diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 1984a6e89e84450b55c7798b83a7232f2f16e6a8..261f86d102e8ba520105dfd10efac3930a9d7a12 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -541,29 +541,11 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return -EINVAL; } -static int ahci_is_device_present(void __iomem *port_mmio) -{ - u8 status = readl(port_mmio + PORT_TFDATA) & 0xff; - - /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */ - if (status & (ATA_BUSY | ATA_DRQ)) - return 0; - - /* Make sure PxSSTS.DET is 3h */ - status = readl(port_mmio + PORT_SCR_STAT) & 0xf; - if (status != 3) - return 0; - return 1; -} - void ahci_start_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 tmp; - if (!ahci_is_device_present(port_mmio)) - return; - /* start DMA */ tmp = readl(port_mmio + PORT_CMD); tmp |= PORT_CMD_START; @@ -1892,6 +1874,9 @@ static void ahci_error_handler(struct ata_port *ap) } sata_pmp_error_handler(ap); + + if (!ata_dev_enabled(ap->link.device)) + ahci_stop_engine(ap); } static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index e9250514734b14d77591187e65c7a062cc917117..70b58fe9e5b109cf68925c0d2c7568233bf0583b 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -539,12 +539,12 @@ static void sil24_config_port(struct ata_port *ap) writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); /* zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); + writew(0x8000, port + PORT_DECODE_ERR_THRESH); + writew(0x8000, port + PORT_CRC_ERR_THRESH); + writew(0x8000, port + PORT_HSHK_ERR_THRESH); + writew(0x0000, port + PORT_DECODE_ERR_CNT); + writew(0x0000, port + PORT_CRC_ERR_CNT); + writew(0x0000, port + PORT_HSHK_ERR_CNT); /* always use 64bit activation */ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 0ecd0f6aa2c068865996588ceafab8c95d23ddb8..4730c42a5ee58c54a295dc6a72e493f7b91cd411 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -578,10 +578,24 @@ static void svia_configure(struct pci_dev *pdev) /* * vt6421 has problems talking to some drives. The following - * is the magic fix from Joseph Chan . - * Please add proper documentation if possible. + * is the fix from Joseph Chan . + * + * When host issues HOLD, device may send up to 20DW of data + * before acknowledging it with HOLDA and the host should be + * able to buffer them in FIFO. Unfortunately, some WD drives + * send upto 40DW before acknowledging HOLD and, in the + * default configuration, this ends up overflowing vt6421's + * FIFO, making the controller abort the transaction with + * R_ERR. + * + * Rx52[2] is the internal 128DW FIFO Flow control watermark + * adjusting mechanism enable bit and the default value 0 + * means host will issue HOLD to device when the left FIFO + * size goes below 32DW. Setting it to 1 makes the watermark + * 64DW. * * https://bugzilla.kernel.org/show_bug.cgi?id=15173 + * http://article.gmane.org/gmane.linux.ide/46352 */ if (pdev->device == 0x3249) { pci_read_config_byte(pdev, 0x52, &tmp8); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b7512cf08c58ea665c2b4afce6aaac7ca9ddf13a..477345d416417c58662ea8386a0841ba65d0dd72 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1457,7 +1457,8 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) conf5 &= ~(1 << 24); /* Clear bit 24 */ switch (pdev->device) { - case PCI_DEVICE_ID_JMICRON_JMB360: + case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ + case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ /* The controller should be in single function ahci mode */ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ break; @@ -1493,12 +1494,14 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f149dd10908ba3a5d38df5a6252ef1100aa4243e..4eb467910a45a34e2638c9fddb8a92cc09b50177 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2321,6 +2321,7 @@ #define PCI_VENDOR_ID_JMICRON 0x197B #define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 #define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 +#define PCI_DEVICE_ID_JMICRON_JMB362 0x2362 #define PCI_DEVICE_ID_JMICRON_JMB363 0x2363 #define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366