Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

Documentation/blackfin/kgdb.txt

-			A Simple Guide to Configure KGDB
-
-			Sonic Zhang <sonic.zhang@analog.com>
-				Aug. 24th 2006
-
-
-This KGDB patch enables the kernel developer to do source level debugging on
-the kernel for the Blackfin architecture.  The debugging works over either the
-ethernet interface or one of the uarts.  Both software breakpoints and
-hardware breakpoints are supported in this version.
-http://docs.blackfin.uclinux.org/doku.php?id=kgdb
-
-
-2 known issues:
-1. This bug:
-       http://blackfin.uclinux.org/tracker/index.php?func=detail&aid=544&group_id=18&atid=145
-   The GDB client for Blackfin uClinux causes incorrect values of local
-   variables to be displayed when the user breaks the running of kernel in GDB.
-2. Because of a hardware bug in Blackfin 533 v1.0.3:
-       05000067 - Watchpoints (Hardware Breakpoints) are not supported
-   Hardware breakpoints cannot be set properly.
-
-
-Debug over Ethernet:
- 
-1. Compile and install the cross platform version of gdb for blackfin, which
-   can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel.  Select the menuconfig option under
-   "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
-   With this selected, option "Full Symbolic/Source Debugging support" and 
-   "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over (Ethernet)".  Add "kgdboe=@target-IP/,@host-IP/" to
-   the option "Compiled-in Kernel Boot Parameter" under "Kernel hacking".
-
-4. Connect minicom to the serial port and boot the kernel image.
-
-5. Configure the IP "/> ifconfig eth0 target-IP"
-
-6. Start GDB client "bfin-elf-gdb vmlinux".
-
-7. Connect to the target "(gdb) target remote udp:target-IP:6443".
-
-8. Set software breakpoint "(gdb) break sys_open".
-
-9. Continue "(gdb) c".
-
-10. Run ls in the target console "/> ls".
-
-11. Breakpoint hits. "Breakpoint 1: sys_open(..."
-
-12. Display local variables and function paramters.
-    (*) This operation gives wrong results, see known issue 1.
-
-13. Single stepping "(gdb) si".
-
-14. Remove breakpoint 1. "(gdb) del 1"
-
-15. Set hardware breakpoint "(gdb) hbreak sys_open".
-
-16. Continue "(gdb) c".
-
-17. Run ls in the target console "/> ls".
-
-18. Hardware breakpoint hits. "Breakpoint 1: sys_open(...".
-    (*) This hardware breakpoint will not be hit, see known issue 2.
-
-19. Continue "(gdb) c".
-
-20. Interrupt the target in GDB "Ctrl+C".
-
-21. Detach from the target "(gdb) detach".
-
-22. Exit GDB "(gdb) quit".
-
-
-Debug over the UART:
-
-1. Compile and install the cross platform version of gdb for blackfin, which
-   can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel.  Select the menuconfig option under
-   "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
-   With this selected, option "Full Symbolic/Source Debugging support" and 
-   "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over (UART)".  Set "KGDB: UART port number" to be
-   a different one from the console.  Don't forget to change the mode of
-   blackfin serial driver to PIO.  Otherwise kgdb works incorrectly on UART.
- 
-4. If you want connect to kgdb when the kernel boots, enable
-   "KGDB: Wait for gdb connection early" 
-
-5. Compile kernel.
-
-6. Connect minicom to the serial port of the console and boot the kernel image.
-
-7. Start GDB client "bfin-elf-gdb vmlinux".
-
-8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
-
-9. Connect to the target on the second serial port "(gdb) target remote /dev/ttyS1".
-
-10. Set software breakpoint "(gdb) break sys_open".
-
-11. Continue "(gdb) c". 
-
-12. Run ls in the target console "/> ls". 
-
-13. A breakpoint is hit. "Breakpoint 1: sys_open(..."
-
-14. All other operations are the same as that in KGDB over Ethernet. 
-
-
-Debug over the same UART as console:
-
-1. Compile and install the cross platform version of gdb for blackfin, which
-   can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel.  Select the menuconfig option under
-   "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
-   With this selected, option "Full Symbolic/Source Debugging support" and 
-   "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over UART".  Set "KGDB: UART port number" to console.
-   Don't forget to change the mode of blackfin serial driver to PIO.
-   Otherwise kgdb works incorrectly on UART.
- 
-4. If you want connect to kgdb when the kernel boots, enable
-   "KGDB: Wait for gdb connection early" 
-
-5. Connect minicom to the serial port and boot the kernel image. 
-
-6. (Optional) Ask target to wait for gdb connection by entering Ctrl+A. In minicom, you should enter Ctrl+A+A.
-
-7. Start GDB client "bfin-elf-gdb vmlinux".
-
-8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
-
-9. Connect to the target "(gdb) target remote /dev/ttyS0".
-
-10. Set software breakpoint "(gdb) break sys_open".
-
-11. Continue "(gdb) c". Then enter Ctrl+C twice to stop GDB connection.
-
-12. Run ls in the target console "/> ls". Dummy string can be seen on the console.
-
-13. Then connect the gdb to target again. "(gdb) target remote /dev/ttyS0".
-    Now you will find a breakpoint is hit. "Breakpoint 1: sys_open(..."
-
-14. All other operations are the same as that in KGDB over Ethernet.  The only
-    difference is that after continue command in GDB, please stop GDB
-    connection by 2 "Ctrl+C"s and connect again after breakpoints are hit or
-    Ctrl+A is entered.

arch/blackfin/Kconfig

@@ -162,16 +162,28 @@ config BF549
 config BF561
 	bool "BF561"
 	help
-	  Not Supported Yet - Work in progress - BF561 Processor Support.
+	  BF561 Processor Support.
 
