**
* Write a 32bit value to the Octeon NPI register space
*
* @address: Address to write to
* @val: Value to write
*/
static inline void octeon_npi_write32(uint64_t address, uint32_t val)
{
cvmx_write64_uint32(address ^ 4, val);
cvmx_read64_uint32(address ^ 4);
}
/**
* Read a 32bit value from the Octeon NPI register space
*
* @address: Address to read
* Returns The result
*/
static inline uint32_t octeon_npi_read32(uint64_t address)
{
return cvmx_read64_uint32(address ^ 4);
}
#endif /* __ASM_OCTEON_OCTEON_H */
arch/mips/kernel/octeon_switch.S 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1994, 1995, 1996, by Andreas Busse
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) 2000 MIPS Technologies, Inc.
* written by Carsten Langgaard, carstenl@mips.com
*/
#include <asm/asm.h>
#include <asm/cachectl.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
#include <asm/pgtable-bits.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/thread_info.h>
#include <asm/asmmacro.h>
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
*/
#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti)
*/
.align 7
LEAF(resume)
.set arch=octeon
#ifndef CONFIG_CPU_HAS_LLSC
sw zero, ll_bit
#endif
mfc0 t1, CP0_STATUS
LONG_S t1, THREAD_STATUS(a0)
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
/* check if we need to save COP2 registers */
PTR_L t2, TASK_THREAD_INFO(a0)
LONG_L t0, ST_OFF(t2)
bbit0 t0, 30, 1f
/* Disable COP2 in the stored process state */
li t1, ST0_CU2
xor t0, t1
LONG_S t0, ST_OFF(t2)
/* Enable COP2 so we can save it */
mfc0 t0, CP0_STATUS
or t0, t1
mtc0 t0, CP0_STATUS
/* Save COP2 */
daddu a0, THREAD_CP2
jal octeon_cop2_save
dsubu a0, THREAD_CP2
/* Disable COP2 now that we are done */
mfc0 t0, CP0_STATUS
li t1, ST0_CU2
xor t0, t1
mtc0 t0, CP0_STATUS
1:
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
/* Check if we need to store CVMSEG state */
mfc0 t0, $11,7 /* CvmMemCtl */
bbit0 t0, 6, 3f /* Is user access enabled? */
/* Store the CVMSEG state */
/* Extract the size of CVMSEG */
andi t0, 0x3f
/* Multiply * (cache line size/sizeof(long)/2) */
sll t0, 7-LONGLOG-1
li t1, -32768 /* Base address of CVMSEG */
LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */
synciobdma
2:
.set noreorder
LONG_L t8, 0(t1) /* Load from CVMSEG */
subu t0, 1 /* Decrement loop var */
LONG_L t9, LONGSIZE(t1)/* Load from CVMSEG */
LONG_ADDU t1, LONGSIZE*2 /* Increment loc in CVMSEG */
LONG_S t8, 0(t2) /* Store CVMSEG to thread storage */
LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */
bnez t0, 2b /* Loop until we've copied it all */
LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
.set reorder
/* Disable access to CVMSEG */
mfc0 t0, $11,7 /* CvmMemCtl */
xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */
mtc0 t0, $11,7 /* CvmMemCtl */
#endif
3:
/*
* The order of restoring the registers takes care of the race
* updating $28, $29 and kernelsp without disabling ints.
