From 48371cd3f4226275c529bb8675a99572db19cc7c Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Wed, 2 Dec 2009 06:18:03 +0100 Subject: [PATCH] ARM: 5845/1: l2x0: check whether l2x0 already enabled If running in non-secure mode accessing some registers of l2x0 will fault. So check if l2x0 is already enabled, if so do not access those secure registers. Signed-off-by: srinidhi kasagar Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b480f1d3591f..747f9a9021bb 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -99,18 +99,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) l2x0_base = base; - /* disable L2X0 */ - writel(0, l2x0_base + L2X0_CTRL); + /* + * Check if l2x0 controller is already enabled. + * If you are booting from non-secure mode + * accessing the below registers will fault. + */ + if (!(readl(l2x0_base + L2X0_CTRL) & 1)) { - aux = readl(l2x0_base + L2X0_AUX_CTRL); - aux &= aux_mask; - aux |= aux_val; - writel(aux, l2x0_base + L2X0_AUX_CTRL); + /* l2x0 controller is disabled */ - l2x0_inv_all(); + aux = readl(l2x0_base + L2X0_AUX_CTRL); + aux &= aux_mask; + aux |= aux_val; + writel(aux, l2x0_base + L2X0_AUX_CTRL); - /* enable L2X0 */ - writel(1, l2x0_base + L2X0_CTRL); + l2x0_inv_all(); + + /* enable L2X0 */ + writel(1, l2x0_base + L2X0_CTRL); + } outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; -- GitLab