 endchoice
 
+config BF_REV_MIN
+	int
+	default 0 if (BF52x || BF54x)
+	default 2 if (BF537 || BF536 || BF534)
+	default 3 if (BF561 ||BF533 || BF532 || BF531)
+
+config BF_REV_MAX
+	int
+	default 2 if (BF52x || BF54x)
+	default 3 if (BF537 || BF536 || BF534)
+	default 5 if (BF561)
+	default 6 if (BF533 || BF532 || BF531)
+
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if BF527
-	default BF_REV_0_2 if BF537
-	default BF_REV_0_3 if BF533
-	default BF_REV_0_0 if BF549
+	default BF_REV_0_1 if (BF52x || BF54x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
@@ -183,7 +195,7 @@ config BF_REV_0_1
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF537 || BF536 || BF534)
+	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
 
 config BF_REV_0_3
 	bool "0.3"
@@ -197,6 +209,10 @@ config BF_REV_0_5
 	bool "0.5"
 	depends on (BF561 || BF533 || BF532 || BF531)
 
+config BF_REV_0_6
+	bool "0.6"
+	depends on (BF533 || BF532 || BF531)
+
 config BF_REV_ANY
 	bool "any"
 
@@ -249,7 +265,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
 	default y
 
 source "arch/blackfin/mach-bf527/Kconfig"
@@ -286,13 +302,20 @@ config BOOT_LOAD
 	  memory region is used to capture NULL pointer references as well
 	  as some core kernel functions.
 
+config ROM_BASE
+	hex "Kernel ROM Base"
+	default "0x20040000"
+	range 0x20000000 0x20400000 if !(BF54x || BF561)
+	range 0x20000000 0x30000000 if (BF54x || BF561)
+	help
+
 comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -332,7 +355,7 @@ config VCO_MULT
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -368,14 +391,6 @@ config SCLK_DIV
 	  This can be between 1 and 15
 	  System Clock = (PLL frequency) / (this setting)
 
-config MAX_MEM_SIZE
-	int "Max SDRAM Memory Size in MBytes"
-	depends on !MPU
-	default 512
-	help
-	  This is the max memory size that the kernel will create CPLB
-	  tables for.  Your system will not be able to handle any more.
-
 choice
 	prompt "DDR SDRAM Chip Type"
 	depends on BFIN_KERNEL_CLOCK
@@ -389,6 +404,14 @@ config MEM_MT46V32M16_5B
 	bool "MT46V32M16_5B"
 endchoice
 
+config MAX_MEM_SIZE
+	int "Max SDRAM Memory Size in MBytes"
+	depends on !MPU
+	default 512
+	help
+	  This is the max memory size that the kernel will create CPLB
+	  tables for.  Your system will not be able to handle any more.
+
 #
 # Max & Min Speeds for various Chips
 #
@@ -455,8 +478,6 @@ config CYCLES_CLOCKSOURCE
 
 source kernel/time/Kconfig
 
-comment "Memory Setup"
-
 comment "Misc"
 
 choice
@@ -622,6 +643,15 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+config APP_STACK_L1
+	bool "Support locating application stack in L1 Scratch Memory"
+	default y
+	help
+	  If enabled the application stack can be located in L1
+	  scratch memory (less latency).
+
+	  Currently only works with FLAT binaries.
+
 comment "Speed Optimizations"
 config BFIN_INS_LOWOVERHEAD
 	bool "ins[bwl] low overhead, higher interrupt latency"
@@ -755,6 +785,13 @@ config BFIN_WT
 
 endchoice
 
+config BFIN_L2_CACHEABLE
+	bool "Cache L2 SRAM"
+	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
+	default n
+	help
+	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n

arch/blackfin/Kconfig.debug

@@ -2,6 +2,22 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config HAVE_ARCH_KGDB
+       def_bool y
+
+config DEBUG_VERBOSE
+	bool "Verbose fault messages"
+	default y
+	select PRINTK
+	help
+	  When a program crashes due to an exception, or the kernel detects
+	  an internal error, the kernel can print a not so brief message
+	  explaining what the problem was. This debugging information is
+	  useful to developers and kernel hackers when tracking down problems,
+	  but mostly meaningless to other people. This is always helpful for
+	  debugging but serves no purpose on a production system.
+	  Most people should say N here.
+
 config DEBUG_MMRS
 	bool "Generate Blackfin MMR tree"
 	select DEBUG_FS
@@ -22,6 +38,44 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config DEBUG_DOUBLEFAULT
+	bool "Debug Double Faults"
+	default n
+	help
+	  If an exception is caused while executing code within the exception
+	  handler, the NMI handler, the reset vector, or in emulator mode,
+	  a double fault occurs. On the Blackfin, this is a unrecoverable
+	  event. You have two options:
+	  - RESET exactly when double fault occurs. The excepting
+	    instruction address is stored in RETX, where the next kernel
+	    boot will print it out.
+	  - Print debug message. This is much more error prone, although
+	    easier to handle. It is error prone since:
+	    - The excepting instruction is not committed.
+	    - All writebacks from the instruction are prevented.
+	    - The generated exception is not taken.
+	    - The EXCAUSE field is updated with an unrecoverable event
+	    The only way to check this is to see if EXCAUSE contains the
+	    unrecoverable event value at every exception return. By selecting
+	    this option, you are skipping over the faulting instruction, and 
+	    hoping things stay together enough to print out a debug message.
+
+	  This does add a little kernel code, but is the only method to debug
+	  double faults - if unsure say "Y"
+
+choice
+	prompt "Double Fault Failure Method"
+	default DEBUG_DOUBLEFAULT_PRINT
+	depends on DEBUG_DOUBLEFAULT
+
+config DEBUG_DOUBLEFAULT_PRINT
+	bool "Print"
+
+config DEBUG_DOUBLEFAULT_RESET
+	bool "Reset"
+
+endchoice
+
 config DEBUG_ICACHE_CHECK
 	bool "Check Instruction cache coherency"
 	depends on DEBUG_KERNEL
@@ -143,6 +197,7 @@ config DEBUG_BFIN_NO_KERN_HWTRACE
 config EARLY_PRINTK
 	bool "Early printk" 
 	default n
+	select SERIAL_CORE_CONSOLE
 	help
 	  This option enables special console drivers which allow the kernel
 	  to print messages very early in the bootup process.