*/
move $28, a2
cpu_restore_nonscratch a1
#if (_THREAD_SIZE - 32) < 0x8000
PTR_ADDIU t0, $28, _THREAD_SIZE - 32
#else
PTR_LI t0, _THREAD_SIZE - 32
PTR_ADDU t0, $28
#endif
set_saved_sp t0, t1, t2
mfc0 t1, CP0_STATUS /* Do we really need this? */
li a3, 0xff01
and t1, a3
LONG_L a2, THREAD_STATUS(a1)
nor a3, $0, a3
and a2, a3
or a2, t1
mtc0 a2, CP0_STATUS
move v0, a0
jr ra
END(resume)
/*
* void octeon_cop2_save(struct octeon_cop2_state *a0)
*/
.align 7
LEAF(octeon_cop2_save)
dmfc0 t9, $9,7 /* CvmCtl register. */
/* Save the COP2 CRC state */
dmfc2 t0, 0x0201
dmfc2 t1, 0x0202
dmfc2 t2, 0x0200
sd t0, OCTEON_CP2_CRC_IV(a0)
sd t1, OCTEON_CP2_CRC_LENGTH(a0)
sd t2, OCTEON_CP2_CRC_POLY(a0)
/* Skip next instructions if CvmCtl[NODFA_CP2] set */
bbit1 t9, 28, 1f
/* Save the LLM state */
dmfc2 t0, 0x0402
dmfc2 t1, 0x040A
sd t0, OCTEON_CP2_LLM_DAT(a0)
sd t1, OCTEON_CP2_LLM_DAT+8(a0)
1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */
/* Save the COP2 crypto state */
/* this part is mostly common to both pass 1 and later revisions */
dmfc2 t0, 0x0084
dmfc2 t1, 0x0080
dmfc2 t2, 0x0081
dmfc2 t3, 0x0082
sd t0, OCTEON_CP2_3DES_IV(a0)
dmfc2 t0, 0x0088
sd t1, OCTEON_CP2_3DES_KEY(a0)
dmfc2 t1, 0x0111 /* only necessary for pass 1 */
sd t2, OCTEON_CP2_3DES_KEY+8(a0)
dmfc2 t2, 0x0102
sd t3, OCTEON_CP2_3DES_KEY+16(a0)
dmfc2 t3, 0x0103
sd t0, OCTEON_CP2_3DES_RESULT(a0)
dmfc2 t0, 0x0104
sd t1, OCTEON_CP2_AES_INP0(a0) /* only necessary for pass 1 */
dmfc2 t1, 0x0105
sd t2, OCTEON_CP2_AES_IV(a0)
dmfc2 t2, 0x0106
sd t3, OCTEON_CP2_AES_IV+8(a0)
dmfc2 t3, 0x0107
sd t0, OCTEON_CP2_AES_KEY(a0)
dmfc2 t0, 0x0110
sd t1, OCTEON_CP2_AES_KEY+8(a0)
dmfc2 t1, 0x0100
sd t2, OCTEON_CP2_AES_KEY+16(a0)
dmfc2 t2, 0x0101
sd t3, OCTEON_CP2_AES_KEY+24(a0)
mfc0 t3, $15,0 /* Get the processor ID register */
sd t0, OCTEON_CP2_AES_KEYLEN(a0)
li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
sd t1, OCTEON_CP2_AES_RESULT(a0)
sd t2, OCTEON_CP2_AES_RESULT+8(a0)
/* Skip to the Pass1 version of the remainder of the COP2 state */
beq t3, t0, 2f
/* the non-pass1 state when !CvmCtl[NOCRYPTO] */
dmfc2 t1, 0x0240
dmfc2 t2, 0x0241
dmfc2 t3, 0x0242
dmfc2 t0, 0x0243
sd t1, OCTEON_CP2_HSH_DATW(a0)
dmfc2 t1, 0x0244
sd t2, OCTEON_CP2_HSH_DATW+8(a0)
dmfc2 t2, 0x0245
sd t3, OCTEON_CP2_HSH_DATW+16(a0)
dmfc2 t3, 0x0246
sd t0, OCTEON_CP2_HSH_DATW+24(a0)
dmfc2 t0, 0x0247
sd t1, OCTEON_CP2_HSH_DATW+32(a0)
dmfc2 t1, 0x0248
sd t2, OCTEON_CP2_HSH_DATW+40(a0)
dmfc2 t2, 0x0249
sd t3, OCTEON_CP2_HSH_DATW+48(a0)
dmfc2 t3, 0x024A
sd t0, OCTEON_CP2_HSH_DATW+56(a0)
dmfc2 t0, 0x024B
sd t1, OCTEON_CP2_HSH_DATW+64(a0)
