diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 96f05b29c9ad23ba6c0874a29dc2066c16806476..79781461eec97ad27c4986178266a63034f4693f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
 		}
 
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
 		 */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 42a22b8e692262fde4eab6b2133fc6cf485555a7..0e4b25fa3bcd262a898d6337aeeb9b6cec7b5600 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	struct xhci_input_control_ctx *ctrl_ctx;
 	u32			port_num;
 	struct usb_device *top_dev;
 
@@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		return -EINVAL;
 	}
 	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
-	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 940321b3ec68b477549a38d4016ee047fb7a72a7..9f1d4b15d818553fc488c8651a14d0e4b3301f66 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	struct xhci_ring *ring;
 	struct xhci_td *cur_td;
 	int ret, i, j;
+	unsigned long flags;
 
 	ep = (struct xhci_virt_ep *) arg;
 	xhci = ep->xhci;
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 
 	ep->stop_cmds_pending--;
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
 		xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 				"xHCI as DYING, exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 	if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 		xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 				"exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
@@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	xhci->xhc_state |= XHCI_STATE_DYING;
 	/* Disable interrupts from the host controller and start halting it */
 	xhci_quiesce(xhci);
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	ret = xhci_halt(xhci);
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
@@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 			}
 		}
 	}
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
 	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1ff95a0df576762000796440a9b82aae53832718..747c5ead922bbc9cc93506d7f0f996bc8f0c5033 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3504,6 +3504,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Otherwise, update the control endpoint ring enqueue pointer. */
 	else
 		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
@@ -3585,7 +3589,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
 		+ 1;
 	/* Zero the input context control for later use */
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;