arch/blackfin/Makefile

@@ -67,6 +67,7 @@ rev-$(CONFIG_BF_REV_0_2)  := 0.2
 rev-$(CONFIG_BF_REV_0_3)  := 0.3
 rev-$(CONFIG_BF_REV_0_4)  := 0.4
 rev-$(CONFIG_BF_REV_0_5)  := 0.5
+rev-$(CONFIG_BF_REV_0_6)  := 0.6
 rev-$(CONFIG_BF_REV_NONE) := none
 rev-$(CONFIG_BF_REV_ANY)  := any
 

arch/blackfin/configs/H8606_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.14
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -192,7 +192,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=400000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
@@ -516,7 +516,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -635,25 +635,25 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -681,7 +681,15 @@ CONFIG_BFIN_TIMER_LATENCY=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support

arch/blackfin/include/asm/bfin-global.h

@@ -63,7 +63,6 @@ extern void bfin_dcache_init(void);
 extern void init_exception_vectors(void);
 extern void program_IAR(void);
 
-extern void bfin_reset(void);
 extern asmlinkage void lower_to_irq14(void);
 extern asmlinkage void bfin_return_from_exception(void);
 extern asmlinkage void evt14_softirq(void);
@@ -92,6 +91,8 @@ extern int sram_free(const void*);
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
+extern void *isram_memcpy(void *dest, const void *src, size_t n);
+
 extern const char bfin_board_name[];
 
 extern unsigned long bfin_sic_iwr[];
@@ -104,7 +105,7 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
 	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
 	_ebss_l2[], _l2_lma_start[];
 
-/* only used when CONFIG_MTD_UCLINUX */
+/* only used when MTD_UCLINUX */
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK

arch/blackfin/include/asm/bfrom.h

+/* Blackfin on-chip ROM API
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFROM_H__
+#define __BFROM_H__
+
+#include <linux/types.h>
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ        0x00000000    /* read registers */
+#define SYSCTRL_WRITE       0x00000001    /* write registers */
+#define SYSCTRL_SYSRESET    0x00000002    /* perform system reset */
+#define SYSCTRL_CORERESET   0x00000004    /* perform core reset */
+#define SYSCTRL_SOFTRESET   0x00000006    /* perform core and system reset */
+#define SYSCTRL_VRCTL       0x00000010    /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE  0x00000020    /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE  0x00000000    /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE  0x00000040    /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL      0x00000100    /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV      0x00000200    /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT     0x00000400    /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT     0x00000800    /* read/write PLL_STAT register */
+
+typedef struct ADI_SYSCTRL_VALUES {
+	uint16_t uwVrCtl;
+	uint16_t uwPllCtl;
+	uint16_t uwPllDiv;
+	uint16_t uwPllLockCnt;
+	uint16_t uwPllStat;
+} ADI_SYSCTRL_VALUES;
+
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)0xEF000038;
+
+/* We need a dedicated function since we need to screw with the stack pointer
+ * when resetting.  The on-chip ROM will save/restore registers on the stack
+ * when doing a system reset, so the stack cannot be outside of the chip.
+ */
+__attribute__((__noreturn__))
+static inline void bfrom_SoftReset(void *new_stack)
+{
+	while (1)
+		__asm__ __volatile__(
+			"sp = %[stack];"
+			"jump (%[bfrom_syscontrol]);"
+			: : [bfrom_syscontrol] "p"(bfrom_SysControl),
+				"q0"(SYSCTRL_SOFTRESET),
+				"q1"(0),
+				"q2"(NULL),
+				[stack] "p"(new_stack)
+		);
+}
+
+/* OTP Functions */
+static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)0xEF000018;
+static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001A;
+static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001C;
+
+/* otp command: defines for "command" */
+#define OTP_INIT                 0x00000001
+#define OTP_CLOSE                0x00000002
+
+/* otp read/write: defines for "flags" */
+#define OTP_LOWER_HALF           0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF           0x00000001
+#define OTP_NO_ECC               0x00000010 /* do not use ECC */
+#define OTP_LOCK                 0x00000020 /* sets page protection bit for page */
+#define OTP_CHECK_FOR_PREV_WRITE 0x00000080
+
+/* Return values for all functions */
+#define OTP_SUCCESS          0x00000000
+#define OTP_MASTER_ERROR     0x001
+#define OTP_WRITE_ERROR      0x003
+#define OTP_READ_ERROR       0x005
+#define OTP_ACC_VIO_ERROR    0x009
+#define OTP_DATA_MULT_ERROR  0x011
+#define OTP_ECC_MULT_ERROR   0x021
+#define OTP_PREV_WR_ERROR    0x041
+#define OTP_DATA_SB_WARN     0x100
+#define OTP_ECC_SB_WARN      0x200
+
+#endif

arch/blackfin/include/asm/cacheflush.h

@@ -30,8 +30,6 @@
 #ifndef _BLACKFIN_CACHEFLUSH_H
 #define _BLACKFIN_CACHEFLUSH_H
 
-#include <asm/cplb.h>
-
 extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int);
 extern void blackfin_icache_flush_range(unsigned int, unsigned int);
 extern void blackfin_dcache_flush_range(unsigned int, unsigned int);

arch/blackfin/include/asm/cplb.h

@@ -55,7 +55,13 @@
 #endif
 
 #define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
-#define L2_MEMORY        (CPLB_COMMON)
+#ifdef CONFIG_BFIN_L2_CACHEABLE
+#define L2_IMEMORY        (SDRAM_IGENERIC)
+#define L2_DMEMORY        (SDRAM_DGENERIC)
+#else
+#define L2_IMEMORY        (CPLB_COMMON)
+#define L2_DMEMORY        (CPLB_COMMON)
+#endif
 #define SDRAM_DNON_CHBL  (CPLB_COMMON)
 #define SDRAM_EBIU       (CPLB_COMMON)
 #define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)

arch/blackfin/include/asm/cplbinit.h

@@ -90,6 +90,20 @@ extern u_long dpdt_swapcount_table[];
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
-extern void generate_cpl_tables(void);
+extern void generate_cplb_tables(void);
+
+static inline int bfin_addr_dcachable(unsigned long addr)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	if (addr < (_ramend - DMA_UNCACHED_REGION))
+		return 1;
+#endif
+
+	if (reserved_mem_dcache_on &&
+		addr >= _ramend && addr < physical_mem_end)
+		return 1;
+
+	return 0;
+}
 