dmfc2 t1, 0x024C
sd t2, OCTEON_CP2_HSH_DATW+72(a0)
dmfc2 t2, 0x024D
sd t3, OCTEON_CP2_HSH_DATW+80(a0)
dmfc2 t3, 0x024E
sd t0, OCTEON_CP2_HSH_DATW+88(a0)
dmfc2 t0, 0x0250
sd t1, OCTEON_CP2_HSH_DATW+96(a0)
dmfc2 t1, 0x0251
sd t2, OCTEON_CP2_HSH_DATW+104(a0)
dmfc2 t2, 0x0252
sd t3, OCTEON_CP2_HSH_DATW+112(a0)
dmfc2 t3, 0x0253
sd t0, OCTEON_CP2_HSH_IVW(a0)
dmfc2 t0, 0x0254
sd t1, OCTEON_CP2_HSH_IVW+8(a0)
dmfc2 t1, 0x0255
sd t2, OCTEON_CP2_HSH_IVW+16(a0)
dmfc2 t2, 0x0256
sd t3, OCTEON_CP2_HSH_IVW+24(a0)
dmfc2 t3, 0x0257
sd t0, OCTEON_CP2_HSH_IVW+32(a0)
dmfc2 t0, 0x0258
sd t1, OCTEON_CP2_HSH_IVW+40(a0)
dmfc2 t1, 0x0259
sd t2, OCTEON_CP2_HSH_IVW+48(a0)
dmfc2 t2, 0x025E
sd t3, OCTEON_CP2_HSH_IVW+56(a0)
dmfc2 t3, 0x025A
sd t0, OCTEON_CP2_GFM_MULT(a0)
dmfc2 t0, 0x025B
sd t1, OCTEON_CP2_GFM_MULT+8(a0)
sd t2, OCTEON_CP2_GFM_POLY(a0)
sd t3, OCTEON_CP2_GFM_RESULT(a0)
sd t0, OCTEON_CP2_GFM_RESULT+8(a0)
jr ra
2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
dmfc2 t3, 0x0040
dmfc2 t0, 0x0041
dmfc2 t1, 0x0042
dmfc2 t2, 0x0043
sd t3, OCTEON_CP2_HSH_DATW(a0)
dmfc2 t3, 0x0044
sd t0, OCTEON_CP2_HSH_DATW+8(a0)
dmfc2 t0, 0x0045
sd t1, OCTEON_CP2_HSH_DATW+16(a0)
dmfc2 t1, 0x0046
sd t2, OCTEON_CP2_HSH_DATW+24(a0)
dmfc2 t2, 0x0048
sd t3, OCTEON_CP2_HSH_DATW+32(a0)
dmfc2 t3, 0x0049
sd t0, OCTEON_CP2_HSH_DATW+40(a0)
dmfc2 t0, 0x004A
sd t1, OCTEON_CP2_HSH_DATW+48(a0)
sd t2, OCTEON_CP2_HSH_IVW(a0)
sd t3, OCTEON_CP2_HSH_IVW+8(a0)
sd t0, OCTEON_CP2_HSH_IVW+16(a0)
3: /* pass 1 or CvmCtl[NOCRYPTO] set */
jr ra
END(octeon_cop2_save)
/*
* void octeon_cop2_restore(struct octeon_cop2_state *a0)
*/
.align 7
.set push
.set noreorder
LEAF(octeon_cop2_restore)
/* First cache line was prefetched before the call */
pref 4, 128(a0)
dmfc0 t9, $9,7 /* CvmCtl register. */
pref 4, 256(a0)
ld t0, OCTEON_CP2_CRC_IV(a0)
pref 4, 384(a0)
ld t1, OCTEON_CP2_CRC_LENGTH(a0)
ld t2, OCTEON_CP2_CRC_POLY(a0)
/* Restore the COP2 CRC state */
dmtc2 t0, 0x0201
dmtc2 t1, 0x1202
bbit1 t9, 28, 2f /* Skip LLM if CvmCtl[NODFA_CP2] is set */
dmtc2 t2, 0x4200
/* Restore the LLM state */
ld t0, OCTEON_CP2_LLM_DAT(a0)
ld t1, OCTEON_CP2_LLM_DAT+8(a0)
dmtc2 t0, 0x0402
dmtc2 t1, 0x040A
2:
bbit1 t9, 26, done_restore /* done if CvmCtl[NOCRYPTO] set */
nop
/* Restore the COP2 crypto state common to pass 1 and pass 2 */
ld t0, OCTEON_CP2_3DES_IV(a0)
ld t1, OCTEON_CP2_3DES_KEY(a0)
ld t2, OCTEON_CP2_3DES_KEY+8(a0)
dmtc2 t0, 0x0084
ld t0, OCTEON_CP2_3DES_KEY+16(a0)
dmtc2 t1, 0x0080
ld t1, OCTEON_CP2_3DES_RESULT(a0)
dmtc2 t2, 0x0081
ld t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */
dmtc2 t0, 0x0082
