From 45a2005e9354f8bcf2333a8bc8cc4b26a927d042 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Wed, 28 Jun 2017 13:42:35 -0500 Subject: [PATCH] amd-xgbe: Limit the I2C error messages that are output When I2C communication fails, it tends to always fail. Rather than continuously issue an error message (once per second in most cases), change the message to be issued just once. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index b8be62e273c0..04b5c149caca 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -1121,7 +1121,8 @@ static int xgbe_phy_sfp_read_eeprom(struct xgbe_prv_data *pdata) ret = xgbe_phy_sfp_get_mux(pdata); if (ret) { - netdev_err(pdata->netdev, "I2C error setting SFP MUX\n"); + dev_err_once(pdata->dev, "%s: I2C error setting SFP MUX\n", + netdev_name(pdata->netdev)); return ret; } @@ -1131,7 +1132,8 @@ static int xgbe_phy_sfp_read_eeprom(struct xgbe_prv_data *pdata) &eeprom_addr, sizeof(eeprom_addr), &sfp_eeprom, sizeof(sfp_eeprom)); if (ret) { - netdev_err(pdata->netdev, "I2C error reading SFP EEPROM\n"); + dev_err_once(pdata->dev, "%s: I2C error reading SFP EEPROM\n", + netdev_name(pdata->netdev)); goto put; } @@ -1190,7 +1192,8 @@ static void xgbe_phy_sfp_signals(struct xgbe_prv_data *pdata) &gpio_reg, sizeof(gpio_reg), gpio_ports, sizeof(gpio_ports)); if (ret) { - netdev_err(pdata->netdev, "I2C error reading SFP GPIOs\n"); + dev_err_once(pdata->dev, "%s: I2C error reading SFP GPIOs\n", + netdev_name(pdata->netdev)); return; } -- GitLab