 #endif

arch/blackfin/include/asm/cpumask.h

-#ifndef _ASM_BLACKFIN_CPUMASK_H
-#define _ASM_BLACKFIN_CPUMASK_H
-
-#include <asm-generic/cpumask.h>
-
-#endif				/* _ASM_BLACKFIN_CPUMASK_H */

arch/blackfin/include/asm/dma-mapping.h

@@ -80,4 +80,15 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 		      int nhwentries, enum dma_data_direction direction);
 
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					dma_addr_t handle, size_t size,
+					enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					dma_addr_t handle, size_t size,
+					enum dma_data_direction dir)
+{
+}
 #endif				/* _BLACKFIN_DMA_MAPPING_H */

arch/blackfin/include/asm/kgdb.h

@@ -124,9 +124,16 @@ enum regnames {
 /* Number of bytes of registers.  */
 #define NUMREGBYTES BFIN_NUM_REGS*4
 
-#define BREAKPOINT() asm("   EXCPT 2;");
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("   EXCPT 2;");
+}
 #define BREAK_INSTR_SIZE	2
-#define HW_BREAKPOINT_NUM		6
+#define CACHE_FLUSH_IS_SAFE	1
+#define HW_INST_WATCHPOINT_NUM	6
+#define HW_WATCHPOINT_NUM	8
+#define TYPE_INST_WATCHPOINT	0
+#define TYPE_DATA_WATCHPOINT	1
 
 /* Instruction watchpoint address control register bits mask */
 #define WPPWR		0x1
@@ -163,10 +170,11 @@ enum regnames {
 #define WPDAEN1		0x8
 #define WPDCNTEN0	0x10
 #define WPDCNTEN1	0x20
+
 #define WPDSRC0		0xc0
-#define WPDACC0		0x300
+#define WPDACC0_OFFSET	8
 #define WPDSRC1		0xc00
-#define WPDACC1		0x3000
+#define WPDACC1_OFFSET	12
 
 /* Watchpoint status register bits mask */
 #define STATIA0		0x1
@@ -178,7 +186,4 @@ enum regnames {
 #define STATDA0		0x40
 #define STATDA1		0x80
 
-extern void kgdb_print(const char *fmt, ...);
-extern void init_kgdb_uart(void);
-
 #endif

arch/blackfin/include/asm/mmu_context.h

@@ -45,49 +45,12 @@ extern unsigned long l1_stack_len;
 extern int l1sram_free(const void*);
 extern void *l1sram_alloc_max(void*);
 
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/* Called when creating a new context during fork() or execve().  */
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-#ifdef CONFIG_MPU
-	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
-	mm->context.page_rwx_mask = (unsigned long *)p;
-	memset(mm->context.page_rwx_mask, 0,
-	       page_mask_nelts * 3 * sizeof(long));
-#endif
-	return 0;
-}
-
 static inline void free_l1stack(void)
 {
 	nr_l1stack_tasks--;
 	if (nr_l1stack_tasks == 0)
 		l1sram_free(l1_stack_base);
 }
-static inline void destroy_context(struct mm_struct *mm)
-{
-	struct sram_list_struct *tmp;
-
-	if (current_l1_stack_save == mm->context.l1_stack_save)
-		current_l1_stack_save = NULL;
-	if (mm->context.l1_stack_save)
-		free_l1stack();
-
-	while ((tmp = mm->context.sram_list)) {
-		mm->context.sram_list = tmp->next;
-		sram_free(tmp->addr);
-		kfree(tmp);
-	}
-#ifdef CONFIG_MPU
-	if (current_rwx_mask == mm->context.page_rwx_mask)
-		current_rwx_mask = NULL;
-	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
-#endif
-}
 
 static inline unsigned long
 alloc_l1stack(unsigned long length, unsigned long *stack_base)
@@ -134,6 +97,7 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m
 	}
 #endif
 
+#ifdef CONFIG_APP_STACK_L1
 	/* L1 stack switching.  */
 	if (!next_mm->context.l1_stack_save)
 		return;
@@ -144,6 +108,7 @@ static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_m
 	}
 	current_l1_stack_save = next_mm->context.l1_stack_save;
 	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+#endif
 }
 
 #ifdef CONFIG_MPU
@@ -180,4 +145,44 @@ static inline void update_protections(struct mm_struct *mm)
 }
 #endif
 
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve().  */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+	mm->context.page_rwx_mask = (unsigned long *)p;
+	memset(mm->context.page_rwx_mask, 0,
+	       page_mask_nelts * 3 * sizeof(long));
+#endif
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+	struct sram_list_struct *tmp;
+
+#ifdef CONFIG_APP_STACK_L1
+	if (current_l1_stack_save == mm->context.l1_stack_save)
+		current_l1_stack_save = 0;
+	if (mm->context.l1_stack_save)
+		free_l1stack();
+#endif
+
+	while ((tmp = mm->context.sram_list)) {
+		mm->context.sram_list = tmp->next;
+		sram_free(tmp->addr);
+		kfree(tmp);
+	}
+#ifdef CONFIG_MPU
+	if (current_rwx_mask == mm->context.page_rwx_mask)
+		current_rwx_mask = NULL;
+	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
 #endif

arch/blackfin/include/asm/processor.h

@@ -134,6 +134,12 @@ static inline uint32_t __pure bfin_revid(void)
 	return revid;
 }
 
+static inline uint16_t __pure bfin_cpuid(void)
+{
+	return (bfin_read_CHIPID() & CHIPID_FAMILY) >> 12;
+
+}
+
 static inline uint32_t __pure bfin_compiled_revid(void)
 {
 #if defined(CONFIG_BF_REV_0_0)

arch/blackfin/include/asm/ptrace.h

@@ -158,6 +158,8 @@ extern void show_regs(struct pt_regs *);
 #define PT_SEQSTAT 8
 #define PT_IPEND 4
 