ld t0, OCTEON_CP2_AES_IV(a0)
dmtc2 t1, 0x0098
ld t1, OCTEON_CP2_AES_IV+8(a0)
dmtc2 t2, 0x010A /* only really needed for pass 1 */
ld t2, OCTEON_CP2_AES_KEY(a0)
dmtc2 t0, 0x0102
ld t0, OCTEON_CP2_AES_KEY+8(a0)
dmtc2 t1, 0x0103
ld t1, OCTEON_CP2_AES_KEY+16(a0)
dmtc2 t2, 0x0104
ld t2, OCTEON_CP2_AES_KEY+24(a0)
dmtc2 t0, 0x0105
ld t0, OCTEON_CP2_AES_KEYLEN(a0)
dmtc2 t1, 0x0106
ld t1, OCTEON_CP2_AES_RESULT(a0)
dmtc2 t2, 0x0107
ld t2, OCTEON_CP2_AES_RESULT+8(a0)
mfc0 t3, $15,0 /* Get the processor ID register */
dmtc2 t0, 0x0110
li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
dmtc2 t1, 0x0100
bne t0, t3, 3f /* Skip the next stuff for non-pass1 */
dmtc2 t2, 0x0101
/* this code is specific for pass 1 */
ld t0, OCTEON_CP2_HSH_DATW(a0)
ld t1, OCTEON_CP2_HSH_DATW+8(a0)
ld t2, OCTEON_CP2_HSH_DATW+16(a0)
dmtc2 t0, 0x0040
ld t0, OCTEON_CP2_HSH_DATW+24(a0)
dmtc2 t1, 0x0041
ld t1, OCTEON_CP2_HSH_DATW+32(a0)
dmtc2 t2, 0x0042
ld t2, OCTEON_CP2_HSH_DATW+40(a0)
dmtc2 t0, 0x0043
ld t0, OCTEON_CP2_HSH_DATW+48(a0)
dmtc2 t1, 0x0044
ld t1, OCTEON_CP2_HSH_IVW(a0)
dmtc2 t2, 0x0045
ld t2, OCTEON_CP2_HSH_IVW+8(a0)
dmtc2 t0, 0x0046
ld t0, OCTEON_CP2_HSH_IVW+16(a0)
dmtc2 t1, 0x0048
dmtc2 t2, 0x0049
b done_restore /* unconditional branch */
dmtc2 t0, 0x004A
3: /* this is post-pass1 code */
ld t2, OCTEON_CP2_HSH_DATW(a0)
ld t0, OCTEON_CP2_HSH_DATW+8(a0)
ld t1, OCTEON_CP2_HSH_DATW+16(a0)
dmtc2 t2, 0x0240
ld t2, OCTEON_CP2_HSH_DATW+24(a0)
dmtc2 t0, 0x0241
ld t0, OCTEON_CP2_HSH_DATW+32(a0)
dmtc2 t1, 0x0242
ld t1, OCTEON_CP2_HSH_DATW+40(a0)
dmtc2 t2, 0x0243
ld t2, OCTEON_CP2_HSH_DATW+48(a0)
dmtc2 t0, 0x0244
ld t0, OCTEON_CP2_HSH_DATW+56(a0)
dmtc2 t1, 0x0245
ld t1, OCTEON_CP2_HSH_DATW+64(a0)
dmtc2 t2, 0x0246
ld t2, OCTEON_CP2_HSH_DATW+72(a0)
dmtc2 t0, 0x0247
ld t0, OCTEON_CP2_HSH_DATW+80(a0)
dmtc2 t1, 0x0248
ld t1, OCTEON_CP2_HSH_DATW+88(a0)
dmtc2 t2, 0x0249
ld t2, OCTEON_CP2_HSH_DATW+96(a0)
dmtc2 t0, 0x024A
ld t0, OCTEON_CP2_HSH_DATW+104(a0)
dmtc2 t1, 0x024B
ld t1, OCTEON_CP2_HSH_DATW+112(a0)
dmtc2 t2, 0x024C
ld t2, OCTEON_CP2_HSH_IVW(a0)
dmtc2 t0, 0x024D
ld t0, OCTEON_CP2_HSH_IVW+8(a0)
dmtc2 t1, 0x024E
ld t1, OCTEON_CP2_HSH_IVW+16(a0)
dmtc2 t2, 0x0250
ld t2, OCTEON_CP2_HSH_IVW+24(a0)
dmtc2 t0, 0x0251
ld t0, OCTEON_CP2_HSH_IVW+32(a0)
dmtc2 t1, 0x0252
ld t1, OCTEON_CP2_HSH_IVW+40(a0)
dmtc2 t2, 0x0253
ld t2, OCTEON_CP2_HSH_IVW+48(a0)
dmtc2 t0, 0x0254
ld t0, OCTEON_CP2_HSH_IVW+56(a0)
dmtc2 t1, 0x0255
ld t1, OCTEON_CP2_GFM_MULT(a0)
dmtc2 t2, 0x0256
ld t2, OCTEON_CP2_GFM_MULT+8(a0)
dmtc2 t0, 0x0257
ld t0, OCTEON_CP2_GFM_POLY(a0)
dmtc2 t1, 0x0258
ld t1, OCTEON_CP2_GFM_RESULT(a0)
dmtc2 t2, 0x0259
