From 536f6b91d21b81bec6c8a675b3a00052ee05f986 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Thu, 16 Oct 2014 09:58:05 -0700 Subject: [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC We've already got a reset of DMA after it's done. Add one before we start DMA too. This fixes a data corruption on Rockchip SoCs which will get bad data when doing a DMA transfer after doing a PIO transfer. We tested this on an Exynos 5800 with HS200 and didn't notice any difference in sequential read throughput. Signed-off-by: Sonny Rao Signed-off-by: Doug Anderson Tested-by: Doug Anderson Acked-by: Jaehoon Chung Tested-by: Jaehoon Chung Reviewed-by: Alim Akhtar Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 69f0cc68d5b2..ca67f6923bfd 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -83,6 +83,7 @@ struct idmac_desc { #endif /* CONFIG_MMC_DW_IDMAC */ static bool dw_mci_reset(struct dw_mci *host); +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); #if defined(CONFIG_DEBUG_FS) static int dw_mci_req_show(struct seq_file *s, void *v) @@ -448,6 +449,10 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) dw_mci_translate_sglist(host, host->data, sg_len); + /* Make sure to reset DMA in case we did PIO before this */ + dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET); + dw_mci_idmac_reset(host); + /* Select IDMAC interface */ temp = mci_readl(host, CTRL); temp |= SDMMC_CTRL_USE_IDMAC; -- GitLab