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
 #define PT_SYSCFG 216
 #define PT_TEXT_ADDR 220
 #define PT_TEXT_END_ADDR 224

arch/blackfin/include/asm/traps.h

@@ -59,6 +59,9 @@
 	level "   or a 16-bit register is accessed with a 32-bit instruction.\n"
 #define HWC_x3(level) \
 	"External Memory Addressing Error\n"
+#define EXC_0x04(level) \
+	"Unimplmented exception occured\n" \
+	level " - Maybe you forgot to install a custom exception handler?\n"
 #define HWC_x12(level) \
 	"Performance Monitor Overflow\n"
 #define HWC_x18(level) \
@@ -84,7 +87,7 @@
 	level "   a particular processor implementation.\n"
 #define EXC_0x22(level) \
 	"Illegal instruction combination\n" \
-	level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \
+	level " - See section for multi-issue rules in the Blackfin\n" \
 	level "   Processor Instruction Set Reference.\n"
 #define EXC_0x23(level) \
 	"Data access CPLB protection violation\n" \

arch/blackfin/kernel/asm-offsets.c

@@ -60,6 +60,7 @@ int main(void)
 	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
 
 	/* offsets into the pt_regs */
+	DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
 	DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
 	DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
 	DEFINE(PT_R0, offsetof(struct pt_regs, r0));

arch/blackfin/kernel/bfin_gpio.c

@@ -231,14 +231,14 @@ inline int check_gpio(unsigned gpio)
 }
 #endif
 
-void gpio_error(unsigned gpio)
+static void gpio_error(unsigned gpio)
 {
 	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
 }
 
 static void set_label(unsigned short ident, const char *label)
 {
-	if (label && str_ident) {
+	if (label) {
 		strncpy(str_ident[ident].name, label,
 			 RESOURCE_LABEL_SIZE);
 		str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
@@ -247,9 +247,6 @@ static void set_label(unsigned short ident, const char *label)
 
 static char *get_label(unsigned short ident)
 {
-	if (!str_ident)
-		return "UNKNOWN";
-
 	return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
 }
 
@@ -260,7 +257,7 @@ static int cmp_label(unsigned short ident, const char *label)
 		printk(KERN_ERR "Please provide none-null label\n");
 	}
 
-	if (label && str_ident)
+	if (label)
 		return strncmp(str_ident[ident].name,
 				 label, strlen(label));
 	else

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -36,7 +36,7 @@ struct cplb_entry dcplb_tbl[MAX_CPLBS];
 int first_switched_icplb, first_switched_dcplb;
 int first_mask_dcplb;
 
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
 {
 	int i_d, i_i;
 	unsigned long addr;
@@ -83,8 +83,18 @@ void __init generate_cpl_tables(void)
 	dcplb_tbl[i_d].addr = L1_DATA_A_START;
 	dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
 #endif
+#if L1_CODE_LENGTH > 0
 	icplb_tbl[i_i].addr = L1_CODE_START;
 	icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+#endif
+
+	/* Cover L2 memory */
+#if L2_LENGTH > 0
+	dcplb_tbl[i_d].addr = L2_START;
+	dcplb_tbl[i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+	icplb_tbl[i_i].addr = L2_START;
+	icplb_tbl[i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+#endif
 
 	first_mask_dcplb = i_d;
 	first_switched_dcplb = i_d + (1 << page_mask_order);

arch/blackfin/kernel/cplb-mpu/cplbmgr.c

@@ -322,9 +322,11 @@ int cplb_hdr(int seqstat, struct pt_regs *regs)
 void flush_switched_cplbs(void)
 {
 	int i;
+	unsigned long flags;
 
 	nr_cplb_flush++;
 
+	local_irq_save(flags);
 	disable_icplb();
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
 		icplb_tbl[i].data = 0;
@@ -338,6 +340,8 @@ void flush_switched_cplbs(void)
 		bfin_write32(DCPLB_DATA0 + i * 4, 0);
 	}
 	enable_dcplb();
+	local_irq_restore(flags);
+
 }
 
 void set_mask_dcplbs(unsigned long *masks)
@@ -345,10 +349,15 @@ void set_mask_dcplbs(unsigned long *masks)
 	int i;
 	unsigned long addr = (unsigned long)masks;
 	unsigned long d_data;
-	current_rwx_mask = masks;
+	unsigned long flags;
 
-	if (!masks)
+	if (!masks) {
+		current_rwx_mask = masks;
 		return;
+	}
+
+	local_irq_save(flags);
+	current_rwx_mask = masks;
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
@@ -367,4 +376,5 @@ void set_mask_dcplbs(unsigned long *masks)
 		addr += PAGE_SIZE;
 	}
 	enable_dcplb();
+	local_irq_restore(flags);
 }

arch/blackfin/kernel/cplb-nompu/cplbinit.c

@@ -168,8 +168,8 @@ static struct cplb_desc cplb_data[] = {
 		.end = L2_START + L2_LENGTH,
 		.psize = SIZE_1M,
 		.attr = SWITCH_T | I_CPLB | D_CPLB,
-		.i_conf = L2_MEMORY,
-		.d_conf = L2_MEMORY,
+		.i_conf = L2_IMEMORY,
+		.d_conf = L2_DMEMORY,
 		.valid = (L2_LENGTH > 0),
 		.name = "L2 Memory",
 	},
@@ -308,7 +308,7 @@ __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
 	}
 }
 
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
 {
 
 	u16 i, j, process;

arch/blackfin/kernel/early_printk.c

@@ -35,6 +35,9 @@
 extern struct console *bfin_earlyserial_init(unsigned int port,
 						unsigned int cflag);
 #endif
+#ifdef CONFIG_BFIN_JTAG_COMM
+extern struct console *bfin_jc_early_init(void);
+#endif
 
 static struct console *early_console;
 
@@ -142,6 +145,15 @@ int __init setup_early_printk(char *buf)
 		early_console = earlyserial_init(buf);
 	}
 #endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM
+	/* Check for Blackfin JTAG */
+	if (!strncmp(buf, "jtag", 4)) {
+		buf += 4;
+		early_console = bfin_jc_early_init();
+	}
+#endif
+
 #ifdef CONFIG_FB
 		/* TODO: add framebuffer console support */
 #endif

arch/blackfin/kernel/ptrace.c

@@ -46,7 +46,6 @@
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
 
-#define MAX_SHARED_LIBS 3
 #define TEXT_OFFSET 0
 /*
  * does not yet catch signals sent when the child dies.
@@ -161,21 +160,32 @@ static inline int is_user_addr_valid(struct task_struct *child,
 	struct vm_list_struct *vml;
 	struct sram_list_struct *sraml;
 