ld t2, OCTEON_CP2_GFM_RESULT+8(a0)
dmtc2 t0, 0x025E
dmtc2 t1, 0x025A
dmtc2 t2, 0x025B
done_restore:
jr ra
nop
END(octeon_cop2_restore)
.set pop
/*
* void octeon_mult_save()
* sp is assumed to point to a struct pt_regs
*
* NOTE: This is called in SAVE_SOME in stackframe.h. It can only
* safely modify k0 and k1.
*/
.align 7
.set push
.set noreorder
LEAF(octeon_mult_save)
dmfc0 k0, $9,7 /* CvmCtl register. */
bbit1 k0, 27, 1f /* Skip CvmCtl[NOMUL] */
nop
/* Save the multiplier state */
v3mulu k0, $0, $0
v3mulu k1, $0, $0
sd k0, PT_MTP(sp) /* PT_MTP has P0 */
v3mulu k0, $0, $0
sd k1, PT_MTP+8(sp) /* PT_MTP+8 has P1 */
ori k1, $0, 1
v3mulu k1, k1, $0
sd k0, PT_MTP+16(sp) /* PT_MTP+16 has P2 */
v3mulu k0, $0, $0
sd k1, PT_MPL(sp) /* PT_MPL has MPL0 */
v3mulu k1, $0, $0
sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */
jr ra
sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */
1: /* Resume here if CvmCtl[NOMUL] */
jr ra
END(octeon_mult_save)
.set pop
/*
* void octeon_mult_restore()
* sp is assumed to point to a struct pt_regs
*
* NOTE: This is called in RESTORE_SOME in stackframe.h.
*/
.align 7
.set push
.set noreorder
LEAF(octeon_mult_restore)
dmfc0 k1, $9,7 /* CvmCtl register. */
ld v0, PT_MPL(sp) /* MPL0 */
ld v1, PT_MPL+8(sp) /* MPL1 */
ld k0, PT_MPL+16(sp) /* MPL2 */
bbit1 k1, 27, 1f /* Skip CvmCtl[NOMUL] */
/* Normally falls through, so no time wasted here */
nop
/* Restore the multiplier state */
ld k1, PT_MTP+16(sp) /* P2 */
MTM0 v0 /* MPL0 */
ld v0, PT_MTP+8(sp) /* P1 */
MTM1 v1 /* MPL1 */
ld v1, PT_MTP(sp) /* P0 */
MTM2 k0 /* MPL2 */
MTP2 k1 /* P2 */
MTP1 v0 /* P1 */
jr ra
MTP0 v1 /* P0 */
1: /* Resume here if CvmCtl[NOMUL] */
jr ra
nop
END(octeon_mult_restore)
.set pop
arch/mips/mm/c-octeon.c 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2005-2007 Cavium Networks
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
#include <linux/io.h>
#include <asm/bcache.h>
#include <asm/bootinfo.h>
#include <asm/cacheops.h>
#include <asm/cpu-features.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/r4kcache.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/war.h>
#include <asm/octeon/octeon.h>
unsigned long long cache_err_dcache[NR_CPUS];
/**
* Octeon automatically flushes the dcache on tlb changes, so
* from Linux's viewpoint it acts much like a physically
* tagged cache. No flushing is needed
*
*/
static void octeon_flush_data_cache_page(unsigned long addr)
{
/* Nothing to do */
}
static inline void octeon_local_flush_icache(void)
{
asm volatile ("synci 0($0)");
}
/*
* Flush local I-cache for the specified range.
