diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index b3a235c8ed8526bc440019dd3d28d31542605e9b..f323ce507f58a15bc6e31b1215c6375a9d8668cf 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -667,8 +667,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) udelay(1); if (hw->phy.autoneg_wait_to_complete) { - e_dbg("Waiting for forced speed/duplex link " - "on GG82563 phy.\n"); + e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, 100000, &link); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 6a6e6f6d9e73c72a74a613971a07d71dc0331670..53e5447cbbca808d2eec3f821db47df328903d72 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -902,8 +902,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - e_dbg("Failed to acquire the semaphore, FW or HW has it: " - "FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n", + e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n", er32(FWSM), extcnf_ctrl); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); @@ -2132,8 +2131,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - e_dbg("Unable to determine valid NVM bank via EEC - " - "reading flash signature\n"); + e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n"); /* fall-thru */ default: /* set bank to 0 in case flash read fails */ @@ -2245,8 +2243,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Check if the flash descriptor is valid */ if (hsfsts.hsf_status.fldesvalid == 0) { - e_dbg("Flash descriptor invalid. " - "SW Sequencing must be used.\n"); + e_dbg("Flash descriptor invalid. SW Sequencing must be used.\n"); return -E1000_ERR_NVM; } @@ -2446,8 +2443,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; } else if (hsfsts.hsf_status.flcdone == 0) { - e_dbg("Timeout error - flash cycle " - "did not complete.\n"); + e_dbg("Timeout error - flash cycle did not complete.\n"); break; } } @@ -2798,8 +2794,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; if (hsfsts.hsf_status.flcdone == 0) { - e_dbg("Timeout error - flash cycle " - "did not complete."); + e_dbg("Timeout error - flash cycle did not complete.\n"); break; } } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); diff --git a/drivers/net/ethernet/intel/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/lib.c index 78e3f4c0c3678ba42b0d9697d7fa154326d93036..e2678bda85992d9e93747158917d4be53ab66b7b 100644 --- a/drivers/net/ethernet/intel/e1000e/lib.c +++ b/drivers/net/ethernet/intel/e1000e/lib.c @@ -653,12 +653,10 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - e_dbg("SERDES: Link up - autoneg " - "completed successfully.\n"); + e_dbg("SERDES: Link up - autoneg completed successfully.\n"); } else { mac->serdes_has_link = false; - e_dbg("SERDES: Link down - invalid" - "codewords detected in autoneg.\n"); + e_dbg("SERDES: Link down - invalid codewords detected in autoneg.\n"); } } else { mac->serdes_has_link = false; @@ -1118,8 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - e_dbg("Copper PHY and Auto Neg " - "has not completed.\n"); + e_dbg("Copper PHY and Auto Neg has not completed.\n"); return ret_val; } @@ -1183,11 +1180,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - e_dbg("Flow Control = FULL.\r\n"); + e_dbg("Flow Control = FULL.\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - e_dbg("Flow Control = " - "Rx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Rx PAUSE frames only.\n"); } } /* @@ -1203,7 +1199,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Tx PAUSE frames only.\n"); } /* * For transmitting PAUSE frames ONLY. @@ -1218,14 +1214,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Rx PAUSE frames only.\n"); } else { /* * Per the IEEE spec, at this point flow control * should be disabled. */ hw->fc.current_mode = e1000_fc_none; - e_dbg("Flow Control = NONE.\r\n"); + e_dbg("Flow Control = NONE.\n"); } /* diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 8666476cb9be4d723a3dc07f5feb66230aa86fb5..ed70d08db5b6fae46923c8745803a6bf497f3758 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1136,8 +1136,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = e1000_wait_autoneg(hw); if (ret_val) { - e_dbg("Error while waiting for " - "autoneg to complete\n"); + e_dbg("Error while waiting for autoneg to complete\n"); return ret_val; } }