+	/* overflow */
+	if (start + len < start)
+		return -EIO;
+
 	for (vml = child->mm->context.vmlist; vml; vml = vml->next)
-		if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end)
+		if (start >= vml->vma->vm_start && start + len < vml->vma->vm_end)
 			return 0;
 
 	for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
 		if (start >= (unsigned long)sraml->addr
-		    && start + len <= (unsigned long)sraml->addr + sraml->length)
+		    && start + len < (unsigned long)sraml->addr + sraml->length)
 			return 0;
 
-	if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END)
+	if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
 		return 0;
 
 	return -EIO;
 }
 
+void ptrace_enable(struct task_struct *child)
+{
+	unsigned long tmp;
+	tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
+	put_reg(child, PT_SYSCFG, tmp);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -192,14 +202,12 @@ void ptrace_disable(struct task_struct *child)
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
-	int add = 0;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKDATA:
 		pr_debug("ptrace: PEEKDATA\n");
-		add = MAX_SHARED_LIBS * 4;	/* space between text and data */
 		/* fall through */
 	case PTRACE_PEEKTEXT:	/* read word at location addr. */
 		{
@@ -207,40 +215,35 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			int copied;
 
 			ret = -EIO;
-			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add,
-			         sizeof(data));
-			if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0)
+			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %ld\n", addr, sizeof(data));
+			if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-#if L1_CODE_LENGTH != 0
-			if (addr + add >= L1_CODE_START
-			    && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
-				safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
+			if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+			    && addr + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
+				safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-#if L1_DATA_A_LENGTH != 0
-			if (addr + add >= L1_DATA_A_START
-			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+			    && addr + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-#if L1_DATA_B_LENGTH != 0
-			if (addr + add >= L1_DATA_B_START
-			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+			    && addr + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
-			} else
-#endif
-			if (addr + add >= FIXED_CODE_START
-			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+			} else if (addr >= FIXED_CODE_START
+			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
+				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
+
 			} else
-				copied = access_process_vm(child, addr + add, &tmp,
+				copied = access_process_vm(child, addr, &tmp,
 							   sizeof(tmp), 0);
+
 			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
 			if (copied != sizeof(tmp))
 				break;
@@ -284,47 +287,43 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
-		printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+		pr_debug("ptrace: PTRACE_PEEKDATA\n");
 		/* fall through */
 	case PTRACE_POKETEXT:	/* write the word at location addr. */
 		{
 			int copied;
 
 			ret = -EIO;
-			pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n",
-			         addr, add, sizeof(data), data);
-			if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0)
+			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %ld bytes %lx\n",
+			         addr, sizeof(data), data);
+			if (is_user_addr_valid(child, addr, sizeof(data)) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-#if L1_CODE_LENGTH != 0
-			if (addr + add >= L1_CODE_START
-			    && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
-				safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
+			if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+			    && addr + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
+				safe_dma_memcpy ((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-#if L1_DATA_A_LENGTH != 0
-			if (addr + add >= L1_DATA_A_START
-			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+			    && addr + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-#if L1_DATA_B_LENGTH != 0
-			if (addr + add >= L1_DATA_B_START
-			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+			    && addr + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
-			} else
-#endif
-			if (addr + add >= FIXED_CODE_START
-			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr + add), &data, sizeof(data));
+
+			} else if (addr >= FIXED_CODE_START
+			    && addr + sizeof(data) <= FIXED_CODE_END) {
+				memcpy((void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
+
 			} else
-				copied = access_process_vm(child, addr + add, &data,
+				copied = access_process_vm(child, addr, &data,
 							   sizeof(data), 1);
+
 			pr_debug("ptrace: copied size %d\n", copied);
 			if (copied != sizeof(data))
 				break;
@@ -351,11 +350,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:
-		{		/* restart after signal. */
-			long tmp;
-
-			pr_debug("ptrace_cont\n");
+	case PTRACE_CONT:	/* restart after signal. */
+		pr_debug("ptrace: syscall/cont\n");
 
 		ret = -EIO;
 		if (!valid_signal(data))
@@ -364,16 +360,12 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		else
 			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
 		child->exit_code = data;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
-			pr_debug("before wake_up_process\n");
+		ptrace_disable(child);
+		pr_debug("ptrace: before wake_up_process\n");
 		wake_up_process(child);
 		ret = 0;
 		break;
-		}
 
 	/*
 	 * make the child exit.  Best I can do is send it a sigkill.
@@ -381,55 +373,37 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	 * exit.
 	 */
 	case PTRACE_KILL:
-		{
-			long tmp;
 		ret = 0;
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			break;
 		child->exit_code = SIGKILL;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
+		ptrace_disable(child);
 		wake_up_process(child);
 		break;
-		}
 
-	case PTRACE_SINGLESTEP:
-		{		/* set the trap flag. */
-			long tmp;
-
-			pr_debug("single step\n");
+	case PTRACE_SINGLESTEP:	/* set the trap flag. */
+		pr_debug("ptrace: single step\n");
 		ret = -EIO;
 		if (!valid_signal(data))
 			break;
 		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
-			put_reg(child, PT_SYSCFG, tmp);
-
+		ptrace_enable(child);
 		child->exit_code = data;
-			/* give it a chance to run. */
 		wake_up_process(child);
 		ret = 0;
 		break;
-		}
 
 	case PTRACE_GETREGS:
-		{
-
 		/* Get all gp regs from the child. */
 		ret = ptrace_getregs(child, datap);
 		break;
-		}
 
 	case PTRACE_SETREGS:
-		{
-			printk(KERN_NOTICE
-			       "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
+		printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
 		/* Set all gp regs in the child. */
 		ret = 0;
 		break;
-		}
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -440,7 +414,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 asmlinkage void syscall_trace(void)
 {
-
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return;
 

arch/blackfin/kernel/reboot.c

@@ -10,6 +10,7 @@
 #include <asm/bfin-global.h>
 #include <asm/reboot.h>
 #include <asm/system.h>
+#include <asm/bfrom.h>
 