*/
static void local_octeon_flush_icache_range(unsigned long start,
unsigned long end)
{
octeon_local_flush_icache();
}
/**
* Flush caches as necessary for all cores affected by a
* vma. If no vma is supplied, all cores are flushed.
*
* @vma: VMA to flush or NULL to flush all icaches.
*/
static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
{
extern void octeon_send_ipi_single(int cpu, unsigned int action);
#ifdef CONFIG_SMP
int cpu;
cpumask_t mask;
#endif
mb();
octeon_local_flush_icache();
#ifdef CONFIG_SMP
preempt_disable();
cpu = smp_processor_id();
/*
* If we have a vma structure, we only need to worry about
* cores it has been used on
*/
if (vma)
mask = vma->vm_mm->cpu_vm_mask;
else
mask = cpu_online_map;
cpu_clear(cpu, mask);
for_each_cpu_mask(cpu, mask)
octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
preempt_enable();
#endif
}
/**
* Called to flush the icache on all cores
*/
static void octeon_flush_icache_all(void)
{
octeon_flush_icache_all_cores(NULL);
}
/**
* Called to flush all memory associated with a memory
* context.
*
* @mm: Memory context to flush
*/
static void octeon_flush_cache_mm(struct mm_struct *mm)
{
/*
* According to the R4K version of this file, CPUs without
* dcache aliases don't need to do anything here
*/
}
/**
* Flush a range of kernel addresses out of the icache
*
*/
static void octeon_flush_icache_range(unsigned long start, unsigned long end)
{
octeon_flush_icache_all_cores(NULL);
}
/**
* Flush the icache for a trampoline. These are used for interrupt
* and exception hooking.
*
* @addr: Address to flush
*/
static void octeon_flush_cache_sigtramp(unsigned long addr)
{
struct vm_area_struct *vma;
vma = find_vma(current->mm, addr);
octeon_flush_icache_all_cores(vma);
}
/**
* Flush a range out of a vma
*
* @vma: VMA to flush
* @start:
* @end:
*/
static void octeon_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
if (vma->vm_flags & VM_EXEC)
octeon_flush_icache_all_cores(vma);
}
/**
* Flush a specific page of a vma
*
* @vma: VMA to flush page for
* @page: Page to flush
* @pfn:
*/
static void octeon_flush_cache_page(struct vm_area_struct *vma,
unsigned long page, unsigned long pfn)
{
if (vma->vm_flags & VM_EXEC)
octeon_flush_icache_all_cores(vma);
}
/**
* Probe Octeon's caches
*
*/
static void __devinit probe_octeon(void)
{
unsigned long icache_size;
unsigned long dcache_size;
unsigned int config1;
struct cpuinfo_mips *c = &current_cpu_data;
switch (c->cputype) {
case CPU_CAVIUM_OCTEON:
config1 = read_c0_config1();
c->icache.linesz = 2 << ((config1 >> 19) & 7);
c->icache.sets = 64 << ((config1 >> 22) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
c->icache.flags |= MIPS_CACHE_VTAG;
icache_size =
c->icache.sets * c->icache.ways * c->icache.linesz;
c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
c->dcache.linesz = 128;
if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
c->dcache.sets = 1; /* CN3XXX has one Dcache set */
else
c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
c->dcache.ways = 64;
dcache_size =
c->dcache.sets * c->dcache.ways * c->dcache.linesz;
c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1;
c->options |= MIPS_CPU_PREFETCH;
break;
default:
panic("Unsupported Cavium Networks CPU type\n");
break;
}
/* compute a couple of other cache variables */
c->icache.waysize = icache_size / c->icache.ways;
c->dcache.waysize = dcache_size / c->dcache.ways;
c->icache.sets = icache_size / (c->icache.linesz * c->icache.ways);
c->dcache.sets = dcache_size / (c->dcache.linesz * c->dcache.ways);
if (smp_processor_id() == 0) {
pr_notice("Primary instruction cache %ldkB, %s, %d way, "
"%d sets, linesize %d bytes.\n",
icache_size >> 10,
cpu_has_vtag_icache ?