 /* A system soft reset makes external memory unusable so force
  * this function into L1.  We use the compiler ssync here rather
@@ -20,7 +21,7 @@
  * the core reset.
  */
 __attribute__((l1_text))
-void bfin_reset(void)
+static void bfin_reset(void)
 {
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
@@ -34,15 +35,15 @@ void bfin_reset(void)
 		bfin_write_SWRST(0x7);
 
 		/* Due to the way reset is handled in the hardware, we need
-		 * to delay for 7 SCLKS.  The only reliable way to do this is
-		 * to calculate the CCLK/SCLK ratio and multiply 7.  For now,
+		 * to delay for 10 SCLKS.  The only reliable way to do this is
+		 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
 		 * we'll assume worse case which is a 1:15 ratio.
 		 */
 		asm(
 			"LSETUP (1f, 1f) LC0 = %0\n"
 			"1: nop;"
 			:
-			: "a" (15 * 7)
+			: "a" (15 * 10)
 			: "LC0", "LB0", "LT0"
 		);
 
@@ -74,7 +75,14 @@ void machine_restart(char *cmd)
 {
 	native_machine_restart(cmd);
 	local_irq_disable();
+	if (ANOMALY_05000353 || ANOMALY_05000386)
 		bfin_reset();
+	else
+		/* the bootrom checks to see how it was reset and will
+		 * automatically perform a software reset for us when
+		 * it starts executing boot
+		 */
+		asm("raise 1;");
 }
 
 __attribute__((weak))

arch/blackfin/kernel/setup.c

@@ -42,6 +42,7 @@ EXPORT_SYMBOL(memory_start);
 EXPORT_SYMBOL(memory_end);
 EXPORT_SYMBOL(physical_mem_end);
 EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
 
 #ifdef CONFIG_MTD_UCLINUX
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
@@ -52,7 +53,8 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned int __initdata *__retx;
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+	*init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -77,10 +79,10 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
 static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
 static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
 
-void __init bf53x_cache_init(void)
+void __init bfin_cache_init(void)
 {
 #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
-	generate_cpl_tables();
+	generate_cplb_tables();
 #endif
 
 #ifdef CONFIG_BFIN_ICACHE
@@ -100,7 +102,7 @@ void __init bf53x_cache_init(void)
 #endif
 }
 
-void __init bf53x_relocate_l1_mem(void)
+void __init bfin_relocate_l1_mem(void)
 {
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
@@ -410,7 +412,7 @@ static __init void parse_cmdline_early(char *cmdline_p)
  *  [_rambase, _ramstart]:		kernel image
  *  [memory_start, memory_end]:		dynamic memory managed by kernel
  *  [memory_end, _ramend]:		reserved memory
- *  	[meory_mtd_start(memory_end),
+ *  	[memory_mtd_start(memory_end),
  *  		memory_mtd_start + mtd_size]:	rootfs (if any)
  *	[_ramend - DMA_UNCACHED_REGION,
  *		_ramend]:			uncached DMA region
@@ -782,16 +784,25 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
-	/* If we double fault, reset the system - otherwise we hang forever */
-	bfin_write_SWRST(DOUBLE_FAULT);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+	bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
 
-	if (_bfin_swrst & RESET_DOUBLE)
-		/*
-		 * don't decode the address, since you don't know if this
-		 * kernel's symbol map is the same as the crashing kernel
-		 */
-		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
-	else if (_bfin_swrst & RESET_WDOG)
+	if (_bfin_swrst & RESET_DOUBLE) {
+		printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+		/* We assume the crashing kernel, and the current symbol table match */
+		printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+			(int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+		printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+			init_retx);
+	} else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
@@ -803,6 +814,11 @@ void __init setup_arch(char **cmdline_p)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
 	else
 		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
+
+	if (unlikely(CPUID != bfin_cpuid()))
+		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+			CPU, bfin_cpuid(), bfin_revid());
+	else {
 		if (bfin_revid() != bfin_compiled_revid()) {
 			if (bfin_compiled_revid() == -1)
 				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
@@ -811,9 +827,11 @@ void __init setup_arch(char **cmdline_p)
 				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 				       bfin_compiled_revid(), bfin_revid());
 		}
-	if (bfin_revid() < SUPPORTED_REVID)
+		if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
 			printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
 			       CPU, bfin_revid());
+	}
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -850,7 +868,7 @@ void __init setup_arch(char **cmdline_p)
 		!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
 
 	init_exception_vectors();
-	bf53x_cache_init();
+	bfin_cache_init();
 }
 
 static int __init topology_init(void)
@@ -986,13 +1004,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	seq_printf(m, "processor\t: %d\n"
-		"vendor_id\t: %s\n"
-		"cpu family\t: 0x%x\n"
-		"model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+		"vendor_id\t: %s\n",
+		*(unsigned int *)v,
+		vendor);
+
+	if (CPUID == bfin_cpuid())
+		seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+	else
+		seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+			CPUID, bfin_cpuid());
+
+	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
 		"stepping\t: %d\n",
-		0,
-		vendor,
-		(bfin_read_CHIPID() & CHIPID_FAMILY),
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1038,7 +1061,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
-	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
@@ -1127,12 +1150,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+	if (*pos == 0)
+		*pos = first_cpu(cpu_online_map);
+	if (*pos >= num_online_cpus())
+		return NULL;
+
+	return pos;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	++*pos;
+	*pos = next_cpu(*pos, cpu_online_map);
+
 	return c_start(m, pos);
 }
 

arch/blackfin/mach-bf527/boards/Kconfig

@@ -14,4 +14,9 @@ config BFIN527_BLUETECHNIX_CM
 	help
 	  CM-BF527 support for EVAL- and DEV-Board.
 