"virtually tagged" : "physically tagged",
c->icache.ways, c->icache.sets, c->icache.linesz);
pr_notice("Primary data cache %ldkB, %d-way, %d sets, "
"linesize %d bytes.\n",
dcache_size >> 10, c->dcache.ways,
c->dcache.sets, c->dcache.linesz);
}
}
/**
* Setup the Octeon cache flush routines
*
*/
void __devinit octeon_cache_init(void)
{
extern unsigned long ebase;
extern char except_vec2_octeon;
memcpy((void *)(ebase + 0x100), &except_vec2_octeon, 0x80);
octeon_flush_cache_sigtramp(ebase + 0x100);
probe_octeon();
shm_align_mask = PAGE_SIZE - 1;
flush_cache_all = octeon_flush_icache_all;
__flush_cache_all = octeon_flush_icache_all;
flush_cache_mm = octeon_flush_cache_mm;
flush_cache_page = octeon_flush_cache_page;
flush_cache_range = octeon_flush_cache_range;
flush_cache_sigtramp = octeon_flush_cache_sigtramp;
flush_icache_all = octeon_flush_icache_all;
flush_data_cache_page = octeon_flush_data_cache_page;
flush_icache_range = octeon_flush_icache_range;
local_flush_icache_range = local_octeon_flush_icache_range;
build_clear_page();
build_copy_page();
}
/**
* Handle a cache error exception
*/
static void cache_parity_error_octeon(int non_recoverable)
{
unsigned long coreid = cvmx_get_core_num();
uint64_t icache_err = read_octeon_c0_icacheerr();
pr_err("Cache error exception:\n");
pr_err("cp0_errorepc == %lx\n", read_c0_errorepc());
if (icache_err & 1) {
pr_err("CacheErr (Icache) == %llx\n",
(unsigned long long)icache_err);
write_octeon_c0_icacheerr(0);
}
if (cache_err_dcache[coreid] & 1) {
pr_err("CacheErr (Dcache) == %llx\n",
(unsigned long long)cache_err_dcache[coreid]);
cache_err_dcache[coreid] = 0;
}
if (non_recoverable)
panic("Can't handle cache error: nested exception");
}
/**
* Called when the the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
{
cache_parity_error_octeon(0);
}
/**
* Called when the the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
{
cache_parity_error_octeon(1);
}
arch/mips/mm/cex-oct.S 0 → 100644
浏览文件 @ 5b3b1688
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Cavium Networks
* Cache error handler
*/
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
/*
* Handle cache error. Indicate to the second level handler whether
* the exception is recoverable.
*/
LEAF(except_vec2_octeon)
.set push
.set mips64r2
.set noreorder
.set noat
/* due to an errata we need to read the COP0 CacheErr (Dcache)
* before any cache/DRAM access */
rdhwr k0, $0 /* get core_id */
PTR_LA k1, cache_err_dcache
sll k0, k0, 3
PTR_ADDU k1, k0, k1 /* k1 = &cache_err_dcache[core_id] */
dmfc0 k0, CP0_CACHEERR, 1
sd k0, (k1)
dmtc0 $0, CP0_CACHEERR, 1
/* check whether this is a nested exception */
mfc0 k1, CP0_STATUS
andi k1, k1, ST0_EXL
beqz k1, 1f
nop
j cache_parity_error_octeon_non_recoverable
nop
/* exception is recoverable */
1: j handle_cache_err
nop
.set pop
END(except_vec2_octeon)
/* We need to jump to handle_cache_err so that the previous handler
* can fit within 0x80 bytes. We also move from 0xFFFFFFFFAXXXXXXX
* space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached). */
LEAF(handle_cache_err)
.set push
.set noreorder
.set noat
SAVE_ALL
KMODE
jal cache_parity_error_octeon_recoverable
nop
j ret_from_exception
nop
.set pop
END(handle_cache_err)
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或