+config BFIN526_EZBRD
+	bool "BF526-EZBRD"
+	help
+	  BF526-EZBRD/EZKIT Lite board support.
+
 endchoice

arch/blackfin/mach-bf527/boards/Makefile

@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
+obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -43,10 +43,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -130,6 +127,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PF11,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -138,7 +145,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -201,7 +208,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -42,10 +42,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -129,6 +126,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PG13,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -137,7 +144,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -218,7 +225,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
@@ -846,6 +853,38 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <linux/input.h>
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -962,6 +1001,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif

arch/blackfin/mach-bf527/head.S

@@ -87,6 +87,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	r0 = BITSET(r0, 15);             /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */

arch/blackfin/mach-bf527/include/mach/anomaly.h

@@ -7,12 +7,24 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+# define ANOMALY_BF526 1
+#else
+# define ANOMALY_BF526 0
+#endif
+#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
+# define ANOMALY_BF527 1
+#else
+# define ANOMALY_BF527 0
+#endif
+
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
@@ -23,68 +35,124 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* New Feature: EMAC TX DMA Word Alignment */
-#define ANOMALY_05000285 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
 /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (ANOMALY_BF527)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
+#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
+#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (1)
+#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (1)
+#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (1)
+#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
+#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (ANOMALY_BF526)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (1)
+#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
-/* New Feature: Higher Default CCLK Rate */
-#define ANOMALY_05000368 (1)
+/* Incorrect Default CSEL Value in PLL_DIV */
+#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (1)
-/* USB Full-speed Mode not Fully Tested */
-#define ANOMALY_05000381 (1)
-/* New Feature: Boot from OTP Memory */
-#define ANOMALY_05000385 (1)
-/* New Feature: bfrom_SysControl() Routine */
-#define ANOMALY_05000386 (1)
-/* New Feature: Programmable Preboot Settings */
-#define ANOMALY_05000387 (1)
+#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
+/* Host Must Not Read Back During Host DMA Boot */
+#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (1)
-/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (1)
-/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (1)
-/* New Feature: Log Buffer Functionality */
-#define ANOMALY_05000394 (1)
-/* New Feature: Hook Routine Functionality */
-#define ANOMALY_05000395 (1)
-/* New Feature: Header Indirect Bit */
-#define ANOMALY_05000396 (1)
-/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
-#define ANOMALY_05000397 (1)
-/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
-#define ANOMALY_05000398 (1)
-/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
-#define ANOMALY_05000399 (1)
+#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
+#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
+#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (1)
+#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* Incorrect Default Internal Voltage Regulator Setting */
+#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* DEB2_URGENT Bit Not Functional */
+#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
+#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
+#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
+#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+/* Internal Voltage Regulator Not Trimmed */
+#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
+#define ANOMALY_05000432 (ANOMALY_BF526)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -97,6 +165,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)

arch/blackfin/mach-bf527/include/mach/bf527.h

@@ -30,8 +30,6 @@
 #ifndef __MACH_BF527_H__
 #define __MACH_BF527_H__
 
-#define SUPPORTED_REVID 2
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -112,16 +110,31 @@
 
 #ifdef CONFIG_BF527
 #define CPU "BF527"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF526
+#define CPU "BF526"
+#define CPUID 0x27e4
 #endif
 #ifdef CONFIG_BF525
 #define CPU "BF525"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF524
+#define CPU "BF524"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF523
+#define CPU "BF523"
+#define CPUID 0x27e4
 #endif
 #ifdef CONFIG_BF522
 #define CPU "BF522"
+#define CPUID 0x27e4
 #endif
+
 #ifndef CPU
-#define	CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif				/* __MACH_BF527_H__  */

arch/blackfin/mach-bf527/include/mach/defBF52x_base.h

@@ -1840,6 +1840,33 @@
 
 #define                 DPRESCALE  0xf        /* Load Counter Register */
 
+/* CNT_COMMAND bit field options */
+
+#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_CONFIG bit field options */
+
+#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
+#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
+#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
+#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
+#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
+
+#define BNDMODE_COMP     0x0000  /* boundary compare mode */
+#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
+#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
+#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
+
 /* Bit masks for OTP_CONTROL */
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */

arch/blackfin/mach-bf527/include/mach/portmux.h

@@ -67,6 +67,10 @@
 #define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
 #endif
 
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
+
 #define P_HWAIT		(P_DONTCARE)
 
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))

arch/blackfin/mach-bf533/boards/H8606.c

@@ -9,7 +9,7 @@
  * Modified:
  *               Copyright 2005 National ICT Australia (NICTA)
  *               Copyright 2004-2006 Analog Devices Inc
- *		 Copyright 2007 HV Sistemas S.L.
+ *		 Copyright 2007,2008 HV Sistemas S.L.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -64,18 +64,18 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
-		.end	= 0x20300000 + 1,
+		.end	= 0x20300002,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 0x20300000 + 4,
-		.end	= 0x20300000 + 5,
+		.start	= 0x20300004,
+		.end	= 0x20300006,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
 		.start	= IRQ_PF10,
 		.end	= IRQ_PF10,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
 	},
 };
 
@@ -140,18 +140,22 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader(spi)",
-		.size = 0x00060000,
+		.name = "bootloader (spi)",
+		.size = 0x40000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel(spi)",
-		.size = 0x100000,
-		.offset = 0x60000
+		.name = "fpga (spi)",
+		.size =   0x30000,
+		.offset = 0x40000
 	}, {
-		.name = "file system(spi)",
-		.size = 0x6a0000,
-		.offset = 0x00160000,
+		.name = "linux kernel (spi)",
+		.size =   0x150000,
+		.offset =  0x70000
+	}, {
+		.name = "jffs2 root file system (spi)",
+		.size =   0x640000,
+		.offset = 0x1c0000,
 	}
 };
 
@@ -340,7 +344,7 @@ static struct platform_device bfin_sir_device = {
 
 static struct plat_serial8250_port serial8250_platform_data [] = {
 	{
-		.membase = 0x20200000,
+		.membase = (void *)0x20200000,
 		.mapbase = 0x20200000,
 		.irq = IRQ_PF8,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
@@ -348,7 +352,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = {
 		.regshift = 1,
 		.uartclk = 66666667,
 	}, {
-		.membase = 0x20200010,
+		.membase = (void *)0x20200010,
 		.mapbase = 0x20200010,
 		.irq = IRQ_PF8,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,

arch/blackfin/mach-bf533/head.S

@@ -78,6 +78,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	r0 = BITSET(r0, 15);             /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */